Jump to content
Sign in to follow this  
carlito777

Aerosoft CRJ released

Recommended Posts

3 hours ago, JRBarrett said:

Custom views are easy in MSFS. You first set a specific view to your preference using the keyboard arrow keys to move left/right/up/down, or ALT + up/down. You can also pan and tilt.
 

Once the view is the way you want it, press CTL + ALT + a top row number key from 1 through 9. You can recall the view by pressing ALT + the number key.

These custom views are associated with the aircraft model, so you can have one set of custom views for the CRJ and a completely different set for the TBM or 172 etc.

I did the same, but for recall I found it very cumbersome to press ALT+1...ALT+ 0 etc. So I went into that section for the cockpit cameras and changed the “Load Custom Camera” ALT + number assignments to just the keypad number and then I just need to press the appropriate number on the keypad. I think it’s easier than doing the the two key combo press, easy to look around too during critical phases of the flight.

  • Like 3

i913900KF (5.8GHz) | Case: Fractal PopAir RGB I MSI Z790-VC | MSI Gaming RTX 4070Ti Super 16GB | Kingston Fury Beast 32GB DDR5 | SOLIDIGM P41 Plus 2TB NVMe M.2 SSD | Samsung SSD 870 EVO 2TB | Thermalright Frozen Notte 240 MM Liquid Cooling | Samsung 41" Monitor 1920 x 1080 60Hz | Honeycomb Alpha & Bravo | Logitech G Pro pedals | Tobii EyeTracker

Share this post


Link to post
Share on other sites
12 hours ago, TomCYYZ said:

I did the same, but for recall I found it very cumbersome to press ALT+1...ALT+ 0 etc. So I went into that section for the cockpit cameras and changed the “Load Custom Camera” ALT + number assignments to just the keypad number and then I just need to press the appropriate number on the keypad. I think it’s easier than doing the the two key combo press, easy to look around too during critical phases of the flight.

Thanks for the tip, I’ll try that. I would prefer to use the numeric keypad as I do in X-Plane.

Edited by JRBarrett

Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites
16 hours ago, JRBarrett said:

Custom views are easy in MSFS. You first set a specific view to your preference using the keyboard arrow keys to move left/right/up/down, or ALT + up/down. You can also pan and tilt.
 

Once the view is the way you want it, press CTL + ALT + a top row number key from 1 through 9. You can recall the view by pressing ALT + the number key.

These custom views are associated with the aircraft model, so you can have one set of custom views for the CRJ and a completely different set for the TBM or 172 etc.

Are all custom cockpit views tied to the aircraft.  I had previously set up really nice interior views tied to a separate USB numberpad but now none work in the CRJ.  Second question, is there a way to set these up using CTL+ATL+NUM but recall them just with the numberpad rather than having to also press ATL + ?


Mark W   CYYZ      

My Simhttps://goo.gl/photos/oic45LSoaHKEgU8E9

My Concorde Tutorial Videos available here:  https://www.youtube.com/user/UPS1000
 

 

Share this post


Link to post
Share on other sites
1 hour ago, MarkW said:

Are all custom cockpit views tied to the aircraft.  I had previously set up really nice interior views tied to a separate USB numberpad but now none work in the CRJ.  Second question, is there a way to set these up using CTL+ATL+NUM but recall them just with the numberpad rather than having to also press ATL + ?

One way to avoid having to use two hands to send keypad combinations is to use something like Touch Portal (TP). With TP you can set up single buttons on a tablet which when pressed, send whatever combination of keystroke characters you need to the sim. There is a free version that allows setting up a limited number of buttons, but the Pro version is relatively inexpensive, about $13 or so as I recall, and supports hundreds of buttons if needed. A nice feature is you can label the TP buttons with what they do so you don't have to remember what button does what. And TP is actually quite powerful, e.g., it supports conditional logic programming of buttons if needed, etc.

https://www.avsim.com/forums/topic/589200-best-use-of-a-tablet-ever/

https://www.touch-portal.com/

Al

 

Edited by ark

Share this post


Link to post
Share on other sites
56 minutes ago, MarkW said:

Are all custom cockpit views tied to the aircraft.  I had previously set up really nice interior views tied to a separate USB numberpad but now none work in the CRJ.  Second question, is there a way to set these up using CTL+ATL+NUM but recall them just with the numberpad rather than having to also press ATL + ?

I had to rework my custom views on the numberpad....I am guessing it is tied to aircraft models.  You can do it for the 700 and then and then copy the Camera.cfg to the 550 so you don't have to repeat the process.


Eric

i9-12900k, RTX 3080ti FTW, 32GB ddr5 5600 RAM, 2TB 980 Pro SSD, H100i AIO, Samsung CRG90 49", Win 11

Share this post


Link to post
Share on other sites
20 minutes ago, Flic1 said:

I had to rework my custom views on the numberpad....I am guessing it is tied to aircraft models.  You can do it for the 700 and then and then copy the Camera.cfg to the 550 so you don't have to repeat the process.

