January 12, 20251 yr 3 hours ago, Christopher Low said: Presumably they will be updating everything to make sure that this does not happen again? like they have never done before in peak times ? Its about money Chris, always was and always will be.
January 12, 20251 yr 3 hours ago, edpatino said: So, MSFS2020 is back to normal now, yes or no? Yes, for me. I haven't had a problem with it. Surely not everybody was kung fu fighting. https://rationalwiki.org
January 12, 20251 yr 4 hours ago, edpatino said: So, MSFS2020 is back to normal now, yes or no? My 2020 FPS are in the dumpster this morning. 13-15 fps with the PMHDG 737, never seen anything like that before.
January 12, 20251 yr 58 minutes ago, Bobsk8 said: My 2020 FPS are in the dumpster this morning. 13-15 fps with the PMHDG 737, never seen anything like that before. I tried it earlier this morning and all seems to be back to normal again. Moreover, I did notice a shorter "checking for updates" lapse, of approx. half of what it was last friday. All the rest normal using the Microsoft ATR 42-600 over a semi-complex scenery with PG. A bit off topic, but to render my sim more fluid I started using the Lossless Scaling utility several months ago and got MSFS2020 running at almost constant 60 fps since (depending on the aircraft and scenario complexity of course), without stuttering. This is using the 60 Hz refresh rate of my current PC monitor. This utility was recently updated (on January 10th) to add better Frame Generation (in-utility LSFG from 2.3 to 3.0). Priced at less than $4 on Steam it's a high value utility. Fully recommended. Let's hope that the MS/Asobo guys will not mess up FS2020 again with the FS2024 virus 😆 Edited January 12, 20251 yr by edpatino Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
January 12, 20251 yr 13 hours ago, Greazer said: Something tells me Msobo are out to get 2020 simmers. Misspelled and nonsensical.
January 12, 20251 yr I'm kind of happy that this happened because they fixed the long load while checking for updates. Now the sim loads with my chosen add-ons in less than 3 minutes. Those one extra minutes add up. MSFS
January 12, 20251 yr 1 hour ago, edpatino said: A bit off topic, but to render my sim more fluid I started using the Lossless Scaling utility several months ago and got MSFS2020 running at almost constant 60 fps since (depending on the aircraft and scenario complexity of course), without stuttering. This is using the 60 Hz refresh rate of my current PC monitor. This utility was recently updated (on January 10th) to add better Frame Generation (in-utility LSFG from 2.3 to 3.0). Priced at less than $4 on Steam it's a high value utility. Fully recommended. Let's hope that the MS/Asobo guys will not mess up FS2020 again with the FS2024 virus 😆 I don't have "Lossless Scaling". Is this something for those that do not have cards to enable FG in MSFS2020 or MSFS2024? I have an RTX4070Ti Super and I do enable FG in-sim. Like you I also have a 60 Hz 41" Samsung Monitor. I get a smooth 57 FPS (locked thru RTSS), but I also use "MSFS_AutoFPS". Edited January 12, 20251 yr by TomCYYZ i913900KF (5.8GHz) | Case: Fractal PopAir RGB I Gigabyte Z790 UD AX| MSI Gaming RTX 4070Ti Super 16GB | Kingston Fury Beast 64GB DDR5 5200Mhz | SOLIDIGM P41 Plus 2TB NVMe M.2 SSD | Samsung SSD 870 EVO 2TB | Thermalright Frozen Notte 240 MM Liquid Cooling | LG EVO 42" Monitor 3840 x 2160 120Hz | Honeycomb Alpha & Bravo | Logitech G Pro pedals | Tobii EyeTracker | 850W Thermaltake 80+ GOLD |
January 12, 20251 yr 3 hours ago, TomCYYZ said: Is this something for those that do not have cards to enable FG in MSFS2020 or MSFS2024? Not sure about that. What likes the most for me is the simplicity to use Lossless Scaling. Not sure also about the use of the MSFS_AutoFPS, never tried it before, and I suspect I don't need it. Look to what other users are saying about this utility: Edited January 12, 20251 yr by edpatino Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
