liveries skipped on reg

[motishow 123]

I have two liveries skipped but can't find where is the mistake

‎‎ in "QTR;B748;1;0;Boeing 747-8i Qatar Airways A7-HHE ‎‎;‎‎", already exists for "Boeing 747-8i British Airways G-CIVP ‎‎"
‎‎ in "UAE;B78X;1;0;Boeing 787-10 Emirates A6-EQP ‎‎;‎‎", already exists for "Boeing 747-8i British Airways G-CIVP ‎‎"
 

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

[FLTSIM.0]
title = "Boeing 747-8i Qatar Airways A7-HHE ‎‎"
model = "A7-HHE" ; model folder
panel = "" ; panel folder
sound = "" ; sound folder
texture = "A7-HHE" ; texture folder
kb_checklists = "Boeing747-400_check" ; Procedures/Checklist sibling file name
kb_reference = "Boeing747-400_ref" ; Reference information sibling file name
description = "TT:AIRCRAFT.DESCRIPTION" ; Variation description.
wip_indicator = 1 ; know if the variation is good to go or still WIP : -1=Disabled, 0=Rough, 1=1st Pass, 2=Finished
ui_manufacturer = "TT:AIRCRAFT.UI_MANUFACTURER" ; e.g. Boeing, Cessna
ui_type = "Qatar Airways A7-HHE" ; e.g. 747-400, 172
ui_variation = "Qatar Airways A7-HHE" ; e.g. World Air, IFR Panel
ui_typerole = "Commercial Airliner" ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc
ui_createdby = "Asobo Studio" ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc
ui_thumbnailfile = "" ; app relative path to ThumbNail image file
ui_certified_ceiling = 43100 ; service ceiling / max certified operating altitude (ft)
ui_max_range = 8000 ; max distance the aircraft can fly between take-off and landing in (NM)
ui_autonomy = 16 ; max duration the aircraft can fly between take-off and landing in (Hrs)
ui_fuel_burn_rate = 21160 ; average fuel consumption per hour (lbs/hr) - reminder: fuel density is ~6.7lbs per US gallon
atc_id = "     ‎‎" ; tail number
atc_id_enable = 1 ; enable tail number
atc_airline = "Qatari" ; airline name
icao_airline = "QTR" ; airline icao code
atc_flight_number = "1" ; flight number
atc_heavy = 1 ; heavy?
atc_parking_types = "GATE,RAMP,CARGO" ; "ANY" / "RAMP" / "CARGO" / "MIL_CARGO" / "MIL_COMBAT" / "GATE" / "DOCK"
atc_parking_codes = "H" ; Comma separated and may be as small as one character each
atc_id_color = "ffff00ff" ; color for the tail number : i.e. "#ffff00ff"
atc_id_font = "" ; font for the tail number
isAirTraffic = 1 ; Is the plane usable for air traffic
isUserSelectable = 1 ; Is the plane selectable by the user

[VERSION]
major = 1
minor = 0

[VARIATION]
base_container = "..\Asobo_B747_8i"

 

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

[FLTSIM.0]
title = "Boeing 747-8i British Airways G-CIVP ‎‎"
model = "G-CIVP" ; model folder
panel = "" ; panel folder
sound = "" ; sound folder
texture = "G-CIVP" ; texture folder
kb_checklists = "Boeing747-400_check" ; Procedures/Checklist sibling file name
kb_reference = "Boeing747-400_ref" ; Reference information sibling file name
description = "TT:AIRCRAFT.DESCRIPTION" ; Variation description.
wip_indicator = 1 ; know if the variation is good to go or still WIP : -1=Disabled, 0=Rough, 1=1st Pass, 2=Finished
ui_manufacturer = "TT:AIRCRAFT.UI_MANUFACTURER" ; e.g. Boeing, Cessna
ui_type = "British Airways G-CIVP" ; e.g. 747-400, 172
ui_variation = "British Airways G-CIVP" ; e.g. World Air, IFR Panel
ui_typerole = "Commercial Airliner" ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc
ui_createdby = "Asobo Studio" ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc
ui_thumbnailfile = "" ; app relative path to ThumbNail image file
ui_certified_ceiling = 43100 ; service ceiling / max certified operating altitude (ft)
ui_max_range = 8000 ; max distance the aircraft can fly between take-off and landing in (NM)
ui_autonomy = 16 ; max duration the aircraft can fly between take-off and landing in (Hrs)
ui_fuel_burn_rate = 21160 ; average fuel consumption per hour (lbs/hr) - reminder: fuel density is ~6.7lbs per US gallon
atc_id = "     ‎‎" ; tail number
atc_id_enable = 1 ; enable tail number
atc_airline = "Speedbird" ; airline name
icao_airline = "BAW" ; airline icao code
atc_flight_number = "1" ; flight number
atc_heavy = 1 ; heavy?
atc_parking_types = "GATE,RAMP,CARGO" ; "ANY" / "RAMP" / "CARGO" / "MIL_CARGO" / "MIL_COMBAT" / "GATE" / "DOCK"
atc_parking_codes = "H" ; Comma separated and may be as small as one character each
atc_id_color = "ffff00ff" ; color for the tail number : i.e. "#ffff00ff"
atc_id_font = "" ; font for the tail number
isAirTraffic = 1 ; Is the plane usable for air traffic
isUserSelectable = 1 ; Is the plane selectable by the user

