Jump to content

Sign in to follow this  
Pluto7777

Thrustmaster Airbus new set

Recommended Posts

Last week arrived my Airbus Thrustmaster set of joystick and throttles. I can see lots of posts (issues) spread over the different forums, but can anyone lead me to a good (actual) setup for using these sets with P3Dv4 for FSLabs (and/or Aerosoft) busses ? A good FSUIPC setup somewhere to find ?

Edited by Pluto7777

Share this post


Link to post

Aerosoft has a special setting for the throttles, that must be enabled in each configurator (one for the A318/A319, one for the A320/A321 and I guess one for the A333). I understand it takes care of everything. I'm pretty sure FSLabs has something similar. For the stick, well, I don´t know.

Edited by Luis Hernandez

Best regards,
Luis Hernández 20px-Flag_of_Colombia.svg.png20px-Flag_of_Argentina.svg.png

My rig: ASUS TUF FX504GD (Intel i5 8300H @ 2.3-4.0 GHz, 8 GB DDR4-2666 RAM, Nvidia GTX 1050 2 GB, 256 GB M.2 SSD+256 GB 1 TB SATA III SSD as storage, Windows 10 Home)

Saitek X-52 as primary controller. Xbox 360 wired and eDimensional G-Pad Pro wired controllers as standby/travel.

Finally moved to P3D4.5. Also running FSX-SE, FS9 and XP11 Vulkan. Tried MSFS2020, but my rig isn't up to the task. What do I do with 4 sims now?

Share this post


Link to post

im still waiting for amazon to have the throttles.... nearly a month now...


 
 
 
 
v63vq9-5.png

Share this post


Link to post
2 hours ago, Pluto7777 said:

Throttles are here, fluffyflops, yours also ?   did you install them ?

yes I have them working flawlessly with the fsl and aerosoft yes. But i had to use a paid version of fsuipc to it 


 
 
 
 
v63vq9-5.png

Share this post


Link to post
4 hours ago, fluffyflops said:

yes I have them working flawlessly with the fsl and aerosoft yes. But i had to use a paid version of fsuipc to it 

Could you kindly share the FSUIPC settings for your throttle and the AS Airbus, please?

I've gotten into a muddle with FSUIPC and the TCA throttle. The AS provided .ini file settings don't recognise the detent ranges either.


Ryzen 3700X 4.4GHz(PBO); ASUS GTX 1070 O8G; Gigabyte AB350 Gaming-3; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440x1440)
Fulcrum Sim yoke; Thrustmaster TCA Sidestick and Throttle Airbus edition; MFG Crosswind rudder pedals; CP Flight MCP 737; Logitech FIP x2; TrackIR

P3Dv5.1 + FS Global Ultimate NG + ORBX + MSE + ActiveSky + ChasePlane + AILRP + FS-ATC Chatter + FFTF Dynamic + Self Loading Cargo + WIN 10 Pro
PMDG 737 777; QW 787; AS A320 A330; MJC Dash 8; A2A C172 PA-28; Carenado A42 A72 XL560; FT E-Jets v3; QW 757; JF C152

Share this post


Link to post

Yes, mine is still unboxed, i dare not to change my actual settings before someone can convince me that they are doing OK with reversers and engine switches included !  So yes; very interested to read your settings...

 

Share this post


Link to post
8 hours ago, F737NG said:

Could you kindly share the FSUIPC settings for your throttle and the AS Airbus, please?

I've gotten into a muddle with FSUIPC and the TCA throttle. The AS provided .ini file settings don't recognise the detent ranges either.

I'll type something up this afternoon. 

Where are is aerosoft. Ini file settings? 

Cheers 


 
 
 
 
v63vq9-5.png

Share this post


Link to post
2 hours ago, fluffyflops said:

I'll type something up this afternoon. 

Where are is aerosoft. Ini file settings?


That would be great.

File is called AB_ND_GDI.ini, located in xxxxxx\aerosoft\Aerosoft A318-A319 Pro V5\Data\

 

I've previously tried the Airbus Configurator method: https://forum.aerosoft.com/index.php?/topic/159296-how-to-use-the-tca-throttle-the-reverse-levers-and-starter-buttons-with-aerosoft-aibusses-under-p3dv4v5/
and manipulating the AB_ND_GDI.ini method: https://forum.aerosoft.com/index.php?/topic/156444-tca-support-for-the-aerosoft-busses-and-update-schedule/&do=findComment&comment=1009807

Neither method works properly for me, despite fully updating to the latest Airbus version, following the steps exactly as described and rolling back to default settings before trying the other method.


Ryzen 3700X 4.4GHz(PBO); ASUS GTX 1070 O8G; Gigabyte AB350 Gaming-3; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440x1440)
Fulcrum Sim yoke; Thrustmaster TCA Sidestick and Throttle Airbus edition; MFG Crosswind rudder pedals; CP Flight MCP 737; Logitech FIP x2; TrackIR

P3Dv5.1 + FS Global Ultimate NG + ORBX + MSE + ActiveSky + ChasePlane + AILRP + FS-ATC Chatter + FFTF Dynamic + Self Loading Cargo + WIN 10 Pro
PMDG 737 777; QW 787; AS A320 A330; MJC Dash 8; A2A C172 PA-28; Carenado A42 A72 XL560; FT E-Jets v3; QW 757; JF C152

Share this post


Link to post
4 minutes ago, F737NG said:


That would be great.

