Jump to content
Sign in to follow this  
tf51d

Issue with major airports & SP1

Recommended Posts

Basically have been happy with FSX *pre*SP1 and same is true post SP1. However, I have run into something which did NOT occur pre - when flying near major airport like LAX, where the facility is NOT in direct view, if I pan or move the view to see the airport, I initially see a bright green color where the airport is and then the tarmac, buildings, etc slowly fill in. This is a new occurence since SP1.In fairness, this is Sp1 setup right out of the box. I deleted my original fsx,cfg and let sp1 construct a new one so no tweaks, etc have been applied.Before I start reapplying some pre sp1 tweaks I thought I'd check if anyone else has seen this specific issue.I am not getting major blurries, etc and frame rates generally have improved. Just this one little glitch.VicSystem: P4 3.4/2GDDR/GF4 7900/512PCIx XPProVisit the Virtual Pilot's Centerwww.flightadventures.comhttp://www.hifisim.com/Active Sky V6 Proud SupporterRadar Contact Supporter: http://www.jdtllc.com/


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post
Share on other sites

I also see the green before they load...


| FAA ZMP |
| PPL ASEL |
| Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 32GB 5600 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |

 

 

Share this post


Link to post
Share on other sites
Guest jshyluk

Me too, but it's very brief. I no longer get blacked-out textures, but sometimes time compression seems to cause my textures to get messed up. A quick burst of 8x TC seems to solve that issue, though, at least on my system.Jeff ShylukAvsim Product Reviewer

Share this post


Link to post
Share on other sites

>A quick burst of 8x TC seems to>solve that issue, though, at least on my system.>What is "TC"?RhettAMD 3700+ (@2585 mhz), eVGA 7800GT 256 (Guru3D 93.71), ASUS A8N-E, PC Power 510 SLI, 2gb Corsair XMS 3-3-3-8 (1T), WD 150 gig 10000rpm Raptor, WD 250gig 7200rpm SATA2, Seagate 120gb 5400 rpm external HD, CoolerMaster Praetorian


Rhett

7800X3D ♣ 32 GB G.Skill TridentZ  Gigabyte 4090  Crucial P5 Plus 2TB 

Share this post


Link to post
Share on other sites

I also have had it pre/post SP1. I have always assumed it was a neccesary evil when the sim applies textures to the object.

Share this post


Link to post
Share on other sites

Time Compression...if you have AI traffic, whenever you reduce from 8x down lower, FS refreshes scenery and such. Burst up to 8x then reduce back to 1x, and you force a scenery reload.

Share this post


Link to post
Share on other sites
Guest UlfB

Hi,Tip: You can assign a button/key to the Refresh scenery command. Easier to use.Ulf B

Share this post


Link to post
Share on other sites

>I also have had it pre/post SP1. I have always assumed it was>a neccesary evil when the sim applies textures to the object.Normally a "substitute" color (in most cases some dark grey or black) is assigned to any 3D object that shows up for the short moment when the object actually is drawed but the textures are not yet available to the graphic card - something everybody with an older system noticed. But at least for me this neon green is new in SP1, and also the long time (up to 3 sec) it is visible before the actual texture shows up. Maybe the texture paths where FSX searches for files has changed and now it takes some time? An analysis with filemon could help (see the other thread).Regards

Share this post


Link to post
Share on other sites

To reiterate part of my OP - I never had the green color or noticed it at all pre SP1.Visit the Virtual Pilot's Centerwww.flightadventures.comhttp://www.hifisim.com/Active Sky V6 Proud SupporterRadar Contact Supporter: http://www.jdtllc.com/


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post
Share on other sites

I saw the bright green untextured objects in the demo, and I was surprised to see them ...

Share this post


Link to post
Share on other sites
Guest radivil

I also gained bright green untextured objects. I used to get somewhat translucent gray objects, but now they're bright green. And seemingly only at major airports.Sure made finding KATL through the clouds a little easier last night though :D

Share this post


Link to post
Share on other sites

>Time Compression...>>if you have AI traffic, whenever you reduce from 8x down>lower, FS refreshes scenery and such. Burst up to 8x then>reduce back to 1x, and you force a scenery reload. Sure, I do that all the time reload AI.I just had never seen "TC" for time compression.RhettAMD 3700+ (@2585 mhz), eVGA 7800GT 256 (Guru3D 93.71), ASUS A8N-E, PC Power 510 SLI, 2gb Corsair XMS 3-3-3-8 (1T), WD 150 gig 10000rpm Raptor, WD 250gig 7200rpm SATA2, Seagate 120gb 5400 rpm external HD, CoolerMaster Praetorian


Rhett

7800X3D ♣ 32 GB G.Skill TridentZ  Gigabyte 4090  Crucial P5 Plus 2TB 

Share this post


Link to post
Share on other sites

Thought I would add...that I am seeing the purple and green textures too; and I did not see them in FSX RTM. They do not last "3 seconds" however. It's very quick. I see a similar thing with white-green-white civilian tower lights at night--I see the light cones for about 1s before the texture loads.I have not had time to tweak any of the settings mentioned on the blogs though. I think one of them specifically relates to this issue, so I reserve all judgment.RhettAMD 3700+ (@2585 mhz), eVGA 7800GT 256 (Guru3D 93.71), ASUS A8N-E, PC Power 510 SLI, 2gb Corsair XMS 3-3-3-8 (1T), WD 150 gig 10000rpm Raptor, WD 250gig 7200rpm SATA2, Seagate 120gb 5400 rpm external HD, CoolerMaster Praetorian


Rhett

7800X3D ♣ 32 GB G.Skill TridentZ  Gigabyte 4090  Crucial P5 Plus 2TB 

Share this post


Link to post
Share on other sites

>>I have not had time to tweak any of the settings mentioned on>the blogs though. I think one of them specifically relates to>this issue, so I reserve all judgment.Agreed! Lot's of new data to absorb - Visit the Virtual Pilot's Centerwww.flightadventures.comhttp://www.hifisim.com/Active Sky V6 Proud SupporterRadar Contact Supporter: http://www.jdtllc.com/


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...