January 12, 20251 yr 3 hours ago, CFIJose said: I'm kind of happy that this happened because they fixed the long load while checking for updates. Now the sim loads with my chosen add-ons in less than 3 minutes. Those one extra minutes add up. ^^^This! Regards, Joe Esposito
January 13, 20251 yr Yeah, a few days ago 2020 was out of sorts. Made me pretty angry. Today I went from DC to Oslo in the 777 and loved it. For the record, I never advance/accelerate/time compression in the sim. It was 9 hours of bliss. Cold/Dark, no jetway. GSX all loaded. Pilto2ATC clearance. Traffic running. 777 setup manually with airways. Start. Taxi clearance. RAAS not shutting up. Pilot2ATC warning me because traffic. etc. Took off. TCAS freaking out still. Felt bad for the AI MSFS Cessna that was attempting to take off after me. Cruise. Etc. ILS without a bounce. Taxi. Gate. Baboom. Love it. Then my 4 year old nearly pushed the power button mid cruise. That was close. While my plane is flying Im with family, hobbies, etc. Take off/landings are different. Edited January 13, 20251 yr by Sonosusto 7800+4090+64ram Just Flight RJ, 146 and F28, Piper Arrows ---A2A Aerostar and Comanche---Black Square Starship, Duke(s), TBM, Bonanza/BaronV2, KingAir---FSReborn FSR500---COWS Da42---FX P180, HJet & VJet---FlySimWare Chancellor and LearJet---FlightSimStudio EMB175 &P2006T---Fenix 320---PMDG DC6, 737(700+900), 777---C22J---Milviz Cessna 310 & Porter---SimWorksStudios Kodiak, PC12, Zenith & RV14---BigRadials Goose---IndiaFoxEcho MB3339+F35.
January 13, 20251 yr I flew 2 flights this weekend on 2020- FLL to LGA AND LGA to MCO and all went off fine. I did notice though that on arrival in LGA and MCO the small buildings appeared flatter than usual and were not crisp. That seemed new and it’s not my system as I’m fortunate to have a 4080 with top of the line Intel processor and 64gb of ram. I think this thread explains why as it seems like they might be throttling down the ortho a bit to compensate for the server issues. The sim still looked incredible but not as incredible as it did prior to 2024. Edited January 13, 20251 yr by jspilot
January 14, 20251 yr My flights have been great including after adding BATC w/ #5 traffic settings. But this morning out of KMCO rate is right at 29-30fps and even up at cruise to KMDW it's vacillating around 30fps. And GPU% is down to 38 whereas normally it would be around 60% or so. I don't yet know if one closes BATC how long it takes, if ever, for spawned traffic to disappear. With FSLTL's it's instant but not so with BATC's injector. Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
January 14, 20251 yr 3 minutes ago, Noel said: With FSLTL's it's instant but not so with BATC's injector My BATC traffic disappears as soon as I close it. Does traffic appear if you don't start BATC? FS2024 • PMDG 738, 77F • FSL A321 • A2A Comanche, Aerostar • BS Baron, Bonanza, Caravan Pro • JF Tomahawk • TAOG H500C BeyondATC • GSX Pro • ChasePlane & Flow Pro • TDS GTNXi • FSUIPC • AutoFPS • RealTurb 9800X3D B650E • ROG OC RTX 5090 • 64GB DDR5-6000 • VKB Gladiator, STECS, T-Rudder • Tobii 5 • ISP 1 Gbps
January 14, 20251 yr 2 minutes ago, flyingscampi said: My BATC traffic disappears as soon as I close it. Does traffic appear if you don't start BATC? Great, good to know. I just tried this taxiing out of KMCO when traffic behind me started bumping into my tail. So I turned traffic OFF in BATC, but did not close it, and the two planes behind me stayed there. But okay, closing the app ends traffic. No traffic w/o BATC as I have uninstalled FSLTL's injector and also have had MSFS' traffic off since using FSLTL. Thanks Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
January 14, 20251 yr On 1/11/2025 at 7:34 PM, CFIJose said: Offline mode is an option, but can you imagine the look outside the window? Default P3D/FSX.
Create an account or sign in to comment