File is called AB_ND_GDI.ini, located in xxxxxx\aerosoft\Aerosoft A318-A319 Pro V5\Data\

 

I've previously tried the Airbus Configurator method: https://forum.aerosoft.com/index.php?/topic/159296-how-to-use-the-tca-throttle-the-reverse-levers-and-starter-buttons-with-aerosoft-aibusses-under-p3dv4v5/
and manipulating the AB_ND_GDI.ini method: https://forum.aerosoft.com/index.php?/topic/156444-tca-support-for-the-aerosoft-busses-and-update-schedule/&do=findComment&comment=1009807

Neither method works properly for me, despite fully updating to the latest Airbus version, following the steps exactly as described and rolling back to default settings before trying the other method.

ok this is what I have.

can you paste your fsuipc section with the following entries 

 

JOYNAMES  

 

mine is as below  as you can see my throttle  is down as  0 

[JoyNames]
AutoAssignLetters=No
1=T.A320 Pilot
1.GUID={9EE4CF10-33B3-11EB-8009-444553540000}
2=MFG Crosswind V2
2.GUID={9EE36F80-33B3-11EB-8005-444553540000}
0=TCA Q-Eng 1&2
0.GUID={A2A36D30-4076-11EB-8001-444553540000}

 

then look at your fslabs profile, as you can see  0 is set to -{ TO SIM: THROTTLE_SET }-

whereas the other options are set as direct to fsuipc     -{ DIRECT: Aileron }-

 

 

[Profile.fslabs]
1=FSLabs A320X CFM - Aeroflot Russian Airlines VQ-BKS
2=FSLabs A320X CFM - easyJet Europe OE-ICF
 

[Axes.fslabs]
RangeRepeatRate=10
0=0Y,256,F,0,0,0,65697    -{ TO SIM: THROTTLE_SET }-
1=1X,256,D,0,0,0,1    -{ DIRECT: Aileron }-
2=1Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
3=2X,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
4=2Y,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
5=2R,256,D,0,0,0,3    -{ DIRECT: Rudder }-
 

for everything else for example the 330 is as below  everything is set as direct to fsuipc

[Profile.787]
1=QualityWings 787-9 RR Virgin Atlantic Airways G-VNYL -SATCOM
2=QualityWings 787-9 RR Virgin Atlantic Airways G-VSPY -SATCOM
3=Boeing B787-9 Air Canada C-FGDT -SATCOM
4=Aerosoft A333 professional KLM PH-AKA

[Axes.787]
RangeRepeatRate=10
0=0X,256,D,0,0,0,4    -{ DIRECT: Throttle }-
1=1X,256,D,0,1,0,0    -{ DIRECT: Aileron }-
2=1Y,256,D,0,0,0,2    -{ DIRECT: Elevator }-
3=1S,256,D,0,0,0,4    -{ DIRECT: Throttle }-   this i need to take out as its the throttle on the joystick 
4=2X,256,D,0,0,0,7    -{ DIRECT: LeftBrake }-
5=2Y,256,D,0,0,0,8    -{ DIRECT: RightBrake }-
6=2R,256,D,0,0,0,3    -{ DIRECT: Rudder }-

and finally the buttons are like this 

 

[Buttons]
PollInterval=25
ButtonRepeat=20,10
0=P0,7,C66587,78253     -{ROTOR_BRAKE}-
1=U0,7,C66587,78252     -{ROTOR_BRAKE}-
2=P0,6,C66587,78252     -{ROTOR_BRAKE}-
3=U0,6,C66587,78253     -{ROTOR_BRAKE}-
4=P0,3,C66587,78248     -{ROTOR_BRAKE}-
5=P0,3,C66587,78247     -{ROTOR_BRAKE}-
6=U0,3,C66587,78247     -{ROTOR_BRAKE}-
7=U0,3,C66587,78250     -{ROTOR_BRAKE}-
8=P0,2,C66587,78243     -{ROTOR_BRAKE}-
9=P0,2,C66587,78242     -{ROTOR_BRAKE}-
10=U0,2,C66587,78242     -{ROTOR_BRAKE}-
11=U0,2,C66587,78245     -{ROTOR_BRAKE}-
12=P1,3,K90,8     -{Key press: Z}-

 

my idents as below 

 

Capture.png


 
 
 
 
v63vq9-5.png

Share this post


Link to post
6 hours ago, Pluto7777 said:

Super Thx ! i ll try it asap

....

no problem.  the thing to remember

fslabs -                        set in fsupic as  "direct to sim"

everything else -         set in fsuipc as "direct to fsuipc"

 

thanks how i got it workiing anyhows.

good luck.  you dont be the first person to struggle with this.

 

Edited by fluffyflops

 
 
 
 
v63vq9-5.png

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    45%
    $11,475.00 of $25,000.00 Donate Now
×
×
  • Create New...