Jump to content
Sign in to follow this  
Guest HeavyFan

Aircraft dimensions for AFCAD gates

Recommended Posts

Guest mcleadbeater

Having installed realistic AI flightplans using Ian Webber's plans and Thomas' superb AI Traffic Mover, my next task is to change the radius of each of my AI aircraft using AITM to make them go to suitable gates. Does anyone have suggested sixes for the following aircraft:Default 737,747,777, MD83, Dash 8POSKY 762, 763, 764POSKY A332, A333Mike Stone A320, BAE146Many thanks- you might just save me a lot of time!RegardsMike

Share this post


Link to post
Share on other sites

I don't know the answer to your question, but I did things differently. I set each airline's aircraft radius to a different size, and then set the parking radius just bigger than that number. Now I have United planes parking at the United terminal, etc. For example, I set all United planes to have a radius of 23 m, and the parking at the United terminal just bigger than that.You could also refine this by having different radii for United wide bodies, medium bodies, and narrow bodies. I don't think it's necessary to assign each aircraft type a radius, since a given size group typically parks in a group of gates.Hope this helps,-- Tom GibsonCalifornia Classic Propliners: http://members.aol.com/tgfltsim/index.htmlAlcoHauler Locomotive Page: http://members.aol.com/alcohauler/home/alcohaul.htmlFreeflight Design Shop: http://www.freeflightdesign.com/ San Diego Model RR Museum: http://www.sdmodelrailroadm.com/Drop by! ___x_x_(")_x_x___

Share this post


Link to post
Share on other sites
Guest

Mike,Here are the radius settings I'm using for my current AI fleet. Obviously, the breaks in these catagories are a "grey' area and reasonable arguments can be made for including a given aircraft in a larger or smaller catagory. I've tried to keep the number of aircraft assigned to each size somewhat balanced so that I see as many different types as possible. Heavy Gate = 39-54m, aircraft radius = 46mB747B777A330A340MD11Medium Gate = 31-38m, aircraft radius = 34mA300B757B767L1011IL86Concorde ?Small Gate = 20-30m, aircraft radius = 25mA319A320A321B717B737MD80-90RJ85Dock GA = 19m, aircraft radius = 19m(I use these gates for commuter ac)ATRDash8CRJERJJetstream41GA Large = 14-18m, aircraft radius = 16mLear45 ?GA Medium = 10-13m, aircraft radius = 12mCaravanKing AirGA Small = 1-9m, aircraft radius = 7mBaronCessna172-182CherokeeMooney Bravo ?The radii for the Mooney, Lear45 and Concorde cannot be adjusted so they are marked with a ?-mark. I have seen these aircraft park at the gate sizes indicated, but I don't know if they will use others.

Share this post


Link to post
Share on other sites
Guest

Tom,Just curious. AITM uses meters for editing a/c radius, and AFCAD uses feet for gate radius. I like what you have done with each airline, however I don't know the difference between feet and meters.1) How do I determine the difference between the two programs so that only the particular radius of airlines fit in the particular gates?2) How much larger than the a/c did you assign gate's radius (1', 2', etc.) ?3) Also, what happens with the few a/c's that the radius cannot be edited in AITM? Can they be assigned certain gates or parking (perhaps by their assigned class) , or do they go to any open parking slot?Tracy

Share this post


Link to post
Share on other sites
Guest

I have a file called "acdimens" that has some aircraft dimensions for AFCAD. If you think this will be helpful let me know I will e-mail it to you, just give me your e-mail address and I will send it to you.

Share this post


Link to post
Share on other sites
Guest mcleadbeater

Thanks for your help. here's my e-mail address:mcleadbeater@yahoo.comKind regardsMike

Share this post


Link to post
Share on other sites
Guest

Mike, Sent you the aircraft dimensions file. Hope it helps. ENJOY! Kelvie

Share this post


Link to post
Share on other sites
Guest HeavyFan

Hey there! I was having problems to with the correct AFCAD Dimensions for diffrent planes! Could you please send me that file also if you don't mind! Thank's MIKE-:)>send it to>mdmustang550@hotmail.com

Share this post


Link to post
Share on other sites

1. & 2. 1 meter = 3.281 feet. I set the radius of the plane in meters in AITM, converted that to feet, and used the next larger even foot for the parking space in AFCAD. Example:United - set the radius of the planes at 23 meters. This converts to 75.46 feet. Set the parking spot at 76 feet.3. Luckily, I don't use any of those... :)Hope this helps,-- Tom GibsonCalifornia Classic Propliners: http://members.aol.com/tgfltsim/index.htmlAlcoHauler Locomotive Page: http://members.aol.com/alcohauler/home/alcohaul.htmlFreeflight Design Shop: http://www.freeflightdesign.com/ San Diego Model RR Museum: http://www.sdmodelrailroadm.com/Drop by! ___x_x_(")_x_x___

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...