February 14, 20251 yr Edited February 14, 20251 yr by Fielder 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 14, 20251 yr Author $215 each at Target chain store. They are 50" monitors. Edited February 14, 20251 yr by Fielder 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 14, 20251 yr Author At 13:20 he says for multiple screen msfs, make all the screens are the exact make and model or the colors will never match. He is also not using the built in multi screen setting from inside msfs. Because that is junk compared to Nvidia Surround with bezel correction, which is found in Nvidia Control panel. I also found both of those things to be absolutely true. (I was only using 2 screens because no room for 3). 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 14, 20251 yr 1 hour ago, Fielder said: At 13:20 he says for multiple screen msfs, make all the screens are the exact make and model or the colors will never match. He is also not using the built in multi screen setting from inside msfs. Because that is junk compared to Nvidia Surround with bezel correction, which is found in Nvidia Control panel. I also found both of those things to be absolutely true. (I was only using 2 screens because no room for 3). Hi, I run three 75" monitors and have the ability to set them up just fine in MSFS. Bezel correction can easily be adjusted for within the experimental sub page of MSFS. If you're using surround just for bezel correction in MSFS, it's not needed. Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck
February 14, 20251 yr Gee, 3 75" monitors! I don't have a room large enough for 18 feet of monitors. How far back to you sit? James M Driskell, Maj USMC (Ret)
February 14, 20251 yr Do people use these just dedicated for MSFS? Lot of us need dual use setups for work etc. SAR Pilot. Flight Sim'ing since the beginning.
February 14, 20251 yr 2 hours ago, Mike_CFII_MEL said: I run three 75" monitors You’re rocking 18 feet of monitors?! Pic or I don’t believe you. (I’m really hoping to be proven wrong, because I HAVE to see this).
February 14, 20251 yr 14 minutes ago, Bdub22 said: You’re rocking 18 feet of monitors?! Pic or I don’t believe you. (I’m really hoping to be proven wrong, because I HAVE to see this). 2 hours ago, jmdriskell said: Gee, 3 75" monitors! I don't have a room large enough for 18 feet of monitors. How far back to you sit? My nose is exactly five feet from the front screen. My flight deck running 3-75" UHDTVs from Samsung. Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck
February 14, 20251 yr 2 hours ago, Mike_CFII_MEL said: Hi, I run three 75" monitors and have the ability to set them up just fine in MSFS. Bezel correction can easily be adjusted for within the experimental sub page of MSFS. If you're using surround just for bezel correction in MSFS, it's not needed. MSFS multi monitor feature working perfectly here too. nVsurround stretches the outer sides ( fisheye effect ) and looks terrible… 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
February 14, 20251 yr 3 minutes ago, GSalden said: MSFS multi monitor feature working perfectly here too. nVsurround stretches the outer sides ( fisheye effect ) and looks terrible… Hi, Agreed, I don't have that stretched look using MS2020 for my exterior views as seen when using nvidia surround. Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck
February 14, 20251 yr Author Please, Mike, so much winning? We are tired of you always winning. Why not buy some bad hardware or make poor software decisions once in awhile. Like I usually do. 😁 Edited February 14, 20251 yr by Fielder 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 14, 20251 yr 49 minutes ago, Fielder said: Please, Mike, so much winning? We are tired of you always winning. Why not buy some bad hardware or make poor software decisions once in awhile. Like I usually do. 😁 All my bad decisions were made chasing frames from the 1980's with every new X chip to squeeze every last frame out of my sim. Wasted a ton of cash over the years for a few extra frames. Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck
February 15, 20251 yr How does one setup a 3 monitor setup on a PC? I have a 4090 and interested in going to a x3 55in tv set up. Do you use a HDMI splitter or extender? Confused on that part... Edited February 15, 20251 yr by B777ER Eric
February 15, 20251 yr 1 hour ago, B777ER said: How does one setup a 3 monitor setup on a PC? I have a 4090 and interested in going to a x3 55in tv set up. Do you use a HDMI splitter or extender? Confused on that part... Hi B777ER, I'm sure there is more than one way to run a multi-monitor setup, but this is how I did it on my end. I have my three exterior visuals plugged into my Asus tuf 4090 board via three HDMI to Display Port cables, they go right into the video card itself no splitter! I then setup the views via MS2020 Experimental sub page by adding the additional views and adjusting the settings so they line up correctly. Just make sure the cables you select can give you the resolution you're looking for when running your flight simulator. Edited February 15, 20251 yr by Mike_CFII_MEL Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck
Create an account or sign in to comment