Jump to content
BWBriscoe

WINGSIM - MKJP

Recommended Posts

Good Morning/Afternoon Everyone i got the airport to load with sode gates by installing it via onedrive but now the the airport loads all black no color on the terminal or taxi way. I am so close to finally fixing this problem i just need help on this last part!

Share this post


Link to post

For the red X the developer used 3 seperate names for each of  the winsocks, the model in the Sode, sim objects, WSM_MKJP is named skrg... use this in sim cfg file and the xml folder to rename this eliminated my red X   .

  • Like 1

Share this post


Link to post

@greggd, thank you.  When I get home on Wednesday I’ll do as you suggest. 👍


Ray (Cheshire, England).
System: P3D v5.3HF2 & v3.4, Intel i7-8086K o/c to 5.0Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post

@greggd, I've changed the files as per your recommendation and the windsock is now visible. :smile: Thank you.

I'm writing to the developer with your advice. Seems you know the scenery better than he does.


Ray (Cheshire, England).
System: P3D v5.3HF2 & v3.4, Intel i7-8086K o/c to 5.0Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post

Thanks i don't but logically you cannot have 3 names for same item. I had the same problem,  just had a little extra time to fiddle with it. By the way why did he use sode for static aircraft?

 

Gregg

Share this post


Link to post
5 hours ago, greggd said:

Thanks i don't but logically you cannot have 3 names for same item. I had the same problem,  just had a little extra time to fiddle with it. By the way why did he use sode for static aircraft?

Gregg

Given the way this scenery was supplied I suspect he’s good at some aspects but less so at others such as an executable for installation and SODE.

Adding static aircraft via that medium is strange to say the least. Not heard back yet.


Ray (Cheshire, England).
System: P3D v5.3HF2 & v3.4, Intel i7-8086K o/c to 5.0Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post

Ray 

I imagine the old cut and paste technique and no recheck

Gregg

Share this post


Link to post
6 hours ago, greggd said:

Ray 

I imagine the old cut and paste technique and no recheck

Gregg

Seems likely. I suspect he didn’t have v5 installed. Still not heard back.


Ray (Cheshire, England).
System: P3D v5.3HF2 & v3.4, Intel i7-8086K o/c to 5.0Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post

Finally got it too load after two days ago being fustrated enough many files had to be manually moved to root folder of p3d now all i need is the sode jetways to work it just says can't operate at this position 😞

Share this post


Link to post
2 hours ago, Haitianpilot44 said:

Finally got it too load after two days ago being fustrated enough many files had to be manually moved to root folder of p3d now all i need is the sode jetways to work it just says can't operate at this position 😞

This is the jetway solution..

The lack of jetways has been resolved. The ini file in the scenery folder had a generic path. Once I corrected it they now show.”


Ray (Cheshire, England).
System: P3D v5.3HF2 & v3.4, Intel i7-8086K o/c to 5.0Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
6 hours ago, Ray Proudfoot said:

This is the jetway solution..

The lack of jetways has been resolved. The ini file in the scenery folder had a generic path. Once I corrected it they now show.”

Sorry sir if i am not the greatest when it comes to computers and configuring files in sim but how do I correct the path as u say? I admit i have not yet checked the scenery folder today but just hearing u say “generic path” I already know im not gonna be good at fixing this on my own😂

Share this post


Link to post
5 hours ago, Haitianpilot44 said:

Sorry sir if i am not the greatest when it comes to computers and configuring files in sim but how do I correct the path as u say? I admit i have not yet checked the scenery folder today but just hearing u say “generic path” I already know im not gonna be good at fixing this on my own😂

Open the ini file with Notepad. There is a path to the location of the AFCAD file. It points to a BGL file.

The path will not be correct for your installation. Change it so it is.


Ray (Cheshire, England).
System: P3D v5.3HF2 & v3.4, Intel i7-8086K o/c to 5.0Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
9 hours ago, Ray Proudfoot said:

Open the ini file with Notepad. There is a path to the location of the AFCAD file. It points to a BGL file.

The path will not be correct for your installation. Change it so it is.

Ok in the scenery folder i found a file called configuration settings and saw the path u where talking about and it is pointing to a BGL but then what it the correct path sir? Sode? i don't know sorry for stupid questions XD but it would be really nice to get this legendary airport full working.

Share this post


Link to post

@Haitianpilot44, the correct path is to where you are now. Look in Windows Explorer towards the top of the display and it will show the path.

From memory mine is:-

C:\users\[yourname]\Documents\Prepar3Dv5 Addons\mkjp\scenery.

You can edit that file with P3D running and your aircraft positioned at the airport. After saving the new path go to the Addon menu in P3D - SODE and restart it.

All SODE objects will be generated and you should see jetways plus static aircraft.


Ray (Cheshire, England).
System: P3D v5.3HF2 & v3.4, Intel i7-8086K o/c to 5.0Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post

The path is not needed for a long time now. Just cut it off. Should look like this

[general]
afcad_path = MKJP_ADEP5_WSM.bgl

Edited by blaunarwal

OS=WIN10 Home, Sim=P3D5 actual version (P3D4 and FSX installed but unused)
Addons=ORBX, ASCA, AS, TOGA and tons of sceneries, aircraft
MB=ASUS Z390F-Gaming, CPU=i9700K OC @4.9 GHz, Cooling=Arctic Liquid Freezer II
GPU=KFA2 RTX3090 24 GB, RAM=32 GB DDR4-3200, HOTAS=Logitech G Saitek X52 Pro

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...