Jump to content
Sign in to follow this  
ark

P3Dv5 HF1 and the RXP GTN 750 /GNS 530

Recommended Posts

Just a heads-up that the HF1 update for P3Dv5 has caused some problems with the RXP GTN 750 -- may not follow flight plan or track the glide slope. RXP is working on a fix.  There are also some problems with the RXP GNS 530.

Al

Edited by ark

Share this post


Link to post
Share on other sites
13 minutes ago, ark said:

Just a heads-up that the HF1 update for P3Dv5 has caused some problems with the RXP GTN 750 -- may not follow flight plan or track the glide slope. RXP is working on a fix.  There are also some problems with the RXP GNS 530.

Al

The GTN-750 is working OK in the Falcon 50 (post-HF1) on my system. Both enroute course tracking and ILS (loc and g/s tracking) are fine.


Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites
20 minutes ago, JRBarrett said:

The GTN-750 is working OK in the Falcon 50 (post-HF1) on my system. Both enroute course tracking and ILS (loc and g/s tracking) are fine.

Hi Jim,

That's interesting because it doesn't track the GS (I should say GP) for me in the Lear35 in P3Dv5HF1, but does in P3Dv4.5. And on the RXP website there are a number of posts reporting problems, and Jean-Luc (the developer) has acknowledged he is working on an update. One of the users reporting a problem on the RXP site is Berk Pieke who is very knowledgeable when it comes to the GPS units, to say the least.

Are you using the latest version 2.5.24 of the RXP GTN750?  I should also clarify a bit, it was a GPS LPV approach that failed for me -- no GP tracking. I didn't check if an ILS works in VLOC.

Al

Edited by ark

Share this post


Link to post
Share on other sites

This happens to the RXP every time LM update P3D. The GNS/GTN works, but the autopilot doesn't follow the GNS flight plan. I believe an update is imminent.

  • Like 1

David Porrett

Share this post


Link to post
Share on other sites
10 hours ago, ark said:

Hi Jim,

That's interesting because it doesn't track the GS (I should say GP) for me in the Lear35 in P3Dv5HF1, but does in P3Dv4.5. And on the RXP website there are a number of posts reporting problems, and Jean-Luc (the developer) has acknowledged he is working on an update. One of the users reporting a problem on the RXP site is Berk Pieke who is very knowledgeable when it comes to the GPS units, to say the least.

Are you using the latest version 2.5.24 of the RXP GTN750?  I should also clarify a bit, it was a GPS LPV approach that failed for me -- no GP tracking. I didn't check if an ILS works in VLOC.

Al

Have not tried an LPV approach, but glideslope tracking was working fine on two ILS approaches I did in the Falcon at KILG and KTEB.

Have not flown the Lear in HF1 yet.

Jean Luc is very responsive, and quick to fix reported problems, which is why I would heartily recommend RXP GNS/GTN products over the competition!


Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites
45 minutes ago, JRBarrett said:

Jean Luc is very responsive, and quick to fix reported problems, which is why I would heartily recommend RXP GNS/GTN products over the competition!

Agree 100 percent!

Al

Share this post


Link to post
Share on other sites
17 hours ago, ark said:

Just a heads-up that the HF1 update for P3Dv5 has caused some problems with the RXP GTN 750 -- may not follow flight plan or track the glide slope. RXP is working on a fix.  There are also some problems with the RXP GNS 530.

Al

Hi Al,

I flew from FACT to FALE this afternoon in Flysimware's excellent Falcon 50 and using the RXP GTN 750 I experienced no problems. The flight plan was properly followed by the autopilot throughout and the LPV approach into King Shaka International also worked seamlessly. This was with the RXP GTN 750 version that was made available shortly after the release of P3Dv5.

Cheers,

Jerome

Share this post


Link to post
Share on other sites
3 hours ago, jzimmermann said:

Hi Al,

I flew from FACT to FALE this afternoon in Flysimware's excellent Falcon 50 and using the RXP GTN 750 I experienced no problems. The flight plan was properly followed by the autopilot throughout and the LPV approach into King Shaka International also worked seamlessly. This was with the RXP GTN 750 version that was made available shortly after the release of P3Dv5.

