Even with everything tuned down on FSLTL still some stutters

[altenae]

Been flying around without almost no stutters for months.

Starting to use FSLTL and even when everything is tuned down there are always stutters at airports.  
 

Anyone else also experience this ?

[Bobsk8]

7 minutes ago, altenae said:

Been flying around without almost no stutters for months.

Starting to use FSLTL and even when everything is tuned down there are always stutters at airports.  
 

Anyone else also experience this ?

I have been using FSLTL for a few months and it hasn't caused any stutters at all. What are the specs on your PC and settings. 

[altenae]

23 minutes ago, Bobsk8 said:

I have been using FSLTL for a few months and it hasn't caused any stutters at all. What are the specs on your PC and settings. 

MSI Tomahawk Z790, I7-13700K, DDR5 6000mhz, MSI 4090, 3x SSD 980 PRO, Corsair 360 Liguid CPU cooler, Corsair H1200V2 power.

[Vel]

FSLTL models use 4K textures so this may be the source of your stutters. I resized the textures to 2K

If you would like to try it, the software and instructions to do so are here: https://izn-flightsim.s3.amazonaws.com/textureoptimizer.html

Its really easy to do and requires very little effort. 

[Bobsk8]

Try this and see if it helps. 

 

[Bones62]

The only time I have issues is at heavy add-on airports. I got rid of the heavy add-on airports. 😁 I'm also not using a complex add-on aircraft...yet...looking at you, A2A.

[altenae]

Thinking about downsizing the textures but that seems to be a hit and miss
 

 

[Vel]

5 minutes ago, altenae said:

Thinking about downsizing the textures but that seems to be a hit and miss
 

 

It cetainly helped on my low/mid range system with an AMD Ryzen 9 3900, 32GB memory and an RTX 2070 Super.

A new set of files is created by the software I linked, so you can swap back and forward between 4K and 2K to see if it helps.

The only real investment is the time it takes to install and run the conversion software.

Hope this helps.

[Fiorentoni]

what does "tuned down" mean? Down to 0? Or down to 30?

My first suspect would be photogrammetry and the second suspect would be the airport scenery.

[HiFlyer]

I cant even go anywhere near the settings in that video at JFK, especially at night, without it looking like Devils Tower at the end of Close Encounters Of The Third Kind. (getting dive-bombed by a zillion ufos)

Blinking lights and flying objects filling the entire sky.... (Not to mention major plane traffic jams on the ground)

Edited May 18, 2023 by HiFlyer

[Alpine Scenery]

It is partly the last few updates have caused some random issues when flying for a while (30+ mins), sometimes it gets slower and starts stuttering. It has happened in places it would not normally happen before, but part of is the FSLTL stuff does contribute and make these worse and more noticeable. The performance is still fine most of the time, but this version isn't the fastest for non-DLSS, as I think the fastest version was maybe 2-3 updates ago, forget.

 

Edited May 18, 2023 by Alpine Scenery

[altenae]

15 hours ago, Vel said:

It cetainly helped on my low/mid range system with an AMD Ryzen 9 3900, 32GB memory and an RTX 2070 Super.

A new set of files is created by the software I linked, so you can swap back and forward between 4K and 2K to see if it helps.

The only real investment is the time it takes to install and run the conversion software.

Hope this helps.

Tried with the suggested software but was not successful.  

[rob0203]

20 hours ago, altenae said:

Been flying around without almost no stutters for months.

Starting to use FSLTL and even when everything is tuned down there are always stutters at airports.  
 

Anyone else also experience this ?

I use FSTraffic liveries with Fsltl and it is a big improvement performance wise 

[ThomseN_inc]

1 hour ago, rob0203 said:

I use FSTraffic liveries with Fsltl and it is a big improvement performance wise 

How am i actually doing this? I'd like to try that but didn't find any info. Thanks!

[rob0203]

If you have FSTraffic, you can change the Fsltl settings to prefer FSTraffic liveries.
Just start Fsltl and then say yes when it ask do you want to change settings.

I don't even have the Fsltl livery package installed only use Fstraffic liveries.

Edited May 18, 2023 by rob0203