Build 2272 - Uploaded October 17, 2004

[jd 57]

This evening i uploaded, what i hope will be the final build of 3.1, build 2272.it should fix a problem that i didn't anticipate with fs patch 9.1you can download it from http://www.jdtllc.com/v3/rcv31.zipyou will need to download the followingfsuipc v3.4 http://www.schiratti.com/files/dowson/FSUIPC.zipif you use widefs, http://www.schiratti.com/files/dowson/WideFS.zipadvdisp 2.123 http://www.schiratti.com/files/dowson/AdvDisp.zipif you have already downloaded the required files for previous rc v3.1 builds, that's it, you're done.if this is the first v3.1 beta you have downloaded, you will need additional controller wavs, and a few updated wavs for all controllers and pilots. you will need the following (only if you haven't gotten them!):http://avsim.com/flightdeck/rcv3/11.ziphttp://avsim.com/flightdeck/rcv3/12.ziphttp://avsim.com/flightdeck/rcv3/RCWavUpdateFULL.zip

[drdickie 2]

For the first time ever, I have a problem running RC. After unzipping build 2272 and attempting to run, I got the message"mscomctl.ocx missing or bad registry", etc. I have always installed your previous updates flawlessly.Suggestions?Thanks.

[drdickie 2]

I found the answer at:www.majorgeeks.com/faqshow.php?id=8Need to dowload and re-register the file. Never happened before. Maybe it has something to do with the Windows XP SP2 update.Thanks.

[rpowers 5]

There are no instructions and I don't remeber where I installed the last update.Where does this exe file gp?Thank you,Ron Powers

[Guest RickT]

Unzip rcv31.exe into your Radar Contact folder c:program filesrcv30.Don't forget to update your RCv3 short so it points to rcv31.exe.

[rpowers 5]

Just the rcv31.exe?or the rest of the files too?I did the rcv31.exe but not the others.Thanks,Ron

[jd 57]

the post says:you will need to download the followingfsuipc v3.4 http://www.schiratti.com/files/dowson/FSUIPC.zipif you use widefs, http://www.schiratti.com/files/dowson/WideFS.zipadvdisp 2.123 http://www.schiratti.com/files/dowson/AdvDisp.zipif you have already downloaded the required files for previous rc v3.1 builds, that's it, you're done.if this is the first v3.1 beta you have downloaded, you will need additional controller wavs, and a few updated wavs for all controllers and pilots. you will need the following (only if you haven't gotten them!):http://avsim.com/flightdeck/rcv3/11.ziphttp://avsim.com/flightdeck/rcv3/12.ziphttp://avsim.com/flightdeck/rcv3/RCWavUpdateFULL.zip

[rpowers 5]

I have those installed.Do I need to install these files from the 2272 zip?a2.txt, aircraft.dat,airspace.csv,rcv3.dat & runways.csv.Thanks for the support.Ron

[Guest RickT]

All files within the rcv31.zip file need to be installed.

[rpowers 5]

Thank you,Ron

[rpowers 5]

I installed all the files overwriting the old ones even though all but the exe one had the same dates.Now my fs200x.pln button does not work.When I start rc31 I see it is ver 2272.The only thing I get is saved flights and only 1.KNBA to Fort Meyers Lear 45RC jet.It's like it doesn't find my FS.What do I do now?Thanks,Ron If I go to rc0 it loads.I also have a RCv3b.exe I think,can't remember exactly,I'm at my office.Ron

[jd 57]

is there a button that says register at the bottom? does it show your product id, and a place to put your key? if so, then you need to send the product id (including the - if there is one) to register@jdtllc.com and he will send you a new key, which you will have to copy and paste into the key box

[rpowers 5]

Thank you,I do believe that may be the problem.I remember seeing that but didn't understand why I would have to reregister.Will do so tonight.Thanks,Ron

[rpowers 5]

You sent my key to old email.New email is (powers.g@worldnet.att.net) no ()'s.I sent this info to you at register@jdtllc.com.Please send or ccontact me.Thanks,Ron Powers

[Guest RickT]

Are you running some sort of anti-spam software? I have replied to each of your emails this evening with a new key. Please make sure my email address (rick@jdtllc.com) is not on that list.If you are not running anti-spam software please check with your ISP. I got this back from your ISP when I asked for delivery confirmation:Reporting-MTA: dns; worldnet.att.netFinal_Recipient: rfc822;powers.g@worldnet.att.netAction: deliveredStatus: 2.0.0Received: from mailsite1.mmiii.swh.bellsouth.net ([65.83.226.5]) by worldnet.att.net (mtiwmxc12) with ESMTP id <20041102235217012008safde>; Tue, 2 Nov 2004 23:52:17 +0000X-Originating-IP: [65.83.226.5]Received: from ricksmachine (unverified [24.24.116.32]) by mailsite3.mmiii.swh.bellsouth.net (Rockliffe SMTPRA 6.1.16) with ESMTP id for ; Tue, 2 Nov 2004 18:55:23 -0500Return-Receipt-To: "Rick Thompson" From: "Rick Thompson" To: Subject: FW: RCv3 Key RequestDate: Tue, 2 Nov 2004 17:52:12 -0600Message-ID: MIME-Version: 1.0Content-Type: multipart/alternative; boundary="----=_NextPart_000_003C_01C4C104.AECE4480"X-Priority: 1 (Highest)X-MSMail-Priority: HighX-Mailer: Microsoft Office Outlook, Build 11.0.6353X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180Thread-Index: AcTBLdLy6qRIt1hFSNG9s4ErdqZS/AAAPsXQAABretAAAZFHsA==Importance: HighDisposition-Notification-To: "Rick Thompson" My emails are getting to your ISP! Your ISP will have to investigate why they are not getting to you.Let us know if you continue to have problems.