Resolved FAIB 737's from AIM AIG - wrong processing of lights

[robschofield 5]

Simbol

Using the PBR models for the FAIB B737's from AIG AIM OCI. The [lights] section looks like this pre-conversion:

 [Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -19.971, -55.145, 4.795, fx_navred
light.1=3, -19.971, 55.145, 4.795, fx_navgre
light.2=2, -20.422, -55.712, 4.857, fx_strobe
light.3=2, -20.422, 55.712, 4.857, fx_strobe
light.4=1, -5.242, 0, -4.21, fx_beacon
light.5=1, 1.10, 0, 9.567, fx_beacon
light.6=3, -26.055, 55.45, 4.850, fx_navwhi
light.7=3, -26.055, -55.45, 4.850, fx_navwhi
light.8=2, -59.945, 0, 7.650, fx_strobe
light.9=6, 6.8, -8.153, 0.06, fx_FAIB_B737NG_taxi
light.10=6, 6.8, 8.153, 0.06, fx_FAIB_B737NG_taxi

Note the two effect based taxi lights which AIG OCI adds. This is what you then get after AIRLP conversion:

[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -20.426, -55.636, 4.833, fx_fsreborn_navred2895
light.1=3, -20.426, 55.636, 4.833, fx_fsreborn_navgre2895
light.2=2, 0, 0, 0, fx_fsreborn_stbg2895
light.3=1, -5.242, 0, -4.21, fx_fsreborn_beacon2895
light.4=1, 1.1, 0, 9.567, fx_fsreborn_beacon2895
light.5=3, -26.65, 56.425, 4.85, fx_fsreborn_navwhi2895
light.6=3, -26.65, -56.425, 4.85, fx_fsreborn_navwhi2895
light.7=4, 6.8, -8.153, 0.06, fx_FAIB_B737NG_taxi
light.8=4, 6.8, 8.153, 0.06, fx_FAIB_B737NG_taxi
light.9=4, 6.8, -8.153, 0.06, fx_FAIB_B737NG_taxi
light.10=4, 6.8, 8.153, 0.06, fx_FAIB_B737NG_taxi

It creates duplicate entries and converts them from taxi lights (type 6) to cockpit lights (type 4).

Any idea why as obviously has impact on display of the taxi light in the sim. While I can amend manually, have to do it every time I run AIRLP.

Best regards

 

Rob

 

[Kaiii3 1,978]

can confirm this report on my system as well

[simbol 5,819]

Ok I will look into it, thanks for the report.

S.

[SN737 140]

12 hours ago, robschofield said:

Simbol

Using the PBR models for the FAIB B737's from AIG AIM OCI. The [lights] section looks like this pre-conversion:

 [Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -19.971, -55.145, 4.795, fx_navred
light.1=3, -19.971, 55.145, 4.795, fx_navgre
light.2=2, -20.422, -55.712, 4.857, fx_strobe
light.3=2, -20.422, 55.712, 4.857, fx_strobe
light.4=1, -5.242, 0, -4.21, fx_beacon
light.5=1, 1.10, 0, 9.567, fx_beacon
light.6=3, -26.055, 55.45, 4.850, fx_navwhi
light.7=3, -26.055, -55.45, 4.850, fx_navwhi
light.8=2, -59.945, 0, 7.650, fx_strobe
light.9=6, 6.8, -8.153, 0.06, fx_FAIB_B737NG_taxi
light.10=6, 6.8, 8.153, 0.06, fx_FAIB_B737NG_taxi

Note the two effect based taxi lights which AIG OCI adds. This is what you then get after AIRLP conversion:

[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -20.426, -55.636, 4.833, fx_fsreborn_navred2895
light.1=3, -20.426, 55.636, 4.833, fx_fsreborn_navgre2895
light.2=2, 0, 0, 0, fx_fsreborn_stbg2895
light.3=1, -5.242, 0, -4.21, fx_fsreborn_beacon2895
light.4=1, 1.1, 0, 9.567, fx_fsreborn_beacon2895
light.5=3, -26.65, 56.425, 4.85, fx_fsreborn_navwhi2895
light.6=3, -26.65, -56.425, 4.85, fx_fsreborn_navwhi2895
light.7=4, 6.8, -8.153, 0.06, fx_FAIB_B737NG_taxi
light.8=4, 6.8, 8.153, 0.06, fx_FAIB_B737NG_taxi
light.9=4, 6.8, -8.153, 0.06, fx_FAIB_B737NG_taxi
light.10=4, 6.8, 8.153, 0.06, fx_FAIB_B737NG_taxi

It creates duplicate entries and converts them from taxi lights (type 6) to cockpit lights (type 4).

Any idea why as obviously has impact on display of the taxi light in the sim. While I can amend manually, have to do it every time I run AIRLP.

Best regards

 

Rob

This happens to me too, also with 767 and 747 FAIB's (fx_FAIB_B737NG_taxi, fx_FAIB_B747_taxi or fx_FAIB_B767_taxi) addtional taxi lights added by AIG OCI

 

[simbol 5,819]

**UPDATE**

This is now fixed and will be pushed on the next update.

Regards,

S.

[SN737 140]

4 hours ago, simbol said:

**UPDATE**

This is now fixed and will be pushed on the next update.

Regards,

S.

Thank you Raul😃

[AnkH 2,264]

Was this update ever released? I am still on 1.20.8

[simbol 5,819]

19 hours ago, AnkH said:

Was this update ever released? I am still on 1.20.8

Yes 1.20.8 has this fix.

S.