No Voices with UGCX P3D V4.5

[CPC900 10]

I am running the latest 1.9 UGCX and I hear NO voices.  Every time there should be a voice heard, the P3D sounds go lower for about the time it would take for UGCX to play the voice file, but nothing is heard 😞

Bruce

[CPC900 10]

Ok, I reinstalled the full 1.9 version, but nothing changed.  I hear all the P3D sounds, just not voices in UGCX.  It is set accordingly in the options.  But like I said, for some reason the sounds go lower when the text shows what should be heard; I just hear no voice at all.  It worked flawlessly weeks before.  I just have no idea what changed to cause this to occur?!

The only thing different really, is that I have both P3D V4.5 AND V5 installed.  I don't believe I installed UGCX for V5, but I will check later tonight, in case that could cause any conflict?!

Bruce

[byork 2,259]

Hi Bruce,

4.5 and 5 makes no difference; they're seperate.

What happens when you run the Audio test?

Try updating your audio driver or reverting to an older version.

 

Also this:

Problem: The FO's volume is jumpy.

Solution:
 

1. Go to Control Panel -> Hardware and Sound -> Sound -> Communications.  Select "Do Nothing" when Windows detects communications activity and click apply.

 

---

Problem: When I'm flying with FS2Crew running, if I change to the desktop and then change the task back to FSX/P3D, I lose my FS2Crew sounds.

Solution (Based on Windows 7 / 8 😞

1. Right click on the speaker in the taskbar (lower right near the clock).
2. Go up to "Playback Devices".
3. Right click on the audio device that is in use for your FS2Crew and go to "Properties".
4. Now click on the "Advanced" tab at the top.
5. Now uncheck the two boxes as shown below.

 

 

 

Edited May 17, 2020 by byork

[CPC900 10]

I have done all that, but still no luck.  I hear everything when I use GSX, so I am not sure why UGCX does play voices?!?

And when I run the audio test, all I hear is ambient wind/air conditioning sounds slowly get louder then go back to normal volume, for about 5 seconds.  Am I supposed to hear voices there?! 

Bruce

Edited May 17, 2020 by CPC900

[byork 2,259]

The audio test is an increasing chime sound.

I think I know your problem.

For the UGCX language selection, select English United States, not Canada.

Canada is a known bug that will be fixed in the next update.

Cheers,

 

[CPC900 10]

S, I tried everything and nothing fixes the sound issues??!!  I am not sure where to go from here 😞  I will just keep using GSX fro pushback, until there is some idea on how this can be fixed for me.  I liked UGCX, but that only applies when it works.

 

Bruce

[Manuel82 147]

On 5/17/2020 at 7:16 AM, CPC900 said:

I have done all that, but still no luck.  I hear everything when I use GSX, so I am not sure why UGCX does play voices?!?

Can you go to the UGCX.ini file's content and see what's the setting for the following entries:

• Volume=8
• LanguageID=409
• SoundPack=US

What language did you set in UGCX?

The UGCX.ini is located here:

C:\Users\<Your username>\AppData\Roaming\Ultimate Ground Crew X

 

Manuel

[CPC900 10]

Hmmm....I don't seem to have a "UGCX.ini" file in that directory?!  But, I assume you mean "Ultimate Ground Crew X.INI" 😉

Yes, my settings are set to:

• Volume=10
• LanguageID=409
• SoundPack=US

Bruce

[Manuel82 147]

Try posting your UGCX.LOG file's content, maybe something is failing during initialization

Manuel

[CPC900 10]

------------------------ INITIALIZATING FS MODULE ------------------------
            It's a supported Flight Simulator:        [11]...
            Hooking to the Flight Simulator's MAIN window procedure...
            Registering CUSTOM windows messages...
            Reading the INITIALIZATION file...
            Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths...
            Reading settings from the FSX.CFG or PREPAR3D.CFG file located here:
            C:\Users\BruceW\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg
            The Flight Simulator's frame rate LIMIT is 0 fps...
            Creating our timer...
            Current language ID:    [409]    
            Current sound pack:         US        
            Retrieving UGCX module's version...
            Running UGCX module's version: Version: 1.9.0.0
            Attempting to connect to the Flight Simulator...
            CONNECTED! to Flight Simulator...
            Mapping Flight Simulator's events...
            Setting up data definitions...
            Registering delayed events...
            Initializating scenery reader system...
            Verifying the Flight Simulator's SCENERY configuration...
            Reading the SCENERY.CFG file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\Scenery.cfg  
            Reading the ADD-ONS.CFG file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\add-ons.cfg  
            Reading the ADD-ON.XML file, located in:
            C:\Program Files (x86)\12bPilot\SODE\P3Dv4\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAS\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Prepar3D v4\ORBX\FTX_NA\FTX_AA_KSUN\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam CYVR\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam PHNL\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAX_V2\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KJFK\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Orbx ObjectFlow\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global Airport Pack\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global Buildings HD\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\AU Holgermesh Australia\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global Airport Pack\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global Buildings HD\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global TerraFlora v2\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Orbx ObjectFlow\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global TerraFlora v2\add-on.xml  
            Reading the ADD-ONS.CFG file, located in:
            C:\Users\BruceW\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-ons.cfg  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\A2A\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\utLive\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Flightbeam - KPDX\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Chicago X\add-on.xml  
            Reading the SCENERY_ADD-ONS.XML file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery_add-ons.xml  
            Unloading the scenery index from memory...
            Updating the INITIALIZATION file...
            Creating aircraft's profile FONT...
            Module's initialization sequence COMPLETED!
-------------------------------------------------------------------------------
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...

