Can MSI MPG Z590 M/B support the RTX 4070 TI?

[forshaw 47]

Hello Folks;

So i currently have a RTX 3060 (low end of the 30 series) and wanted to upgrade to the RTX 4070 TI since I am struggling with the 3060 and wanted to take advantage for FR Generation etc.etc. and to other goodies that goes along with the 70 series. I don't want to go crazy since I will be CPU limited anyway.

I have a MSI MPG Z590 Gaming Edge M/B (PCIe 4.0) however when I installed the 4070 Ti its doesn't boot the monitor up, At first, I thought it was a DOA card but I returned it to the local store and got another brand new card and the same issue, can't be 2 bad cards in a row🙂. I am now thinking that the MB may not support this card which is strange since based on my research it actually does. When I boot up my PC the GPU power "red" light goes and stays on, I am using the power auxiliary cables that were provided so power connections are all good on that end.

Did anyone on this forum have this issue or happen to know if this is indeed an incompatibility issue? I am just about to return the card for a refund, and a little disappointed since I was looking forward to the upgrade.

 

Thanks.

 

Kindest Regards.

Forshaw.

[YukonPete 563]

15 minutes ago, forshaw said:

Hello Folks;

So i currently have a RTX 3060 (low end of the 30 series) and wanted to upgrade to the RTX 4070 TI since I am struggling with the 3060 and wanted to take advantage for FR Generation etc.etc. and to other goodies that goes along with the 70 series. I don't want to go crazy since I will be CPU limited anyway.

I have a MSI MPG Z590 Gaming Edge M/B (PCIe 4.0) however when I installed the 4070 Ti its doesn't boot the monitor up, At first, I thought it was a DOA card but I returned it to the local store and got another brand new card and the same issue, can't be 2 bad cards in a row🙂. I am now thinking that the MB may not support this card which is strange since based on my research it actually does. When I boot up my PC the GPU power "red" light goes and stays on, I am using the power auxiliary cables that were provided so power connections are all good on that end.

Did anyone on this forum have this issue or happen to know if this is indeed an incompatibility issue? I am just about to return the card for a refund, and a little disappointed since I was looking forward to the upgrade.

 

Thanks.

 

Kindest Regards.

Forshaw.

How many watts is your PSU? Sounds like a power problem. Min you need is a 650w. I personally wouldn't go below, 750w. Also, plugging the adapter into one cable can be an issue. You want to split the power draw and use two CPU/PCIe ports on the PSU.

Edited September 4 by YukonPete

[somiller 694]

If you put your 3060 back in does it work? As far as MB support, of course it supports a 4070. As Pete says it may be power related, or possibly check bios setting to ensure the 4070 is selected instead of on-board video - the 4070 shows up in bios doesn't it?

[forshaw 47]

Hello YokonPete and Somiller;

Thank you both for your responses I appreciate it. My power unit is enough I have got 800w 80+ Gold Certify; that's the 1st thing I confirmed before I bought the card.

My current 3060 is working fine which is what I am using as a fall back. I am doing a straight swap out from one working card to a new card so on-board is "not" selected. 

2 hours ago, somiller said:

the 4070 shows up in bios doesn't it?

I wouldn't know if the 4070 shows in the bios since it not booting to the monitor I can't see anything. Just out of curiosity why would 4070 show up in the bios 🤔

I am stumped.

Thanks again.

Cheers

Forshaw.

[Bob Scott 7,306]

My first suspicion would be a bad/incompatible cable or (if modular) a bad cable connector on the PSU.

Did you use a cable provided with the PSU/computer, or with the GPU?  The modular plugs on different PSUs are not standardized, so a cable from a source other than the PSU manufacturer may have a different pinout on the PSU end than the socket on the PSU.

If the cable is from the PSU manufacturer (or the computer OEM), then I'd try swapping cables (most of my PSUs come with four) and/or using different socket(s) on the PSU.  Also, make sure connectors on the PSU are firmly and completely seated in the socket.

And as mentioned above, if there are multiple GPU power connectors, do *not* use a single cable with two connectors daisy-chained on the end.  Use two separate cables.

[Ixoye 1,614]

I use two separate cables from my PSU, and connect them with the "two to one" cable that was included in the box (Asus TUF 4070TI)

Btw, your motherboard support 40 series GPU.

Edited September 5 by Ixoye

[forshaw 47]

On 9/5/2023 at 5:27 PM, Ixoye said:

I use two separate cables from my PSU, and connect them with the "two to one" cable that was included in the box (Asus TUF 4070TI)

Btw, your motherboard support 40 series GPU.

Sorry for the delayed response since I was travelling.

Yes that's exactly what I had to do. I had to use a separate set of cables from my PSU to pair it into the 2 to 1 cable included in the box. The card has been working like a charm and enjoying it, coming from a 3060 it's really helping

Thanks again.

Forshaw.

[forshaw 47]

On 9/5/2023 at 5:27 PM, Ixoye said:

I use two separate cables from my PSU, and connect them with the "two to one" cable that was included in the box (Asus TUF 4070TI)

Btw, your motherboard support 40 series GPU.

 

On 9/4/2023 at 2:35 PM, Bob Scott said:

My first suspicion would be a bad/incompatible cable or (if modular) a bad cable connector on the PSU.

Did you use a cable provided with the PSU/computer, or with the GPU?  The modular plugs on different PSUs are not standardized, so a cable from a source other than the PSU manufacturer may have a different pinout on the PSU end than the socket on the PSU.

If the cable is from the PSU manufacturer (or the computer OEM), then I'd try swapping cables (most of my PSUs come with four) and/or using different socket(s) on the PSU.  Also, make sure connectors on the PSU are firmly and completely seated in the socket.

And as mentioned above, if there are multiple GPU power connectors, do *not* use a single cable with two connectors daisy-chained on the end.  Use two separate cables.

Thanks, yes problem solved, As stated in my other post it was on me not pairing the correct 6 pic connectors from the PSU to connect to the provided cable for the card. All good and running great.

 

Cheers.

 

Forshaw.