Code Question

[Guest Claviateur]

Hi,Thanks to Arno's Bumpy tool I am trying to generate a SCA file to harden the surface of my photogrid. However there is one detail that I have in my original photogrid code and that is the TransformCall command that shifts the grid in the sea nad brings it back on land therefore avoiding autogen exclusion. So my quest now is to make the SCA generated by Bumpy includes the same extra code as the original photogrid so the hardening of the surface will match the shifting of the photogrid.I tried to copy the Variables section from my original SCA into the Bumpy one but while compiling it with FreeSC (FSC) and scasm too, I got errors. Here is the SCA generated by Bumpy and followed by the original one with the portion code of the photogrid :Header( 1 35:29:5.942381 32:09:6.057058 37:29:33.202709 33:29:14.797966 )LatRange( 32:09:6.057058 35:29:5.942381 )Area( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-6340 -6340-3170 -6340-3170 -9510)Jump( :st ):1SenseBorder( :2-6340 -6340-3170 -9510-6340 -9510)Jump( :st ):2Jump( : ):stSurfaceType( 0 12680 19020 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-3170 -63400 -63400 -9510)Jump( :st ):1SenseBorder( :2-3170 -63400 -9510-3170 -9510)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 19020 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-6340 -3170-3170 -3170-3170 -6340)Jump( :st ):1SenseBorder( :2-6340 -3170-3170 -6340-6340 -6340)Jump( :st ):2Jump( : ):stSurfaceType( 0 12680 12680 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-3170 -31700 -31700 -6340)Jump( :st ):1SenseBorder( :2-3170 -31700 -6340-3170 -6340)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 12680 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :10 -31703170 -31703170 -6340)Jump( :st ):1SenseBorder( :20 -31703170 -63400 -6340)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 12680 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-3170 00 00 -3170)Jump( :st ):1SenseBorder( :2-3170 00 -3170-3170 -3170)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 6340 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :10 03170 03170 -3170)Jump( :st ):1SenseBorder( :20 03170 -31700 -3170)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 6340 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-3170 31700 31700 0)Jump( :st ):1SenseBorder( :2-3170 31700 0-3170 0)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 6340 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :13170 31703170 00 0)Jump( :st ):1SenseBorder( :20 31703170 31700 0)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 6340 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :13170 31706340 31706340 0)Jump( :st ):1SenseBorder( :23170 31706340 03170 0)Jump( :st ):2Jump( : ):stSurfaceType( 0 12680 6340 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-6340 6340-3170 6340-3170 3170)Jump( :st ):1SenseBorder( :2-6340 6340-3170 3170-6340 3170)Jump( :st ):2Jump( : ):stSurfaceType( 0 12680 12680 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-3170 63400 63400 3170)Jump( :st ):1SenseBorder( :2-3170 63400 3170-3170 3170)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 12680 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :10 63403170 63403170 3170)Jump( :st ):1SenseBorder( :20 63403170 31700 3170)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 12680 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :13170 63406340 63406340 3170)Jump( :st ):1SenseBorder( :23170 63406340 31703170 3170)Jump( :st ):2Jump( : ):stSurfaceType( 0 12680 12680 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-6340 9510-3170 9510-3170 6340)Jump( :st ):1SenseBorder( :2-6340 9510-3170 6340-6340 6340)Jump( :st ):2Jump( : ):stSurfaceType( 0 12680 19020 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :1-3170 95100 95100 6340)Jump( :st ):1SenseBorder( :2-3170 95100 6340-3170 6340)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 19020 0 )EndAArea( b 33:49:2.241296 35:29:23.355961 20 ) RefPoint( rel : [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )SenseBorder( :10 95103170 95103170 6340)Jump( :st ):1SenseBorder( :20 95103170 63400 6340)Jump( :st ):2Jump( : ):stSurfaceType( 0 6340 19020 0 )EndA---Now here is the code from the original SCA containing the photogridArea( b 33:49:2.241296 35:29:23.355961 20 ) Uvar( $Lat0 33:49:2.241296 )Uvar( $Lon0 35:29:23.355961 ) Uvar( $Scale 0.304800 ) Uvar( $Lat1 33:49:2.241296 )Uvar( $Lon1 35:26:53.146721 ) Uvar( $DX [111120 / $Scale * cos($Lat1) * [$Lon0 - $Lon1] ] )Uvar( $DY [111120 / $Scale * [$Lat1 - $Lat0] ] ) RefPoint( rel :TagPhotoGrid [$Scale] [$Lat1] [$Lon1 + 0.00008] v1= 37040 v2= 6000 )TransformCall( :rot [$DX] 89 [$DY] 0 0 0 0 0 0 ) Jump( : ):rot LoadBitmap( 0 128 0 0 0 0 olba0000.bmp ) Points( 0 -6340 0 -9510 -3170 0 -9510 -3170 0 -6340 -6340 0 -6340 ) TexPoly( 0 32767 0 0 0 0 0 1 255 0 2 255 255 3 0 255 ) LoadBitmap( 0 128 0 0 0 0 olba0001.bmp ) Points( 0 -3170 0 -9510 erc...ThanksMichel

[arno 1]

Maybe not the solution you are looking for, but why not calculate the answers of the calculations (DX, DY, etc) and then just hardcode them into the commands? Then it should work.Arno

---

Member Netherlands 2000 Scenery Team[a href=http://home.wanadoo.nl/arno.gerretsen]http://home.wanadoo.nl/arno.gerretsen/banner.jpg[/a]

[Guest Claviateur]

Hi Arno,Thats very true, It might work this way, I will try thatThanks :)Michel