 

[Manuel82 147]

Ok the log looks good, but I need you to locate the aircraft at a parking spot then request pushback and after that, go to the UGCX.log and paste the contents here, so I can see if when it loads the scenery airport cache there is an issue with the sound mechanism.

Manuel

[CPC900 10]

------------------------ INITIALIZATING FS MODULE ------------------------
            It's a supported Flight Simulator:        [11]...
            Hooking to the Flight Simulator's MAIN window procedure...
            Registering CUSTOM windows messages...
            Reading the INITIALIZATION file...
            Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths...
            Reading settings from the FSX.CFG or PREPAR3D.CFG file located here:
            C:\Users\BruceW\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg
            The Flight Simulator's frame rate LIMIT is 0 fps...
            Creating our timer...
            Current language ID:    [409]    
            Current sound pack:         US        
            Retrieving UGCX module's version...
            Running UGCX module's version: Version: 1.9.0.0
            Attempting to connect to the Flight Simulator...
            CONNECTED! to Flight Simulator...
            Mapping Flight Simulator's events...
            Setting up data definitions...
            Registering delayed events...
            Initializating scenery reader system...
            Verifying the Flight Simulator's SCENERY configuration...
            Reading the SCENERY.CFG file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\Scenery.cfg  
            Reading the ADD-ONS.CFG file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\add-ons.cfg  
            Reading the ADD-ON.XML file, located in:
            C:\Program Files (x86)\12bPilot\SODE\P3Dv4\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAS\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Prepar3D v4\ORBX\FTX_NA\FTX_AA_KSUN\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam CYVR\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam PHNL\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAX_V2\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KJFK\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Orbx ObjectFlow\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global Airport Pack\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global Buildings HD\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\AU Holgermesh Australia\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global Airport Pack\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global Buildings HD\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global TerraFlora v2\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Orbx ObjectFlow\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global TerraFlora v2\add-on.xml  
            Reading the ADD-ONS.CFG file, located in:
            C:\Users\BruceW\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-ons.cfg  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\A2A\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\utLive\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Flightbeam - KPDX\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Chicago X\add-on.xml  
            Reading the SCENERY_ADD-ONS.XML file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery_add-ons.xml  
            Unloading the scenery index from memory...
            Updating the INITIALIZATION file...
            Creating aircraft's profile FONT...
            Module's initialization sequence COMPLETED!
-------------------------------------------------------------------------------
--------------------------- LOCATION CHANGED ---------------------------
--------------------------- LOADED AIRCRAFT INFORMATION ---------------------------
            [K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\B777-300ER.air]
            PMDG model detected: 777
            Aircraft.cfg file path: K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\aircraft.cfg
--------------------------- LOCATION CHANGED ---------------------------
            Aircraft's Model Name: [PMDG 777-333ER CVA2014]
-------------------------------------------------------------------------------
----------------------- UGCX API -----------------------
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK -----------------------
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR -----------------------
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        CYHZ
        Located at the Region's ID:        
        The NEAREST airport's BGL file's path is:
        K:\Prepar3D v4\ORBX\FTX_GLOBAL\FTX_FTXG_AIRPORTS\scenery\ADE_FTX_FTXG_CYHZ.BGL
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [US]...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading process has been COMPLETED!
-------------------------------------------------------------------------------
------------------------ SIMULATION STARTED ------------------------
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION ---------------------------
            [K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\B777-300ER.air]
            PMDG model detected: 777
            Aircraft.cfg file path: K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\aircraft.cfg
            Aircraft's Model Name: [PMDG 777-333ER CVA2014]
-------------------------------------------------------------------------------
        Requested Ground Service: PUSHBACK [or] ENGINE STARTUP SEQUENCE...
        Current airport's ICAO ID: [CYHZ]
        Current airport's BGL file's path:
        K:\Prepar3D v4\ORBX\FTX_GLOBAL\FTX_FTXG_AIRPORTS\scenery\ADE_FTX_FTXG_CYHZ.BGL
        Current Gate's (or parking's) ID: [Gate 3]
        USER's aircraft model name: [PMDG 777-333ER CVA2014]
        USER's aircraft CURRENT location:
            +-> Latitude:        44.88355597  degrees    
            +-> Longitude:        -63.51490832  degrees    
            +-> Altitude:        149.460  meters    
            +-> True Heading:    304.718  degrees    
        Requested aircraft's information to the Flight Simulator...
        The TUG has been CREATED in the simulation.
        A RAMP AGENT has been CREATED in the simulation. It's index number is: [0]
        A RAMP AGENT has been CREATED in the simulation. It's index number is: [1]
        A RAMP AGENT has been CREATED in the simulation. It's index number is: [2]
--------------------------- LOADED AIRCRAFT INFORMATION ---------------------------
            [K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\B777-300ER.air]
            PMDG model detected: 777
            Aircraft.cfg file path: K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\aircraft.cfg
            Aircraft's Model Name: [PMDG 777-333ER CVA2014]
-------------------------------------------------------------------------------
Changing the audio device index...
Updating the INITIALIZATION file...
Selected language's name: [English – United States]
Changing the language ID and sound pack...
Updating the INITIALIZATION file...
        Audio Device or Language or Interface has been CHANGED!
----------------------- UGCX API -----------------------
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK -----------------------
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR -----------------------
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        CYHZ
        Located at the Region's ID:        
        The NEAREST airport's BGL file's path is:
        K:\Prepar3D v4\ORBX\FTX_GLOBAL\FTX_FTXG_AIRPORTS\scenery\ADE_FTX_FTXG_CYHZ.BGL
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [US]...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading process has been COMPLETED!
-------------------------------------------------------------------------------