Cheers,

Jerome

Thanks for the input Jerome. I'm starting to think whether the RXP GTN750 works as it should with the latest P3Dv5HF1 depends on how each a/c AP was coded. I only have tried the Lear35 so far. I don't know what a/c Bert Pieke was talking about when he reported the AP would not follow the GTN 750 flight plan. In the Lear35 case it was only the Glide Path on an LPV approach that failed. All else seemed to work.

Al

Share this post


Link to post
Share on other sites
14 minutes ago, ark said:

Thanks for the input Jerome. I'm starting to think whether the RXP GTN750 works as it should with the latest P3Dv5HF1 depends on how each a/c AP was coded. I only have tried the Lear35 so far. I don't know what a/c Bert Pieke was talking about when he reported the AP would not follow the GTN 750 flight plan. In the Lear35 case it was only the Glide Path on an LPV approach that failed. All else seemed to work.

Al

I was using the Baytower RV7A and the RealAir Lancair..

V5 was fine with the RXP update, V5 HF1 is not.. the GTN is not steering the autopilot in GPS mode.. RXP is working on the next update, just hang tight for now.. :happy:

Edited by Bert Pieke
  • Upvote 1

Bert

Share this post


Link to post
Share on other sites
26 minutes ago, Bert Pieke said:

I was using the Baytower RV7A and the RealAir Lancair..

V5 was fine with the RXP update, V5 HF1 is not.. the GTN is not steering the autopilot in GPS mode.. RXP is working on the next update, just hang tight for now.. :happy:

Hi Bert -- thanks for the details.

4 hours ago, jzimmermann said:

Hi Al,

I flew from FACT to FALE this afternoon in Flysimware's excellent Falcon 50 and using the RXP GTN 750 I experienced no problems.

Jerome -- as Bert mentioned in the quote above, the problem shows up when using P3Dv5 with the recent Hot Fix1.  Where you using P3Dv5 with HF1 for you FACT to FALE flight above?

Thanks,

Al

Edited by ark

Share this post


Link to post
Share on other sites
11 hours ago, ark said:

Jerome -- as Bert mentioned in the quote above, the problem shows up when using P3Dv5 with the recent Hot Fix1.  Where you using P3Dv5 with HF1 for you FACT to FALE flight above?

Thanks,

Al

Hi Al,

Yes, absolutely, the latest P3Dv5 with HF1....no issues. I should add that it was a completely fresh install of everything.

Cheers,

Jerome

Share this post


Link to post
Share on other sites
19 minutes ago, jzimmermann said:

Hi Al,

Yes, absolutely, the latest P3Dv5 with HF1....no issues. I should add that it was a completely fresh install of everything.

Cheers,

Jerome

I also have had no problems with enroute navigation, ILS or LPV approaches. Like Jerome, I uninstalled the GTN prior to installing HF1, then reinstalled it afterwards, using the original installer.

 

  • Like 1

Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites

Strange, for me with V2.5.24, the autopilot  does not track the GPS course in NAV mode.  It just heads North..

Maybe the installer has been updated without an announcement.. :unsure:

Edited by Bert Pieke

Bert

Share this post


Link to post
Share on other sites
5 hours ago, JRBarrett said:

I also have had no problems with enroute navigation, ILS or LPV approaches. Like Jerome, I uninstalled the GTN prior to installing HF1, then reinstalled it afterwards, using the original installer.

 

 

5 hours ago, jzimmermann said:

Yes, absolutely, the latest P3Dv5 with HF1....no issues. I should add that it was a completely fresh install of everything.

 

Jim, Jerome,

Thanks for the info. If you have the Lear35, and if/when time permits, I'd be interested to learn if you get GP guidance during a LPV approach in the Lear 35.

Al

Edited by ark

Share this post


Link to post
Share on other sites

Hi Bert,

Is the GTN correctly configured as Master? I had something similar once and noticed that Master was unticked and setting it to Master fixed the issue.

Cheers,

Jerome

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...