Exactly, I copy any one of my cameras into whatever aircraft I want and then adjust the view and rebind them to the numpad.

Edited by TomCYYZ

i913900KF (5.8GHz) | Case: Fractal PopAir RGB I MSI Z790-VC | MSI Gaming RTX 4070Ti Super 16GB | Kingston Fury Beast 32GB DDR5 | SOLIDIGM P41 Plus 2TB NVMe M.2 SSD | Samsung SSD 870 EVO 2TB | Thermalright Frozen Notte 240 MM Liquid Cooling | Samsung 41" Monitor 1920 x 1080 60Hz | Honeycomb Alpha & Bravo | Logitech G Pro pedals | Tobii EyeTracker

Share this post


Link to post
Share on other sites
14 hours ago, TomCYYZ said:

I did the same, but for recall I found it very cumbersome to press ALT+1...ALT+ 0 etc. So I went into that section for the cockpit cameras and changed the “Load Custom Camera” ALT + number assignments to just the keypad number and then I just need to press the appropriate number on the keypad. I think it’s easier than doing the the two key combo press, easy to look around too during critical phases of the flight.

 Agree ALT +1 etc is cumbersome,  but there's a next and previous view option for these commands which just rotates through each forward or backwards. I've set this up in on a pair of buttons on my stick.


13900K@5.8GHz - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR  HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)

Share this post


Link to post
Share on other sites
2 minutes ago, odourboy said:

 Agree ALT +1 etc is cumbersome,  but there's a next and previous view option for these commands which just rotates through each forward or backwards. I've set this up in on a pair of buttons on my stick.

That is a handy option as well to use in conjunction with the single numpad views. Thanks.


i913900KF (5.8GHz) | Case: Fractal PopAir RGB I MSI Z790-VC | MSI Gaming RTX 4070Ti Super 16GB | Kingston Fury Beast 32GB DDR5 | SOLIDIGM P41 Plus 2TB NVMe M.2 SSD | Samsung SSD 870 EVO 2TB | Thermalright Frozen Notte 240 MM Liquid Cooling | Samsung 41" Monitor 1920 x 1080 60Hz | Honeycomb Alpha & Bravo | Logitech G Pro pedals | Tobii EyeTracker

Share this post


Link to post
Share on other sites

If you want to change the shortcut to numpad, do you change this in the cameras.cfg or in the options menu? 


Hans

Share this post


Link to post
Share on other sites
2 hours ago, MarkW said:

Are all custom cockpit views tied to the aircraft.  I had previously set up really nice interior views tied to a separate USB numberpad but now none work in the CRJ.  Second question, is there a way to set these up using CTL+ATL+NUM but recall them just with the numberpad rather than having to also press ATL + ?

See the post right above yours regarding use of the num pad. Apparently it is possible. Custom views are linked to the aircraft model you created them for.


Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites

Had to share my great experience flying the CRJ this morning.  I was on short final to YHZ runway 23 after a smooth flight with mostly clear skies so I could watch the scenery go by, beautiful sunny day as it is IRL here today and I noticed another CRJ holding short for me.  I thought “uh oh, I have an audience, don’t screw up the landing!” and I proceeded to grease it, my fifth landing and best one so far.  🙂

On the off chance that the person piloting that CRJ is on the form, thanks for waiting for me and I hope I didn’t disappoint 🙂


Dave

Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 4080, 55" Samsung Q80T, 32GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, HP Reverb G2, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU

Share this post


Link to post
Share on other sites

The autopilot won't engage. Anyone able to help figure out why? Also - how do I tell if the yaw dampers are on?

 

Edit: Never mind. It was the stab/mach trims not being on.

Edited by FlyingInACessna
  • Like 1

Share this post


Link to post
Share on other sites

Update: Very cool airplane, and man is it nice to have a complex airliner in the sim! Still working out how to properly conduct climbs & descents etc. but having a blast 🙂

  • Like 1

Share this post


Link to post
Share on other sites
11 hours ago, hjsmuc said:

If you want to change the shortcut to numpad, do you change this in the cameras.cfg or in the options menu? 

In the Controls > Keyboard menu.

Share this post


Link to post
Share on other sites
33 minutes ago, FlyingInACessna said:

Update: Very cool airplane, and man is it nice to have a complex airliner in the sim! Still working out how to properly conduct climbs & descents etc. but having a blast 🙂

Yeah I am having a Blast learning too. And I mean I have a lot to learn. But even that has been fun, so far. About the Yaw Dampers ( even though it was something else for you ), I am having to get used to items popping up in the MFD, like the Yaw Damper message, instead of a Light on the switch or button lighting up or turning off. But apparently that how the CRJ rolls, so I have too also! It's just different, but in a good way to me 🙂

  • Like 1

"Coffee, if your not shaking, you need another cup"
Flight Sim Break Discord Channel: https://discord.com/invite/fCV62Ka2QZ

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...