Airbus aircraft speed keeps increasing

[jay907uk 21]

Hi,When I use the Airbus aircraft and rotate off the speed doesn't stop at V2+10 and just keeps climbing which means I get to the certain altitude before the end of the SID. But when I press the AP1 it sometimes climbs bit to quick anybody got any help or advice.1) With controlling the speed on take off. So it doesn't keep increasing?? 2) Not climbing quick when Autopilot is pressed. besides using V/SOr is it something I'm doing when programming the FMCRgdsJason Thompson

[scoob 18]

if you are flying, not the AP, you must continue to increase you pitch until you hold V2+10. the degree of pitch will depend on the aircraft weight. at ~1500' move the throttle to the CL gate and pitch down to increase speed and follow flap/slat retraction schedulewhen you are using the autopilot what speed is set in the FCU's speed window? (NOTE: you cannot turn on the AP until you have postive rate; but best practice is to wait until you are stable at V2+10 and above 200') you state, "Not climbing quick when Autopilot is pressed." meaning?* slow climb to cruise?* slow IAS to cruise?* low pitch so overshoots speed limitations (ie, V2+10, 250 under 10000')--