 

[Manuel82 147]

On 5/16/2020 at 12:17 PM, CPC900 said:

I am running the latest 1.9 UGCX and I hear NO voices.  Every time there should be a voice heard, the P3D sounds go lower for about the time it would take for UGCX to play the voice file, but nothing is heard

This problem also could be related to regional sounds sets being loaded, can you remmember the airport's ID where you didn't hear voices?

Also does this happens on ALL airports you go?...because if it's in some then it could be the regional sounds set initialization file..

21 hours ago, CPC900 said:

Reading the REGIONAL sound packs INITIALIZATION file...

I can tell from this event in the log that the regional sounds are being loaded because of the regional options being checked.

Manuel

Edited May 27, 2020 by Manuel82

[byork 2,259]

As a test, try it at a default airport.  Try it at KGEG.  Load the plane at a parking spot.

 

[CPC900 10]

Tried KGEG, same result :(  I am just angry now that this is not functional.  I appreciate all the help, but I think I will just continue to use GSX2 for everything; it works 100% with no sound issues.  I really want to enjoy BOTH programs, but I am getting too old and tired to waste hours trying to get UGCX to work.  Someday maybe I will try again, unless you see something in the log below?!

Bruce

 

------------------------ INITIALIZATING FS MODULE ------------------------
            It's a supported Flight Simulator:        [11]...
            Hooking to the Flight Simulator's MAIN window procedure...
            Registering CUSTOM windows messages...
            Reading the INITIALIZATION file...
            Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths...
            Reading settings from the FSX.CFG or PREPAR3D.CFG file located here:
            C:\Users\BruceW\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg
            The Flight Simulator's frame rate LIMIT is 0 fps...
            Creating our timer...
            Current language ID:    [409]    
            Current sound pack:         US        
            Retrieving UGCX module's version...
            Running UGCX module's version: Version: 1.9.0.0
            Attempting to connect to the Flight Simulator...
            CONNECTED! to Flight Simulator...
            Mapping Flight Simulator's events...
            Setting up data definitions...
            Registering delayed events...
            Initializating scenery reader system...
            Verifying the Flight Simulator's SCENERY configuration...
            Reading the SCENERY.CFG file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\Scenery.cfg  
            Reading the ADD-ONS.CFG file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\add-ons.cfg  
            Reading the ADD-ON.XML file, located in:
            C:\Program Files (x86)\12bPilot\SODE\P3Dv4\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAS\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Prepar3D v4\ORBX\FTX_NA\FTX_AA_KSUN\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam CYVR\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam PHNL\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAX_V2\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\FsDreamTeam KJFK\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Orbx ObjectFlow\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global Airport Pack\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global Buildings HD\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\AU Holgermesh Australia\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global Airport Pack\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global Buildings HD\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Global TerraFlora v2\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            K:\Orbx Library\p3dv4\Orbx ObjectFlow\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            H:\Orbx Library\p3dv4\Global TerraFlora v2\add-on.xml  
            Reading the ADD-ONS.CFG file, located in:
            C:\Users\BruceW\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-ons.cfg  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\A2A\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\utLive\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Aerosoft DC8\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Flightbeam - KPDX\add-on.xml  
            Reading the ADD-ON.XML file, located in:
            C:\Users\BruceW\Documents\Prepar3D v4 Add-ons\Chicago X\add-on.xml  
            Reading the SCENERY_ADD-ONS.XML file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery_add-ons.xml  
            Unloading the scenery index from memory...
