Jump to content
Sign in to follow this  
Pluto7777

Thrustmaster Airbus new set

Recommended Posts

Last week arrived my Airbus Thrustmaster set of joystick and throttles. I can see lots of posts (issues) spread over the different forums, but can anyone lead me to a good (actual) setup for using these sets with P3Dv4 for FSLabs (and/or Aerosoft) busses ? A good FSUIPC setup somewhere to find ?

Edited by Pluto7777

Share this post


Link to post

Aerosoft has a special setting for the throttles, that must be enabled in each configurator (one for the A318/A319, one for the A320/A321 and I guess one for the A333). I understand it takes care of everything. I'm pretty sure FSLabs has something similar. For the stick, well, I don´t know.

Edited by Luis Hernandez

Best regards,
Luis Hernández 20px-Flag_of_Colombia.svg.png20px-Flag_of_Argentina.svg.png

Main rig: self built, AMD Ryzen 5 5600X with PBO enabled (but default settings, CO -15 mV, and SMT ON), 2x16 GB DDR4-3200 RAM, Nvidia RTX3060 Ti 8GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), Viewsonic VX2458-MHD 1920x1080@23-144 Hz (locked at 120 Hz, FreeSync ON), Windows 10 Pro. Runing FSX-SE, MSFS and P3D v5.4.

Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there... sometimes on just battery! FSX-SE also installed, just in case. 

VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/travel.

Share this post


Link to post

im still waiting for amazon to have the throttles.... nearly a month now...


 
 
 
 
14ppkc-6.png
  913456

Share this post


Link to post
2 hours ago, Pluto7777 said:

Throttles are here, fluffyflops, yours also ?   did you install them ?

yes I have them working flawlessly with the fsl and aerosoft yes. But i had to use a paid version of fsuipc to it 


 
 
 
 
14ppkc-6.png
  913456

Share this post


Link to post
4 hours ago, fluffyflops said:

yes I have them working flawlessly with the fsl and aerosoft yes. But i had to use a paid version of fsuipc to it 

Could you kindly share the FSUIPC settings for your throttle and the AS Airbus, please?

I've gotten into a muddle with FSUIPC and the TCA throttle. The AS provided .ini file settings don't recognise the detent ranges either.


AMD Ryzen 5800X3D; MSI RTX 3080 Ti VENTUS 3X; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440 x 1440)
Fulcrum One yoke; Thrustmaster TCA Captain Pack Airbus edition; MFG Crosswind rudder pedals; CPFlight MCP 737; Logitech FIP x3; TrackIR

MSFS; Fenix A320; A2A PA-24; HPG H145; PMDG 737-600; AIG; RealTraffic; PSXTraffic; FSiPanel; REX AccuSeason Adv; FSDT GSX Pro; FS2Crew RAAS Pro; FS-ATC Chatter

Share this post


Link to post

Yes, mine is still unboxed, i dare not to change my actual settings before someone can convince me that they are doing OK with reversers and engine switches included !  So yes; very interested to read your settings...

 

Share this post


Link to post
8 hours ago, F737NG said:

Could you kindly share the FSUIPC settings for your throttle and the AS Airbus, please?

I've gotten into a muddle with FSUIPC and the TCA throttle. The AS provided .ini file settings don't recognise the detent ranges either.

I'll type something up this afternoon. 

Where are is aerosoft. Ini file settings? 

Cheers 


 
 
 
 
14ppkc-6.png
  913456

Share this post


Link to post
2 hours ago, fluffyflops said:

I'll type something up this afternoon. 

Where are is aerosoft. Ini file settings?


That would be great.

File is called AB_ND_GDI.ini, located in xxxxxx\aerosoft\Aerosoft A318-A319 Pro V5\Data\

 

I've previously tried the Airbus Configurator method: https://forum.aerosoft.com/index.php?/topic/159296-how-to-use-the-tca-throttle-the-reverse-levers-and-starter-buttons-with-aerosoft-aibusses-under-p3dv4v5/
and manipulating the AB_ND_GDI.ini method: https://forum.aerosoft.com/index.php?/topic/156444-tca-support-for-the-aerosoft-busses-and-update-schedule/&do=findComment&comment=1009807

Neither method works properly for me, despite fully updating to the latest Airbus version, following the steps exactly as described and rolling back to default settings before trying the other method.


AMD Ryzen 5800X3D; MSI RTX 3080 Ti VENTUS 3X; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440 x 1440)
Fulcrum One yoke; Thrustmaster TCA Captain Pack Airbus edition; MFG Crosswind rudder pedals; CPFlight MCP 737; Logitech FIP x3; TrackIR

MSFS; Fenix A320; A2A PA-24; HPG H145; PMDG 737-600; AIG; RealTraffic; PSXTraffic; FSiPanel; REX AccuSeason Adv; FSDT GSX Pro; FS2Crew RAAS Pro; FS-ATC Chatter

Share this post


Link to post
4 minutes ago, F737NG said:


That would be great.

