>Hi,>><>>>Okay. That changes your earlier message that the problem only>exists when RC is running. No matter - it eliminates RC and>AdvDisp from the >problem.>>It sounds like a driver issue. Please advise if you have>anti-aliasing set inside FS2002 or externally in your Catalyst>Control panel.>>I notice you have some non-standard controls on the 737 panel.>Are those controlled by another module? If so try the default>737 panel or another default aircraft and see if the problem>goes away.>>It's all a proces of trial and elimination.>>Cheers,I have anti-aliasing externally in my Catalyst Control Panel. The non-standard controls are for FS Navigator for the default 737 which I have been using for a quite awhile.If I switch to window mode and back to full screen the problem goes away. Something changed recently other than drivers as I do not remember having to switch modes to refresh the display.Any ideas?

Hi,<>That's fine.<>Okay, that's fine.<>Now we're getting somewhere. It could be related to refresh rate on your monitor. Can you tell me what resolution and refresh rate you have set for Windows? Then open your FS9.CFG and find the DISPLAY section. You'll have three lines that look like this...[DISPLAY.Device.RADEON 9800 PRO (Omega 2.5.58).0]Mode=1280x1024x32TriLinear=1RenderToTexture=0Can you post the details from your FS9.CFG. You can find it here...C:Documents and SettingsYour NameApplication DataMicrosoftFS9You'll need to show hidden files and folders in Explorer.For now, please stay in Windowed Mode. I think you'll find the problem goes away in that mode.Cheers,

Sorry, my mistake. I forgot you're running FS2002.Can you still provide the resolution, colour depth and refresh rate you have set for Windows and also the resolution and colour depth you have chosen in FS2002 Display Settings.Thanks,

>Hi,>><Panel.>>>>That's fine.>><default 737 which I have been using for a quite awhile.>>>>Okay, that's fine.>><problem goes away. Something changed recently other than>drivers as I do not remember having to switch modes to refresh>the display.>>>>Now we're getting somewhere. It could be related to refresh>rate on your monitor. Can you tell me what resolution and>refresh rate you have set for Windows? Then open your FS9.CFG>and find the DISPLAY section. You'll have three lines that>look like this...>>[DISPLAY.Device.RADEON 9800 PRO (Omega 2.5.58).0]>Mode=1280x1024x32>TriLinear=1>RenderToTexture=0>>Can you post the details from your FS9.CFG. You can find it>here...>>C:Documents and SettingsYour NameApplication>DataMicrosoftFS9>>You'll need to show hidden files and folders in Explorer.>>For now, please stay in Windowed Mode. I think you'll find the>problem goes away in that mode.>>Cheers,I have the problem with FS2002 or FS8.Anyway, pasted below is the DISPLAY settings from FS2002.[DISPLAY]Device=RADEON 9700 PROMode=1280x1024x16UPPER_FRAMERATE_LIMIT=30TnL=1

>Hi,>><Panel.>>>>That's fine.>><default 737 which I have been using for a quite awhile.>>>>Okay, that's fine.>><problem goes away. Something changed recently other than>drivers as I do not remember having to switch modes to refresh>the display.>>>>Now we're getting somewhere. It could be related to refresh>rate on your monitor. Can you tell me what resolution and>refresh rate you have set for Windows? Then open your FS9.CFG>and find the DISPLAY section. You'll have three lines that>look like this...>>[DISPLAY.Device.RADEON 9800 PRO (Omega 2.5.58).0]>Mode=1280x1024x32>TriLinear=1>RenderToTexture=0>>Can you post the details from your FS9.CFG. You can find it>here...>>C:Documents and SettingsYour NameApplication>DataMicrosoftFS9>>You'll need to show hidden files and folders in Explorer.>>For now, please stay in Windowed Mode. I think you'll find the>problem goes away in that mode.>>Cheers,My refresh rate was set to 60hz! So I set it back to 75hz and will do further testing.

<>Yes, I spotted my mistake.You're running in 16-bit colour in FS. What are your Windows settings? I need resolution, colour depth and refresh rate please.Cheers,

><>Anyway, pasted below is the DISPLAY settings from FS2002.>>>Device=RADEON 9700 PRO>Mode=1280x1024x16>UPPER_FRAMERATE_LIMIT=30>TnL=1>>>>Yes, I spotted my mistake.>>You're running in 16-bit colour in FS. What are your Windows>settings? I need resolution, colour depth and refresh rate>please.>>Cheers,The refresh rate was the culprit.Thanks for your help.

Hi,<>Nice simple solution :-) Thanks for letting me know.Cheers,