I really enjoyed my first attempt at this program but have a few questionswhen requesting atis wx brfing in rc4 I get both fs9 atis and rc4, I dont want to turn off atc completely in fs9 as it is going to be required given that there is no ground instructionsDoes atc in fs9 mirror what is going on in rc4. I dont see any taxi info for example. so will rc4 understand where one is pursuant to instructions received from ground in rc4Does rc4 recognize aircraft in ai ( airnav fs live??) Note I tried runing all of my add-ins at the same,,fs passnegerairnav fs livefdc liveavs weatherrc4I know that is allot of stuff but when doing a short flight ifr from windsor to cleveland using the king 350 I almost got it all working, everything was doing just fine until takeoff , then it all froze...I suppose it was just too much at the same time,,,,, Lastly , is rc4 picking up my actual AI traffic or is it generated via the program random. If i keep the background fs atc open the ai traffic seems to be recognized..

>I really enjoyed my first attempt at this program but have a>few questions>>when requesting atis wx brfing in rc4 I get both fs9 atis and>rc4, I dont want to turn off atc completely in fs9 as it is>going to be required given that there is no ground>instructionssince we use the same freq for realism, this is going to happen. i think john burgess is a big proponent of putting fs9 atc on com2. turn off com2 until you want to listen to fs9 atc>>Does atc in fs9 mirror what is going on in rc4. I dont see any>taxi info for example. so will rc4 understand where one is>pursuant to instructions received from ground in rc4not sure what your question is. i know what all the ground ai are doing, and am "chatting" with them. but if you aren't on ground frequency, you won't hear the ground chatter to them>>Does rc4 recognize aircraft in ai ( airnav fs live??) if i remember this correctly, airnav fs live takes a snapshot of the world traffic, builds a traffic bgl file, and loads it into fs9.if the ai are in fs9, i'll see them. let me rephrase, if fsuipc sees the ai, i see them. use the trafficlook program that comes with fsuipc, and you'll see what i see>>Note I tried runing all of my add-ins at the same,,>>fs passneger>airnav fs live>fdc live>avs weather>rc4>>I know that is allot of stuff but when doing a short flight>ifr from windsor to cleveland using the king 350 I almost got>it all working, everything was doing just fine until takeoff ,>then it all froze...I suppose it was just too much at the same>time,,,,, there is a fix for fdc, which i think was what happened to you. did you not get the google group message i sent out last night about the new fsuipc and new fdc? if not, send [email protected] and be added to the google group for important breaking information like that.>>Lastly , is rc4 picking up my actual AI traffic or is it>generated via the program random. If i keep the background fs>atc open the ai traffic seems to be recognized.. actual ai. no one creates ai.jd>>>>>>>>>>>>

