Jump to content
Sign in to follow this  
rpowers

Best Flight yet in FSX

Recommended Posts

Guest mz-cd

After all the moans and groans about FSX [including me] I thought I should tell all about the following.I messed up FSX the other day so decided to do a clean install,ok no probs there.I was looking for some different to try so decided on VictoriaPlus by Don Grovestine,Jon Patch and Holger Sandmann [available in the Avsim library]I also downloaded the Custom AI file by Don Grovestine.Also Kelowna airport by R.A. Baum.All installed ok.I decided on a trial flight from Kelowna to Victoria International to see what happened.I set up an IFR trip in the flight planner using the De Havilland DC8-300 by Premier Aircraft Design.Well I have to say it was stunning.The trip was flying west at dusk into the setting sun and using real world weather.The Vicplus is a truly great addon. Full of detail.I set my sim settings as suggested in the write up.It covers a fairly big area and there is loads to do for the floatplane and GA enthusiast.Despite the heavy graphics my system handled it well. An average of 20 FPS at Vic. and well into the 70's at 12000ft.I have NOT tweaked ANYTHING nor did I run Ati Tray Tools as I have been doing.This addon/s is really well worth trying.A QUESTION.Despite the good frame rates they did fluctuate considerably. Now I remember reading something about a formula one can put in the CFG file to even out the frame rates. Does anyone know of this and if so is it worth trying OR is there any other way of evening out the frame rates.RegardsRichard

Share this post


Link to post
Share on other sites

Sounds like you have it set up as unlimited so maybe locking the frames to the point they do not fluctuate like 20 or 30.The evening of the frame rates could refer to the average frame rates in the frame rate counter. This gives a high, low and average and adds a v: percentage. That percentage is what I use to guage my frame rates, the higher that number the worse the sim runs so I try to keep my fps lock at a number that maintains the V percentage below 1 or 2 percent.I can't remember what the V stands for, maybe video utilization or something. You have to add a line to the config, but I can't remember what it was off hand.

Share this post


Link to post
Share on other sites
Guest mz-cd

Thanks Ian, yes I run my frame rates unlimited as I have always done as that is what works best for me. It is suggested in the Vicplus write up that this is the best configuration to use.The fluctuation I get is substantial, something like 30 or 40. If I run at a set figure, ie 25 then I get a drop to something like 5.I read about this formula in the forum here but can't now find it.I did also read something about setting the frame rate to something divisible by the refresh rate!!!!!!.All a bit complicated but maybe some one can shed some light on this.RegardsRichard.

Share this post


Link to post
Share on other sites

The refresh rate of your monitor, for example I have a dell 19 inch with a refresh rate of either 60 or 70. Setting a frame rate divisible by either of those numbers like 20 or 35 etc.... I think this had more to do with blurries than frame rate fluctuation, I believe with unlimited set, frame fluctuation is unavoidable.

Share this post


Link to post
Share on other sites

>I can't remember what the V stands for, maybe video>utilization or something. You have to add a line to the>config, but I can't remember what it was off hand."Volubility*" - although I personally think that "Variance" is more apt and simpler to comprehend.In any case, the smaller the *V*, the smoother the performance.* "Moving with ease and smoothness.."


Fr. Bill    

AOPA Member: 07141481 AARP Member: 3209010556


     Avsim Board of Directors | Avsim Forums Moderator

Share this post


Link to post
Share on other sites

That's the one. I remember seeing an explanation of the Variance and it has to do with the percentage between the low fps number and the average fps I think, so if you hit a high scenery/traffic area or, as happens with ASX, it begins updating weather, and frames drop, the V percentage will increase.

Share this post


Link to post
Share on other sites
Guest mz-cd

I guess I will leave things as they are as it is not really a problem.RegardsRichard

Share this post


Link to post
Share on other sites

Where did you get Kelowna airport by R.A. Baum,I searched here and could not find it.Is it for FS9?Thanks,Ron


Bring back Chief Illiniwek!University of Illinois.

Share this post


Link to post
Share on other sites
Guest mz-cd

I found it at the Perfect Flight site.It is for BOTH FS9 and FSXwww.perfectflight.org [Perfectflight 2000 project-latest sim news] On the left you will see a list of places to go to. Select the search engine under the FREE downloads, type in fsx scenery and then scroll through until you find it.RegardsRichard

Share this post


Link to post
Share on other sites

Thanks,I found it under FS9 @ Flightsim.Funny thing is I already had it installed but ver2 not 3.Ron


Bring back Chief Illiniwek!University of Illinois.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...