Issues with AI aircraft sound timing

[ducaud 9]

I recently started using AIG Manager with OCI installation. I did this to be able to upgrade my FAIB models to use PBR textures. The automatic installation of the models was extremely good and simple.

The installation of the models also uses an external application for the different AI aircraft sounds. The software is Aitrsp v.1.8.

I am having an issue with the timing of some of the sounds, specifically the thrust reverser sounds.

For example, in the case of the FAIB 320’s the reverser sound starts 7 seconds after the animation of the cowling movement starts, and continue 7 seconds after the cowling is closed.

In the case of the FAIB CFM neo it is even worst, the animoation open the cowling, keepit open for about 10 seconds, then it closes, once the animation of the reversers close the cowling, then the sound starts.

I am trying to find out somebody that understand the logic of the soundai.cfg files to be able to adjust the timing of the sounds to coincide with animation.

here are the some examples of the areas in the soundai.cfg that deals with the reversers, If somebody is familiar with then, I appreciate the help in understanding their meaning, and see if it is possible to alter them to be able to improve the sound timing issue.

[rev]
filename=rev
flags=8
viewpoint=1
rparams=0.00,1.00,1.00,1.00
vparams=0.0,40.0,0.150,60.0,0.250,80.0,0.550,100.0,0.650,100.0,0.750,100.0,0.850,100.0,1.00,100.0
full_Scale_Distance=80
link=xidle

[revX]
filename=revX
flags=8
viewpoint=2
rparams=0.00,1.00,1.00,1.20
vparams=0.0,40.0,0.150,60.0,0.250,80.0,0.550,100.0,0.650,100.0,0.750,100.0,0.850,100.0,1.00,100.0
full_Scale_Distance=

[revAX]
filename=PowerX
flags=8
viewpoint=2
rparams=0.00,1.00,1.00,1.00
vparams=0.0,40.0,0.150,40.0,0.250,60.0,0.550,80.0,0.650,100.0,0.750,100.0,0.850,100.0,1.00,100.0
insideConeAngle=80
outsideConeAngle=360
conePitch=0.0
coneHeading=180.0
outsideConeVolume=9000
full_Scale_Distance=60
link=rev

Regards

Juan