Jump to content

Sign in to follow this  
fs1

New ATC and Airport Operations Application Testing

Recommended Posts

Hi:

1- When you say trying to takeoff you mean at the runway holding point?

2- In my tests if no plane is at the runway holding point and a plane is cleared to land and a prop plane just landed at 70/80 kts. and the taxiway is far away, the cleared to land plane must go around, I´m doing my tests at MMGL landing at RWY 28.

Thanks for your time and help

Regards

Tony RD

AIG Conversion Team

 

Share this post


Link to post

In 1) an AI must be rolling and prepared for taking off, that is where runway speed for the AI which landed should kick in.

Regarding 2) can you explain? I am not getting the issue.

Thanks


Federico Sucari

Share this post


Link to post

Sorry Federico my spanglish is not good.

What I mean is the prop plane that lands at 70/80 kts and the taxiway is far, must taxi on the runway and take some time to reach the taxiway, in the mean time if a 747 is cleared to land at 150 kts, the 747 will travel so fast before the prop plane exit the runway.

I told you about MMGL (Guadalajara, Mexico Airport Rwy 28) as an example to see how far is the first taxiway. You also can see the taxiways at MMEP (Tepic Airport) or MMAS (Aguascalientes Airport) . Almost all airports in Mexico has that kind of taxiways layouts.

Hope this make sense, if not dont hesitate to tell me.

Thanks for your quick response

Tony RD

AIG Conversion Team

Share this post


Link to post

Thanks @peluso5

I will PM you to understand what’s going on.

 


Federico Sucari

Share this post


Link to post

Does anyone else get a black screen right after the splash screen with the new version?

I deleted the old folder and installed the new one and now I can't get to the opening screen in P3d (v4.5). When removing the folder, I'm able to open P3D normally again. Looks like the old version of the app works too.

Any suggestions? 

Share this post


Link to post
12 minutes ago, DChockey08 said:

Does anyone else get a black screen right after the splash screen with the new version?

I deleted the old folder and installed the new one and now I can't get to the opening screen in P3d (v4.5). When removing the folder, I'm able to open P3D normally again. Looks like the old version of the app works too.

Any suggestions? 

are you having the originals DLL in place? If not, replace your original DLLs

if you have original DLLs, this must be an exception maybe going on. Can you add this line to the XML file <Debug>1</Debug> and run P3D and the addon? There will be txt logs in the DLL's folder. If you can zip all txt files and send them to me at fsprgrs at gmail com

I will be standing by. Thanks

Edited by fs1

Federico Sucari

Share this post


Link to post

DChockey08:

Does your add-on.xml is pointing to the path where you have installed the ATCAPI.dll?

Tony RD

AIG Conversion Team

Share this post


Link to post

@fs1 sent! 

@peluso5 yes. I replaced the whole file so it's in the same spot as before. When I changed it back to the old version, P3D loaded up normally again. 

 

Share this post


Link to post

can you send me your ai_player.dll? Thanks


Federico Sucari

Share this post


Link to post

Having trouble sending it over gmail but you just gave me an idea! 

A year ago i did modify taxi speeds using that editor that is out there on AVSIM. So that would have edited in the ai player. 

Let me try reverting that to default. 

Share this post


Link to post
3 minutes ago, DChockey08 said:

Having trouble sending it over gmail but you just gave me an idea! 

A year ago i did modify taxi speeds using that editor that is out there on AVSIM. So that would have edited in the ai player. 

Let me try reverting that to default. 

Thanks! Correct, ATCAPI does not work as you have the speed patch. Run the Client Installer and will fix it. Thanks


Federico Sucari

Share this post


Link to post
3 minutes ago, fs1 said:

Thanks! Correct, ATCAPI does not work as you have the speed patch. Run the Client Installer and will fix it. Thanks

Yep. Thankfully had backed-up the original ai_player and restored it and am now up and running. 

THANK YOU!!! 

  • Upvote 1

Share this post


Link to post

I had P3Dv4.5 HF2 CTD at 100% loading at a number of airports in South Germamy/East Switzerland this weekend. After having spent a day isolating scenery and traffic files, moving back to ATCAPI 1.0.3 from 1.0.4 fixed it. 1.0.4 would also work if i removed all traffic files from the active directories.

Just in case this helps with Testing/debugging.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    48%
    $12,200.00 of $25,000.00 Donate Now
×
×
  • Create New...