Jump to content
Sign in to follow this  
Bill A

CTD even in Safe Mode

Recommended Posts

Hi all, in SU10 even in safe mode, if I adjust anything in the sim menus, for example traffic or now even changed graphics death of field from High to off and clicked save I get a ctd


Asus Tuf Gaming Plus B550 - Asus Ryzen 9 5800X3D - Asus GeForce 4080 RTX OC Edition - 64GB DDR4 Ram 3600Mhz - EVGA 850W Power Supply - 2X 1 TB NVME PCIE gen 4 - Windows 10

Share this post


Link to post
Share on other sites
6 minutes ago, Bill A said:

Hi all, in SU10 even in safe mode, if I adjust anything in the sim menus, for example traffic or now even changed graphics death of field from High to off and clicked save I get a ctd

Clearly you have system issues. Over clocking or failing components most probable cause IMHO

Share this post


Link to post
Share on other sites
5 minutes ago, btacon said:

Clearly you have system issues. Over clocking or failing components most probable cause IMHO

Or maybe he doesn’t? There is a known problem causing CTD’s.

Are you running DX12? Is it the ‘your graphics device has encountered a problem’ error? 

Share this post


Link to post
Share on other sites

I am experiencing a CTD in about half my flights - empty Community/DX12 and all forms of DLSS or TAA. It does seem to possibly related to Overclocking.  My i7-9700K is rock solid at 4.9 GHz with a slightly lowered processor voltage to aid in cooling.  I can run 3DMark (any variety for hours at a time)  or any other benchmark with no problems.  But even backing the OC off to 4.5 seems to lead to MSFS CTD.  Running at stock speed I seldom have a CTD.  

Having said all that - the same 4.9 OC and MSFS worked perfectly for many hours a day before SU10. 

And the CTD I get now with DX12 frequently kills Windows.  MSFS locks up with the sending MS a report message and I loose the mouse cursor and keyboard control.  I have to use ALT+F4 to get out of MSFS and sometimes I need to do a Windows restart to get anything to work again.  Never had that severe a problem prior to SU10. 

 

 


i7-9700K @4.9 GHz  / Gigabyte Z390 Aorus Pro Mobo / 32 GB DDR4 / RTX 3060 Ti 8GB GPU / AORUS FO48U 4k display
 SSD for Drive C and another SSD dedicate to Flight Sim / 1 GB Comcast Xfinity Internet connection / HP Reverb G2 / Tobii 5 Head & Eye Tracking

read about me and my sailing adventures at www.svmirador.net/WebsiteOne/ or at Flickr TacomaSailor

Share this post


Link to post
Share on other sites

I removed everything from the community folder and started to put things back little by little and so far all seems good. 


Asus Tuf Gaming Plus B550 - Asus Ryzen 9 5800X3D - Asus GeForce 4080 RTX OC Edition - 64GB DDR4 Ram 3600Mhz - EVGA 850W Power Supply - 2X 1 TB NVME PCIE gen 4 - Windows 10

Share this post


Link to post
Share on other sites

good luck to you sir 


9900k, RTX3080 12 GB ,maximus hero XI, Arctic Freezer 280 AIO, Phanteks Mesh case, 32GB steel series ram (3000 GHZ) , x3 Samsung Evo's 480 GB for scenery, intel 1660p 2TB nvme for P3D and addons /Scenery, Adata 480GB nvme for OS win11, 2 TB SSHD for everything else, 43" LG 4K TV for the sim(1440P) , second 27" monitor for charts/ YouTube etc. Warthog Stick, TCA ( Airbus) Throttle and Logitech  pedals, Razer keyboard and mouse, oh and a usb fan to cool me down on approach !

Share this post


Link to post
Share on other sites
1 hour ago, TacomaSailor said:

I am experiencing a CTD in about half my flights - empty Community/DX12 and all forms of DLSS or TAA. It does seem to possibly related to Overclocking.  My i7-9700K is rock solid at 4.9 GHz with a slightly lowered processor voltage to aid in cooling.  I can run 3DMark (any variety for hours at a time)  or any other benchmark with no problems.  But even backing the OC off to 4.5 seems to lead to MSFS CTD.  Running at stock speed I seldom have a CTD.  

Having said all that - the same 4.9 OC and MSFS worked perfectly for many hours a day before SU10. 

And the CTD I get now with DX12 frequently kills Windows.  MSFS locks up with the sending MS a report message and I loose the mouse cursor and keyboard control.  I have to use ALT+F4 to get out of MSFS and sometimes I need to do a Windows restart to get anything to work again.  Never had that severe a problem prior to SU10. 

 

 

Experiencing the same though I have no Overclocking on processor or graphics card. I also get the CTDs and Windows failure on DX11 and DX12.

I have been experiencing this since SU10.  System was rock solid before. 

I used DDU to remove my Nvidia drivers and reinstalled using NVClean install....so far so good, (I installed the new Nvidia stereo drivers), but I have only tested two flights and flown less than 2hours. Usually I get the CTDs and lockups within 10 minutes of starting my flight.

PS. I fly exclusively in VR. 


Robin

Share this post


Link to post
Share on other sites
6 minutes ago, Romeo_Tango said:

Experiencing the same though I have no Overclocking on processor or graphics card. I also get the CTDs and Windows failure on DX11 and DX12.

I have been experiencing this since SU10.  System was rock solid before. 

I used DDU to remove my Nvidia drivers and reinstalled using NVClean install....so far so good, (I installed the new Nvidia stereo drivers), but I have only tested two flights and flown less than 2hours. Usually I get the CTDs and lockups within 10 minutes of starting my flight.

PS. I fly exclusively in VR. 

this really look like a system issue. Unless it's specific to VR. Rock solid on my side. 

Edited by fogboundturtle

https://fsprocedures.com Your home for all flight simulator related checklist.

Share this post


Link to post
Share on other sites
3 minutes ago, fogboundturtle said:

this really look like a system issue. Unless it's specific to VR. Rock solid on my side. 

Perhaps you are correct...Strange, the problem started right as I installed SU10. Also strange so many are now having similar CTDs, right after installing SU10.

Keeping my fingers crossed that the driver update that I did solves the problem. I also intend to search for a BIOS update for my motherboard.


Robin

Share this post


Link to post
Share on other sites
1 minute ago, Romeo_Tango said:

Perhaps you are correct...Strange, the problem started right as I installed SU10. Also strange so many are now having similar CTDs, right after installing SU10.

Keeping my fingers crossed that the driver update that I did solves the problem. I also intend to search for a BIOS update for my motherboard.

Many people are having CTD's because they didn't update mods that need to be updated for SU10. Don't know if that is your case. Always try with an empty community folder first so you can exclude that.


Alvega

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...