FSPS : FFTF DYNAMIC P3Dv5 Released

[mpo910 2,112]

1 hour ago, f.skywalker said:

I have a problem since yesterday evening.

I get this message:  Offline usage limit reached. Application cannot connect with FSPS Servers. Please get online or allow traffic for FSPS applications thou your firewall"

 

It working before this message perfect.

 

The shop is down

 

Me too. Can not use it anymore. I didn´t even know there is a connection necessary for usage! This is annoying. I don´t like tools required a connection all/each time you want to use it. 

And now?

Marcus

[CanAmRyder 30]

I'm assuming it's going to be like this until they get the servers back up. I feel like this is the same way the Flight Sim Store went down.

Just waiting.

Keith

[IanHarrison 521]

I have had no problems all day. It is working at this moment.

[Achilles Philippopoulos 115]

Hi,

Its matter of 24..48h the global network to read the new dns servers

[Achilles Philippopoulos 115]

Hi,

Can anyone report any kind of problem? Things must be running as should be now.

[TomCYYZ 210]

I bought my copy off Simmarket and I just want to say, I am very pleased with FFTF Dynamics’ performance in P3Dv5.1 HF1. I must admit I do not totally understand it’s inner workings. I do not know if my settings are the best for me but I do notice increased performance in terms of smoother FPS. For the record I use a setting of 28 - 34 for Frames Scenario and 0.01 - 0.30 below 8000’ for AGL Height Scenario and couldn’t be more happy with the performance of my sim. I use Frames scenario for Altitudes higher than 8000’. It’s so easy to toggle back and forth while flying. IMO, this addon is the real deal. Glad I bought it. 

Regards

Edited December 5, 2020 by TomCYYZ

[brosss 27]

Can someone check and confirm that FFTF Dynamic (ver. 5.1.1226829) is working? Program starts normaly but it does nothing in AGL Height Scenario. Maybe servers issue? Regards.

[GSalden 4,656]

1 hour ago, brosss said:

Can someone check and confirm that FFTF Dynamic (ver. 5.1.1226829) is working? Program starts normaly but it does nothing in AGL Height Scenario. Maybe servers issue? Regards.

What do you mean by “does nothing in AGL” ?

 

[brosss 27]

29 minutes ago, GSalden said:

What do you mean by “does nothing in AGL” ?

 

I mean that FFTF Dynamic is set to AGL Height Scenario, AGL range feet - 0 - 10000, FFTF range 0.01 - 0.1. P3D v5 is internally blocked at 120 fps. Till today that setting was best for my setup - 40 - 50 fps on ground. Now i have 25 - 30 fps - it seems like FFTF Dynamic stays on 0.33 value. 

Edit: Nevermind Guys. It seems to be working now. It was one time stopper.

Edited December 21, 2020 by brosss

[GSalden 4,656]

43 minutes ago, brosss said:

I mean that FFTF Dynamic is set to AGL Height Scenario, AGL range feet - 0 - 10000, FFTF range 0.01 - 0.1. P3D v5 is internally blocked at 120 fps. Till today that setting was best for my setup - 40 - 50 fps on ground. Now i have 25 - 30 fps - it seems like FFTF Dynamic stays on 0.33 value. 

Try to start it as Admin.

If you have already done that I would un- and reinstall it.

You can test it :

0-1000

0.01 - 0.7 ( to drag the framerate down )

Unlimited in P3D

Do not run FTFF Dynamic. Slew your ac up to 1000 in a very detailed area that normally takes your franerate down. Watch your framerate.

Now start up FFTF Dynamic. Watch your framerate. It should be lower than before as the 0.01 now is 0.7.

If you are seeing the same framerate than in- and reinstall it.

Btw : 0 - 5000 / 0.01 - 0.33 is what I use with AGL

Edited December 21, 2020 by GSalden

[fluffyflops 1,848]

 

I recently bought a new monitor, so my settings have changed. I now run as below.  

what would you recommend the settings to be with FFTF Dynamic P3Dv5?  I get confused with ff .033 etc etc etc

SIM:   Unlimited Frames   //  vsync off

Ndivia Control Panel :  Frames capped at 35 //   vsync forced on.

Monitor runs at  144 hertz

Many thanks 

Edited March 17, 2021 by fluffyflops

[Afterburner 374]

You know that:

Higher FFTF = lower risk of blurries, faster autogen loading, but lower FPS.
Lower FFTF = higher risk of blurries, slower autogen loading, but higher FPS.

Do you have any problems with the things mentioned above?

[fluffyflops 1,848]

1 hour ago, Afterburner said:

You know that:

Higher FFTF = lower risk of blurries, faster autogen loading, but lower FPS.
Lower FFTF = higher risk of blurries, slower autogen loading, but higher FPS.

Do you have any problems with the things mentioned above?

It's all sorted mate thanks.  Gerald helped out

[simon773 0]

Hi does anyone know it it works with P3DV5.3?

[Ikarus280 93]

And if it is still worth purchasing? 

I have no problems with smoothness in P3D, apart from at night at some airports thanks to badly optimized dynamic lighting.