August 9, 20223 yr 1 minute ago, tjrush said: Supported Aircraft For MSFS FENIX Airbus A320 Leonardo MaddogX PMDG 736-NGXU PMDG 737-NGXU Has there been an answer to the question - If we don't fly these aircraft, does the program work? What is the restriction for unsupported aircraft? Answered here. 1 hour ago, alpha117 said: Sorry, busy currently. These are the aircraft that supports FMC Flightplans You can use whatever aircraft you have.
August 9, 20223 yr Looks Interesting, I purchased the original version for FSX back in 2014 so assume I will be eligible for the 39.95 Euro version which works out to about $50 CDN Hopefully there will be some reviews in the not too distant future. Richard i7-12700K | Noctua NH-D15S Black Version | MSI Pro Z690 - A | 32 GB DDR4 3600 | Gigabyte Gaming OC 4090 | 1TB WD Blue NMVe (MSFS 2020) | 500 GB WD Black Gen 4 NVMe | 4TB WD Black Conventional | Fractal Design Torrent Case | Seasonic 1000W Gold Plus PSU | Thrustmaster Boeing Yoke | Honeycomb Throttle | Airbus Side Stick | Virpil Rudder Pedals | Sony X90K 55 Inch TV |
August 9, 20223 yr Will it import Simbrief flight plans? Steve Canham MSFS 2024, FSHud, FSLTL, GSX Pro, Active Sky FS, Cabby (cabin announcements), Simbrief, Navigraph, WWACARS, PMDG CPU-Ryzen9 7800X, RAM-2x32GB DDR5, GPU-RTX4070Ti. Samsung 2TB SSD, Samsung 49" Odyssey Curved Screen
August 9, 20223 yr Commercial Member 4 minutes ago, scanham said: Will it import Simbrief flight plans? Sure does Clive Joy
August 9, 20223 yr 7 hours ago, davenicoll said: Is this any good with VFR?... Is it similar to VOX ATC for Prepar3d? I would second this question. But it seems this is vor IFR only. Sorry, but no VFR support means no buy for me.
August 9, 20223 yr One of the items mentioned in the first post is that it will handle AI traffic. On the Features page of the web site, though, it says this about AI traffic: "AI is recognized and managed (on ground on holding position only)." Does that mean it only controls them if they are holding short of a runway? Where else does it control them?
August 9, 20223 yr It seems the program only has partial support for the Fenix A320. Co-pilot can only set the comms. (can't set flaps, gear, spoilers?) There was another Fenix limitation I found too but can't recall it at the moment and their "Features" page is currently down. Mark Edit: Was able to get back onto the feature page. Here is the other pointed mentioned about the Fenix: The GPS flightplan for all supported third party aircraft can be generated automatically, but you have to load it via FMC. Not possible yet with the Fenix Airbus. But you may download the flightplan via SimBrief. Edited August 9, 20223 yr by Gate99 i9-13900K @ 5.8Ghz / Asus TUF 4090 OC / 32 GB DDR 5 / Corsair 1000W PS / Pimax Crystal / 2 SATA SSD / 2TB M2 SSD/ DOF Reality H3 motion platform/ Win 11
August 9, 20223 yr I purchased Oct 2015 for $58 (US)./ 50 EUR using PayPal. Best Regards, Vaughan Martell PP-ASEL KDTW
August 9, 20223 yr As a long time user of Pro ATC X, I just purchased this version for MSFS. Sadly, I have not received my email containing my lic key or download links. Ive checked my SCAM/Junk folders just to make sure the confirmation email hasnt been moved there. I got confirmation from PayPal to indicate the transaction went through. I can only guess that perhaps their store system is under heavy load, after 30 mins I still havent received my license key/download link yet.
August 10, 20223 yr 1 hour ago, c912039 said: As a long time user of Pro ATC X, I just purchased this version for MSFS. Sadly, I have not received my email containing my lic key or download links. Ive checked my SCAM/Junk folders just to make sure the confirmation email hasnt been moved there. I got confirmation from PayPal to indicate the transaction went through. I can only guess that perhaps their store system is under heavy load, after 30 mins I still havent received my license key/download link yet. Interested in your thoughts once you get it going. Have you used any other ATC solutions for MSFS?
August 10, 20223 yr 50 minutes ago, Virtual-Chris said: Interested in your thoughts once you get it going. Have you used any other ATC solutions for MSFS? Once I finally get my key and download link from Pointsoft, Ill install and probably post my thoughts in the 'first impressions' thread, rather than here. I own Pilot2ATC, FS HUD, and now PROATCSR for MSFS. I purchased each of these (in order shown above) to improve on the default ATC, as well as getting close to the ATC experience I am used to in P3D (with PROATCX). I purchased FS HUD, because I wasnt quite happy with aspects of Pilot2ATC. I purchased PROATCSR because of prior knowledge of the product (in P3D) but also, because there are aspects of FS HUD that I'm not quite happy with. It may take me a few days to really dig into PROATCSR to know what has carried over from the P3D versions (that are appropriate in MSFS), and is lacking (due to differences between P3D and MSFS), Then I hope to be able to write up a summary of positive and negative aspects of each of the products.
August 10, 20223 yr 2 minutes ago, c912039 said: Once I finally get my key and download link from Pointsoft, Ill install and probably post my thoughts in the 'first impressions' thread, rather than here. I own Pilot2ATC, FS HUD, and now PROATCSR for MSFS. I purchased each of these (in order shown above) to improve on the default ATC, as well as getting close to the ATC experience I am used to in P3D (with PROATCX). I purchased FS HUD, because I wasnt quite happy with aspects of Pilot2ATC. I purchased PROATCSR because of prior knowledge of the product (in P3D) but also, because there are aspects of FS HUD that I'm not quite happy with. It may take me a few days to really dig into PROATCSR to know what has carried over from the P3D versions (that are appropriate in MSFS), and is lacking (due to differences between P3D and MSFS), Then I hope to be able to write up a summary of positive and negative aspects of each of the products. That would be awesome! I'm considering all three of these products for my own ATC solution. Edited August 10, 20223 yr by Virtual-Chris
August 10, 20223 yr 58 minutes ago, c912039 said: Once I finally get my key and download link from Pointsoft, Ill install and probably post my thoughts in the 'first impressions' thread, rather than here. I own Pilot2ATC, FS HUD, and now PROATCSR for MSFS. I purchased each of these (in order shown above) to improve on the default ATC, as well as getting close to the ATC experience I am used to in P3D (with PROATCX). I purchased FS HUD, because I wasnt quite happy with aspects of Pilot2ATC. I purchased PROATCSR because of prior knowledge of the product (in P3D) but also, because there are aspects of FS HUD that I'm not quite happy with. It may take me a few days to really dig into PROATCSR to know what has carried over from the P3D versions (that are appropriate in MSFS), and is lacking (due to differences between P3D and MSFS), Then I hope to be able to write up a summary of positive and negative aspects of each of the products. Looking forward to it!
Archived
This topic is now archived and is closed to further replies.