Jump to content

Sign in to follow this  
FlylowNslow

GoFlight Yoke Rudder TQ6

Recommended Posts

Message me for pics.

1. GoFlight GF-Pro Yoke System - Cockpit Control Module - NG 737 Yoke 

$900.00 PayPal shipped US. 

 

The GF-Pro Yoke System is built with precision manufacturing to ensure the most authentic flight among desk top yoke systems.  These units are all built with sturdy cast aluminum handle, while the chassis is made of durable steel sheet metal; both are finished with a long lasting powder coat.

These handles are modeled directly after a Boeing 737 with the same trim levers in the handle accompanied by a few other electronics we integrated to enhance the flight simmer experience. The chassis is built streamline, with a small profile which allows you to configure the unit into your simulator with minimal interference.

Features:

  • Push-to-Talk Switches
  • Elevator Trim Switch
  • Exterior View Selection
  • A/T Disengage
  • Interior View Hat Switch
  • Selectable Mouse Controller

Compatibility:

  • Microsoft Flight Simulator X
  • FSX: Steam Edition
  • Prepar3D
  • XPlane

2. GF-TQ6 Advanced Throttle Quadrant Commerical

$500.00 shipped US. 

 

Purchased new. Tried once. Like new current condition.
 
The following additional items purchased separately will be included for free:
 
1. TQ6 Clamp $49.00
2. Throttle handle kit $79.00
3. Free shipping. 

The GoFlight TQ6-ADV Throttle Quadrant is our top of the line throttle quadrant. This throttle quadrant replicates a commercial, twin-engine configuration and features integrated Take Off/Go Around (TOGA) switches, Auto Throttle Disengage buttons, and Reverse Thrust levers. Included in this set up are the Spoiler and Trim Lever. This throttle quadrant comes with a 6′ A/B USB cord and is plug-and-play ready after a quick calibration in your video game controller page. Built with the same high-quality, durable sheet metal, and powder coat finish this GoFlight Throttle Quadrant is built to last.

Description
  • Though the GF-TQ6 ADV is designed for twin-engine planes, this device works with any number of engines. The GF-TQ6 ADV works well with four engine wide-body planes, turbo-prop, and smaller jet engine regional planes. Simple set the controls in the configuration page to control the number of engines your plane has and the GF-TQ6 ADV can adapt to your specific needs.
  • The GF-TQ6 ADV can be configured within minutes using our FREE GF-Config software.
  • From the all-metal chassis to in-house final assembly in the USA. The electronic switches and potentiometers are all high cycle count components. Like all of our products, the attention to detail and craftsmanship of the GF-TQ6 ADV is unparalleled in the industry, you’re getting what you pay for- and more.
  • Compatibility

GoFlight’s GF-TQ6 ADV Advanced Throttle Quadrant is compatible with Prepar3D and FSX using our Free GF-Config software. Third Party support is available for other X-Plane.

Racks & Mounting Options

Mount your GF-TQ6 ADV to any desktop table with TQ6 Clamp.*

3. GF-RP-2 Rudder Pedals

$650.00 shipped US.

 

Additional software option: GoFlight Interface Tool (pollypot software) works with Yoke, Rudder, TQ6 and other Goflight equipment. For: FSX, P3Dv4, X-Plane.

Key Features

  • Full integration with the PMDG 737 NGX, 737 NGXu, 777 and 747 QOS II SDK's
  • Full integration with the iFly 747 and 737 SDK's.
  • Full integration of the Majestic Dash Q400 External XML Interface.
  • PMDG 737 NGX/NGXu and 777 are automatically configured with the MCP PRO, MCP, EFIS, LGT/II, GF45, GF46 and MESM which means all you need to do is enable the devices and they work straight away - no need to understand anything else about the GoFlight Interface Tool - its that easy! The SECM, TQ6 and GF166 can be auto configured via a simple button push.
  • PMDG 747 Queen Of The Skies II is now fully supported with the MCP PRO, MCP, EFIS, GF45, GF46 and the LGT/II automatically configured so the devices work straight away once they are enabled. The SECM, TQ6 and GF166 can be auto configured via a simple button push.
  • iFly 737 and iFly 747 are automatically configured with the MCP PRO, MCP, EFIS, LGT/II, GF45, GF46 and MESM (737 Only) which means all you need to do is enable the devices and they work straight away - no need to understand anything else about the GoFlight Interface Tool - its that easy! The SECM, TQ6 and GF166 can be auto configured via a simple button push.
  • Pre built configurations made by existing customers are available for other aircraft in the downloads area.
  • Configure all Simconnect events and variables (data) to all supported GoFlight hardware
  • All buttons, switches, selectors, rotaries, lights, displays and DIO attachments are supported
  • Identify normally hidden variables (called local variables or lvars) using the Detective tool
  • Track all events and lvar changes in real time using the Detective tool
  • Create Bespoke Events using simple point and click commands that can alter lvars and then assign these in the same way as Simconnect events
  • Local variables (lvars) can be assigned just like Simconnect variables
  • Create your own bespoke variables
  • Send key presses
  • Configure joystick axes and buttons
  • Set and read Simconnect variables
  • Now with integrated Lua support. Build and assign Lua scripts to GoFlight hardware to manipulate aircraft functions. Works with all aircraft including the PMDG NGX/NGXu/777/747 and iFly 737/747
  • Interface to FSUIPC4 to read and write memory refs (registered copy of FSUIPC required for these functions). FSUIPC5 only works when used with WideFS!
  • GF46 alerting service allows you to configure up-to 20 alerts that pop up on the device
  • Monitor an aircraft power variable to have all your GoFlight equipment power up or down. Also monitor a separate variable to control devices that only power up when Avionics power is available
  • Support for push and hold on suitable rotaries
  • No need to own FSUIPC as the software uses its own backend dll unless you wish to use the FSUIPC features that are interfaced

 

 

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    2%
    $565.00 of $25,000.00 Donate Now
×
×
  • Create New...