Jump to content

Sign in to follow this  
richbonneau

Milviz King Air is RELEASED

Recommended Posts

When I power-up the avionics, is that sounds the cooling fans to keep the equipment temps under control or something else?

Even the external GPU has an audio start sequence.

Love being able to open the door externally with the handle.

So much detail, very impressive ... going to take me a while to map all these knobs/switches/button over to my GoFlight gear.

Cheers, Rob.

  • Like 1

Share this post


Link to post

Are you planning to do this as a GFIT profile Rob?  I was thinking I’d love to be able to use my MCPPRO at minimum with this.


Dave

Current System (Running at 1440p): ASUS ROG Maximus XII Hero Z490, i9 10900k @ 5.1Ghz, RTX2080ti, 32GB DDR4 3600 RAM, EVGA CLC 280mm AIO Cooler

Share this post


Link to post

The charts function does work but it isn't Navigraph charts. If you are willing to do a little prep work to put the charts in yourself you can have them. I'll put some instructions on  how I use it over on MV support if anyone is interested.

 

  • Upvote 2

Steve McNitt

Share this post


Link to post

We will be adding the Navigraph charts functionality in the SP.

  • Like 6
  • Upvote 1

Please contact oisin at milviz dot com for forum registration information.  Please provide proof of purchase if you want support.  Also, include the username you wish to have.
 

Share this post


Link to post

One CTD so far after pausing the Sim. I can live with that for the moment. But the permanent flickering with changing frequency is really annoying. How can I get rid of it ? I don't find the "preferences" setting mentioned few pages before.

Another problem: Prop and condition levers do not work reliably with the mouse. it's sometimes a mess to move them for-or backwards. 

Share this post


Link to post

Have you posted these in the support forums?


Please contact oisin at milviz dot com for forum registration information.  Please provide proof of purchase if you want support.  Also, include the username you wish to have.
 

Share this post


Link to post

Just to be sure, the support forums at milviz.com...


Please contact oisin at milviz dot com for forum registration information.  Please provide proof of purchase if you want support.  Also, include the username you wish to have.
 

Share this post


Link to post

I had flickering when running in a window.  Going to full screen mode stopped the flickering, as did turning on V-sync from within P3D, when in a window.  Nvidia 1050Ti, latest driver


Flight Dynamics at Milviz ( DHC-3T, PA-30, PC-6, KA-350i, and more... )

Share this post


Link to post

V-sync on and triple buffering improves the flickering but does not stop it in my case. I've no clue what the full screen mode does, but I'll look into this. I've tested several drivers including the latest but I did not notice significant differences.

Share this post


Link to post
2 hours ago, mmc71 said:

V-sync on and triple buffering improves the flickering but does not stop it in my case. I've no clue what the full screen mode does, but I'll look into this. I've tested several drivers including the latest but I did not notice significant differences.

It's not a driver issue it is  something Microsoft added to windows 10. Need to right click P3D icon, pick properties , then compatability tab and click the checkbox for "disable fullscreen optmizations" flashing will be gone and you can put VSYNC back off.

Edit: you wont loose any performance or FPS...several other "games" need this turned off as well because of the same issue. Google is your friend 🙂

As with all these things it doesn't affect everyone or every vid driver version etc etc. I don't care to troubleshoot this further and it is probably for naught so I'm not wasting anymore time on it.

This "optimization" is also known to cause lag in some games...

Edited by Slayer
  • Upvote 1

Steve McNitt

Share this post


Link to post
1 hour ago, Slayer said:

It's not a driver issue it is  something Microsoft added to windows 10. Need to right click P3D icon, pick properties , then compatability tab and click the checkbox for "disable fullscreen optmizations" flashing will be gone and you can put VSYNC back off.

Hmmm ... shouldn't need to do this if P3D has been updated to the latest version.

4 hours ago, mmc71 said:

I've tested several drivers including the latest but I did not notice significant differences.

Are you a Multi-GPU setup? (SLI/NVLink)?

What version is your Prepar3D.exe?

Are you sure TrueGlass was updated during Milviz install of 350 along with any C++ runtimes?

Cheers, Rob.

Share this post


Link to post
10 hours ago, Slayer said:

It's not a driver issue it is  something Microsoft added to windows 10. Need to right click P3D icon, pick properties , then compatability tab and click the checkbox for "disable fullscreen optmizations" flashing will be gone and you can put VSYNC back off.

Thanks a lot, that solved it for me. No flickering any more.

@Rob: The installation was without problems and the aircraft was installed as it should be. I checked this a couple of times. But with the setting above I don't  have graphics issues any more for now.

Share this post


Link to post
On 12/27/2019 at 10:08 AM, Rob_Ainscough said:

So much detail, very impressive ... going to take me a while to map all these knobs/switches/button over to my GoFlight gear.

 

Hello Rob,

 

have you ever tried LINDA?

I'm not sure if LINDA works with GF?

Would be good to know ... at least for simple switches. I expect that it wouldn't work with the GF MCP and similar more complex hardware. 


Guenter Steiner
--------------------------------------------------------------------------------------
LINDA Lua Integrated Non-complex Device Assigning

Betatester for: A2A, Hifi, Simstarter, AivlaSoft 
--------------------------------------------------------------------------------------

Share this post


Link to post

Hi Guys.  I just got the redux Milviz T-38 and the KA350 Super King Air and I can't get either of them to work.

I'm using the Saitek radio boxes, switch panels, throttles, and Cessna yoke/rudder pedals/trimwheel with for one and the Warthog HOTAS setup for the other and Spad Next for the interface. Not all the controls seem to work even when mapped correctly.

The KA350 has a gap in the front window seal (think that's been mentioned) and the T-38C has a landing gear lever with a knob where the alpha transparency is set too low and you can see through it.

They look great for the $140 I paid but I can't get them to start the engines -- and yes I read the manual.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    28%
    $7,145.00 of $25,000.00 Donate Now
×
×
  • Create New...