Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Jacumba Airport (L78) San Diego

Featured Replies

“Flying over, or driving by on Interstate 8, you might miss tiny Jacumba. But hundreds of soaring enthusiasts know the airport and some even know where the town is. However, few people know what Jacumba is all about. On weekends you’ll find sail planes being towed aloft to catch the thermals, with pilots who savor the solitude and challenge of powerless flight. During the week the airport is quiet, inhabited by hawks and their prey.” Source: County of San Diego

Free to download for PC: https://flightsim.to/file/66976/jacumba-airport-l78

XTJH14c.png

Features

  • Terraforming to level and match elevation + relief of the area
  • Add the Solar farm and the Powerplant of the Jacumba Valley Ranch Energy Park
  • Add winch(s) for gliders
  • Add the border wall ;(
  • Add small specific signs (and some “Help wanted”)
  • Add static gliders on apron
  • Remove several erroneous buildings on hills around the field
  • Replace the runway marking with custom one (bigger numbers)
  • Fix vegetation at close proximity of the field
  • A lot of correction on ground textures

More info for pilots

Field elevation is 2844 feet MSL, CTAF on 122.900, no services available, runway 07-25 is an asphalt of 2562 x 60 feet (781 x 18 meters). Right pattern for runway 25 and left traffic runway 7. Use caution with the hill facing runway 7. Airfield is located along the 8 Hwy.

Use extreme caution for the US/Mexican border (ADIZ) which is very (very) close, approximately 615 ft of runway 0-25. Frequent gliders during weed-ends, powered aircraft be alert for glider traffic launching from the field and operating on and in the vicinity of airport, surface to 18000 ft MSL. Rapid rising terrain all quadrants.

XvDutEq.jpeg

ITNMQX1.jpeg

Free to download for PC: https://flightsim.to/file/66976/jacumba-airport-l78

More pic available in the screenshots section: 

 

Edited by vbazillio

Vincent B.
Check my free MSFS sceneries : https://flightsim.to/profile/vbazillio/trending and my hardware configuration.

@vbazillio Just to say, I recently discovered your freeware airports on FS.TO and they are fantastic quality for freeware.  Thanks so much for the time you put into them, for our enjoyment.

Bill 😎
FS2024 • Currently in 'GA mode' : A2A Comanche 2024 & Aerostar • Black Square C208, Bonanzas, Barons, TBM850, Dukes • COWS DA40 & DA42 • FSW Legacy, C24R Sierra & C414 • Echo Falco F8L • FFX HJET, Visionjet and P180 2024 • Got Friends A32 Vixxen • FSReborn Sirius TL3000, Sting S4 and Piper M500 • Flyboy Rans S6S • Skyward DA50RG • SWS Zenith CH701, RV-8, RV-10, RV-14, PC12 • Milviz C310R • Air Foil Labs Bristell B23 
TrackIR • BeyondATC • PMS GTN Payware • RealTurb • Axis & Ohs • FS Realistic Pro
9800X3D • RTX 3080 • 64GB DDR5-6000
NPPL licence holder in the UK

I flew out of there last night when I saw it on .to, very nice airport, thank you!

Dave

Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU

Waaay down there on the border hehe.  Very nice thanks Vincent for another gem.

My Liveries | FAA ZMP | PPL ASEL |
| Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |

 

 

Thanks Vincent for all your work creating these fine airports.

AMD Ryzen 7 5800x3d, MSI X570 Pro, 32 gb DDR4 3600 ram, Gigabyte 6800 16gb GPU, 1x 2tb Samsung  NvMe , 1x 2tb Sabrent NvME, 1x Crucial 4tb Nvme M2 Drive

More awesome work Vincent! Great stuff! I am about to depart on a ski trip, but I will have to check this one out upon my return 🙂 

AMD Ryzen 9900X3D & ASUS X870E Gaming Plus MB, w/64 Gb GSkill DDR5 RAM, PNY RTX 5090 GPU, lots of SSD's and M.2 drives, HAVN  Case, Virpil VPC Panels 2 and 3, Virpil Constellation Alpha Stick, Virpil Rotor TCS Plus w/ Hawk-60 Collective grip, TM TCA Yoke Boeing Edition, TM HOTAS A-10 and F/A-18 Sticks and TM TPR Rudder pedals. Currently on Win11

 

 

yup, same feeling here, i have downloaded several of your airports and they are all fantastic, great job and thanks for sharing 👍

Downloaded and enjoying!!! Thanks!

Merci Vincent, 👍

Beatiful Airports!! 😃 as another poster said.. +1 wow another beatifully crafted gem of freeware!! Thanks so Much!

How I really wished that you and other talentented users/creators could be used or included as custom Terminal or airport buildings in the New Microsoft upcoming MSFS-2020 FREWARE *Scenery Gateway*

It will really be limiting for airport editing "if the only thing" you can use is default assets.. (included with the game)

 

Best regards Rune ENHD

Edited by Rune-ENHD
Adding info

  • 4 months later...

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.