            Updating the INITIALIZATION file...
            Creating aircraft's profile FONT...
            Module's initialization sequence COMPLETED!
-------------------------------------------------------------------------------
--------------------------- LOCATION CHANGED ---------------------------
--------------------------- LOADED AIRCRAFT INFORMATION ---------------------------
            [K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\B777-300ER.air]
            PMDG model detected: 777
            Aircraft.cfg file path: K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\aircraft.cfg
--------------------------- LOCATION CHANGED ---------------------------
            Aircraft's Model Name: [PMDG 777-333ER CVA2014]
-------------------------------------------------------------------------------
----------------------- UGCX API -----------------------
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK -----------------------
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR -----------------------
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        KGEG
        Located at the Region's ID:        
        The NEAREST airport's BGL file's path is:
        K:\Prepar3D v4\ORBX\FTX_NA\FTX_NA_NRM05_SCENERY\scenery\ADE_FTX_NRM_KGEG_Spokane_Intl.BGL
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [US]...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading process has been COMPLETED!
-------------------------------------------------------------------------------
------------------------ SIMULATION STARTED ------------------------
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION ---------------------------
            [K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\B777-300ER.air]
            PMDG model detected: 777
            Aircraft.cfg file path: K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\aircraft.cfg
            Aircraft's Model Name: [PMDG 777-333ER CVA2014]
-------------------------------------------------------------------------------
        Requested Ground Service: PUSHBACK [or] ENGINE STARTUP SEQUENCE...
        Current airport's ICAO ID: [KGEG]
        Current airport's BGL file's path:
        K:\Prepar3D v4\ORBX\FTX_NA\FTX_NA_NRM05_SCENERY\scenery\ADE_FTX_NRM_KGEG_Spokane_Intl.BGL
        Current Gate's (or parking's) ID: [Parking 1]
        USER's aircraft model name: [PMDG 777-333ER CVA2014]
        USER's aircraft CURRENT location:
            +-> Latitude:        47.62859238  degrees    
            +-> Longitude:        -117.52907811  degrees    
            +-> Altitude:        720.351  meters    
            +-> True Heading:    315.460  degrees    
        Requested aircraft's information to the Flight Simulator...
        The TUG has been CREATED in the simulation.
        A RAMP AGENT has been CREATED in the simulation. It's index number is: [0]
        A RAMP AGENT has been CREATED in the simulation. It's index number is: [1]
        A RAMP AGENT has been CREATED in the simulation. It's index number is: [2]
--------------------------- LOADED AIRCRAFT INFORMATION ---------------------------
            [K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\B777-300ER.air]
            PMDG model detected: 777
            Aircraft.cfg file path: K:\Prepar3D v4\SimObjects\Airplanes\PMDG 777-300ER\aircraft.cfg
            Aircraft's Model Name: [PMDG 777-333ER CVA2014]
-------------------------------------------------------------------------------
Changing the audio device index...
Updating the INITIALIZATION file...
----------------------- REALODING AUDIO SYSTEM -----------------------
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Audio Device or Language or Interface has been CHANGED!
----------------------- UGCX API -----------------------
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK -----------------------
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
----------------------- LOADING SCENERY AND GRAMMAR -----------------------
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        KGEG
        Located at the Region's ID:        
        The NEAREST airport's BGL file's path is:
        K:\Prepar3D v4\ORBX\FTX_NA\FTX_NA_NRM05_SCENERY\scenery\ADE_FTX_NRM_KGEG_Spokane_Intl.BGL
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [US]...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        K:\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading process has been COMPLETED!
-------------------------------------------------------------------------------
------------------------ SIMULATION STOPPED ------------------------
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...