[VERSION]
major = 1
minor = 0

[VARIATION]
base_container = "..\Asobo_B747_8i"

 

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

[FLTSIM.0]
title = "Boeing 787-10 Emirates A6-EQP ‎‎"
model = "A6-EQP" ; model folder
panel = "" ; panel folder
sound = "" ; sound folder
texture = "A6-EQP" ; texture folder
kb_checklists = "Boeing747-400_check" ; Procedures/Checklist sibling file name
kb_reference = "Boeing747-400_ref" ; Reference information sibling file name
description = "TT:AIRCRAFT.DESCRIPTION" ; Variation description.
wip_indicator = 0 ; know if the variation is good to go or still WIP : -1=Disabled, 0=Rough, 1=1st Pass, 2=Finished
ui_manufacturer = "TT:AIRCRAFT.UI_MANUFACTURER" ; e.g. Boeing, Cessna
ui_type = "TT:AIRCRAFT.UI_MODEL" ; e.g. 747-400, 172
ui_variation = "Emirates A6-EQP" ; e.g. World Air, IFR Panel
ui_typerole = "Commercial Airliner" ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc
ui_createdby = "Asobo Studio" ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc
ui_thumbnailfile = "" ; app relative path to ThumbNail image file
ui_certified_ceiling = 41100 ; service ceiling / max certified operating altitude (ft)
ui_max_range = 6430 ; max distance the aircraft can fly between take-off and landing in (NM)
ui_autonomy = 13 ; max duration the aircraft can fly between take-off and landing in (Hrs)
ui_fuel_burn_rate = 12350 ; average fuel consumption per hour (lbs/hr) - reminder: fuel density is ~6.7lbs per US gallon
atc_id = "     ‎‎" ; tail number
atc_id_enable = 1 ; enable tail number
atc_airline = "UAE" ; airline name
atc_flight_number = "1" ; flight number
atc_heavy = 1 ; heavy?
atc_parking_types = "GATE,RAMP,CARGO"; "ANY" / "RAMP" / "CARGO" / "MIL_CARGO" / "MIL_COMBAT" / "GATE" / "DOCK"
atc_parking_codes = "" ; Comma separated and may be as small as one character each
atc_id_color = "ffff00ff" ; color for the tail number : i.e. "#ffff00ff"
atc_id_font = "" ; font for the tail number
isAirTraffic = 1 ; Is the plane usable for air traffic
isUserSelectable = 1 ; Is the plane selectable by the user
icao_airline= "UAE"

[VERSION]
major = 1
minor = 0

[VARIATION]
base_container = "..\Asobo_B787_10"

Edited October 4, 2021 by motishow

[kiek 1,215]

22 minutes ago, motishow said:

I have two liveries skipped but can't find where is the mistake

‎‎ in "QTR;B748;1;0;Boeing 747-8i Qatar Airways A7-HHE ‎‎;‎‎", already exists for "Boeing 747-8i British Airways G-CIVP ‎‎"
‎‎ in "UAE;B78X;1;0;Boeing 787-10 Emirates A6-EQP ‎‎;‎‎", already exists for "Boeing 747-8i British Airways G-CIVP ‎‎"
 

FLTSIM.0]
title = "Boeing 747-8i Qatar Airways A7-HHE ‎‎"
atc_id = "     ‎‎" ; tail number

[FLTSIM.0]
title = "Boeing 747-8i British Airways G-CIVP ‎‎"
atc_id = "     ‎‎" ; tail number

[FLTSIM.0]
title = "Boeing 787-10 Emirates A6-EQP ‎‎"
atc_id = "     ‎‎" ; tail number

That's easy. They all have the same registration code, 4 blank characters....

You should change these lines into:

FLTSIM.0]
title = "Boeing 747-8i Qatar Airways A7-HHE ‎‎"
atc_id = "A7-HHE ‎‎" ; tail number

[FLTSIM.0]
title = "Boeing 747-8i British Airways G-CIVP ‎‎"
atc_id = "G-CIVP‎‎" ; tail number

[FLTSIM.0]
title = "Boeing 787-10 Emirates A6-EQP ‎‎"
atc_id = "A6-EQP‎‎" ; tail number

 

and your problem will be gone, and these liveries can be used by PSXT_MSFS.

[motishow 123]

thanks a lot Kiek,

thanks

Edited October 4, 2021 by motishow