File is called AB_ND_GDI.ini, located in xxxxxx\aerosoft\Aerosoft A318-A319 Pro V5\Data\

 

I've previously tried the Airbus Configurator method: https://forum.aerosoft.com/index.php?/topic/159296-how-to-use-the-tca-throttle-the-reverse-levers-and-starter-buttons-with-aerosoft-aibusses-under-p3dv4v5/
and manipulating the AB_ND_GDI.ini method: https://forum.aerosoft.com/index.php?/topic/156444-tca-support-for-the-aerosoft-busses-and-update-schedule/&do=findComment&comment=1009807

Neither method works properly for me, despite fully updating to the latest Airbus version, following the steps exactly as described and rolling back to default settings before trying the other method.

ok this is what I have.

can you paste your fsuipc section with the following entries 

 

JOYNAMES  

 

mine is as below  as you can see my throttle  is down as  0 

[JoyNames]
AutoAssignLetters=No
1=T.A320 Pilot
1.GUID={9EE4CF10-33B3-11EB-8009-444553540000}
2=MFG Crosswind V2
2.GUID={9EE36F80-33B3-11EB-8005-444553540000}
0=TCA Q-Eng 1&2
0.GUID={A2A36D30-4076-11EB-8001-444553540000}

 

then look at your fslabs profile, as you can see  0 is set to -{ TO SIM: THROTTLE_SET }-

whereas the other options are set as direct to fsuipc     -{ DIRECT: Aileron }-

 

 

[Profile.fslabs]
1=FSLabs A320X CFM - Aeroflot Russian Airlines VQ-BKS
2=FSLabs A320X CFM - easyJet Europe OE-ICF
 

[Axes.fslabs]
RangeRepeatRate=10
0=0Y,256,F,0,0,0,65697    -{ TO SIM: THROTTLE_SET }-
1=1X,256,D,0,0,0,1    -{ DIRECT: Aileron }-
2=1Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
3=2X,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
4=2Y,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
5=2R,256,D,0,0,0,3    -{ DIRECT: Rudder }-
 

for everything else for example the 330 is as below  everything is set as direct to fsuipc

[Profile.787]
1=QualityWings 787-9 RR Virgin Atlantic Airways G-VNYL -SATCOM
2=QualityWings 787-9 RR Virgin Atlantic Airways G-VSPY -SATCOM
3=Boeing B787-9 Air Canada C-FGDT -SATCOM
4=Aerosoft A333 professional KLM PH-AKA

[Axes.787]
RangeRepeatRate=10
0=0X,256,D,0,0,0,4    -{ DIRECT: Throttle }-
1=1X,256,D,0,1,0,0    -{ DIRECT: Aileron }-
2=1Y,256,D,0,0,0,2    -{ DIRECT: Elevator }-
3=1S,256,D,0,0,0,4    -{ DIRECT: Throttle }-   this i need to take out as its the throttle on the joystick 
4=2X,256,D,0,0,0,7    -{ DIRECT: LeftBrake }-
5=2Y,256,D,0,0,0,8    -{ DIRECT: RightBrake }-
6=2R,256,D,0,0,0,3    -{ DIRECT: Rudder }-

and finally the buttons are like this 

 

[Buttons]
PollInterval=25
ButtonRepeat=20,10
0=P0,7,C66587,78253     -{ROTOR_BRAKE}-
1=U0,7,C66587,78252     -{ROTOR_BRAKE}-
2=P0,6,C66587,78252     -{ROTOR_BRAKE}-
3=U0,6,C66587,78253     -{ROTOR_BRAKE}-
4=P0,3,C66587,78248     -{ROTOR_BRAKE}-
5=P0,3,C66587,78247     -{ROTOR_BRAKE}-
6=U0,3,C66587,78247     -{ROTOR_BRAKE}-
7=U0,3,C66587,78250     -{ROTOR_BRAKE}-
8=P0,2,C66587,78243     -{ROTOR_BRAKE}-
9=P0,2,C66587,78242     -{ROTOR_BRAKE}-
10=U0,2,C66587,78242     -{ROTOR_BRAKE}-
11=U0,2,C66587,78245     -{ROTOR_BRAKE}-
12=P1,3,K90,8     -{Key press: Z}-

 

my idents as below 

 

Capture.png


 
 
 
 
14ppkc-6.png
  913456

Share this post


Link to post
6 hours ago, Pluto7777 said:

Super Thx ! i ll try it asap

....

no problem.  the thing to remember

fslabs -                        set in fsupic as  "direct to sim"

everything else -         set in fsuipc as "direct to fsuipc"

 

thanks how i got it workiing anyhows.

good luck.  you dont be the first person to struggle with this.

 

Edited by fluffyflops

 
 
 
 
14ppkc-6.png
  913456

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...