>>I really enjoyed my first attempt at this program but have>a>>few questions>>>>when requesting atis wx brfing in rc4 I get both fs9 atis>and>>rc4, I dont want to turn off atc completely in fs9 as it is>>going to be required given that there is no ground>>instructions>>since we use the same freq for realism, this is going to>happen. i think john burgess is a big proponent of putting fs9>atc on com2. turn off com2 until you want to listen to fs9>atc>>OK BUT WHAT I WAS WONDERING WAS IS THE ATIS FROM RC4 GOING TO BE THE SAME AS FS9, IS IT READING THE SAME INFO FROM MY 3RD PARTY WX GENERATOR, MY WX PROGRAM SAYS TO CLEAR AND TURN OFF WX IN FSUIPC..?>>>>Does atc in fs9 mirror what is going on in rc4. I dont see>any>>taxi info for example. so will rc4 understand where one is>>pursuant to instructions received from ground in rc4>>not sure what your question is. i know what all the ground ai>are doing, and am "chatting" with them. but if you aren't on>ground frequency, you won't hear the ground chatter to them>>>SORRY I WAS NOT CLEAR. LET ME TRY AGAIN. IF I ASK FOR TAXI TO THE ACTIVE IN RC4, WOULD IT BE THE SAME AS I WOULD GET IF REQUESTED IN FS9 , BECAUSE RC4 DOES NOT GIVE INSTRUCTIONS TO THE ACTIVE , SO, LETS SAY I REQUEST DIRECTIONS FROM FS9 , FOLLOW THOSE INSTRUCTIONS TO THE ACTIVE AND HOLD SHORT. WOULD RC4 RECOGNIZE MY LOCATION AT THE RUNWAY IT PROPOSES ( CONSISTENT WITH MY IFR CLEARANCE) AND WOULD IT BE CONSISTENT WITH TAXI INSTRUCTIONS IN RC4 ( A MOUTHFUL, SORRY THATS ABOUT AS CLEAR AS MUD!)>>Does rc4 recognize aircraft in ai ( airnav fs live??) >>if i remember this correctly, airnav fs live takes a snapshot>of the world traffic, builds a traffic bgl file, and loads it>into fs9.( THATS CORRECT)>>if the ai are in fs9, i'll see them. let me rephrase, if>fsuipc sees the ai, i see them. use the trafficlook program>that comes with fsuipc, and you'll see what i seeDO I NEED THE FULLY REGISTERED PROGRAM TO GET TRAFFIC LOOK IN FSUIPC>>>>>>Note I tried runing all of my add-ins at the same,,>>>>fs passneger>>airnav fs live>>fdc live>>avs weather>>rc4>>>>I know that is allot of stuff but when doing a short flight>>ifr from windsor to cleveland using the king 350 I almost>got>>it all working, everything was doing just fine until takeoff>,>>then it all froze...I suppose it was just too much at the>same>>time,,,,, >>there is a fix for fdc, which i think was what happened to>you. did you not get the google group message i sent out last>night about the new fsuipc and new fdc? if not, send>[email protected] and be added to the google group for important>breaking information like that.>>I DID NOT SEE THE GOOGLE GROUP MESSAGE AND FIX CAN U RESEND. WHAT IS THE LATEST FSUIPC AND DO I REQUIRE THE FULL VERSION>>>>Lastly , is rc4 picking up my actual AI traffic or is it>>generated via the program random. If i keep the background>fs>>atc open the ai traffic seems to be recognized.. >>>actual ai. no one creates ai.>>>jd>>>>>>>>>>>>>>>>>>>>>>>>>

Hi There,Which weather generator is this? It is probably telling youuse fsuipc to clear all weather before using the weather generator. Do all of this before you load RC.RC will tell you to taxi to a runway and hold short but won't tell you which route to take.. On the way you will be told to contact or monitor tower. Tower will know when you are holding short.Trafficlook should work with the unregistered fsuipc I think.Which version of FDC are you using. Check the FDC forum for details of the updates you need.All the best,John

>Hi There, THANK YOU FOR ALL OF THIS ASSISTANCE!!!!>>Which weather generator is this? It is probably telling youuse>fsuipc to clear all weather before using the weather>generator. Do all of this before you load RC./MY WX GENERATOR IS ACTIVE SKY i ALSO HAVE WEATHER MAKER 4,, iM NOT SURE WHAT WILL WORK BETTER WITH RC4. ACTUALLY THE ACTIVE SKY INSTRUCTIONS INDICATE THAT I SHOULD HIT THE TURN OFF WEATHER BUTTON IN FSUIPC VS WEATHER MAKER WHICH SAYS CLEAR ALL WEATHER.I LIKE TO FLY WITH REAL WEATHER THAT CHANGES SO I DONT REALLY SET UP THE WEATHER OTHER THAN TO GET UPDATES AT A PRESET INTERVAL...>>RC will tell you to taxi to a runway and hold short but won't>tell you which route to take.. On the way you will be told to>contact or monitor tower. Tower will know when you are holding>short.SO IF I GET INSTRUCTIONS FROM GROUND IN FS9 AND FOLLOW THE TAXI INSTRUCTIONS TO THE RUNWAY, SHOULD RC4 KNOW WHERE THE AIRCRAFT IS GOING IN OTHER WORDS ARE THEY COORDINATED>>Trafficlook should work with the unregistered fsuipc I think.WHERE IS THE TAB FOR TRAFFICLOOK IN FSUIPC>>Which version of FDC are you using. Check the FDC forum for>details of the updates you need.i AM USING FDC LIVE COCKPIT>>All the best,>MERRY XMAS TO ALL>John

Hi there,Active sky should work fine. I've used most of the versions with RC during testing with no problems. I've never used weather maker.Generally you wouldn't bother with FSATC at all. RC doesn't really know what fsatc is doing, but if ai are active RC will choose one of the runways they are using.If you wish you can then request any runway you want from the RC ground controller.Trafficlook is a seperate program. You'll find trafficlook.exe in the fsuipc downloaded zip file.With FDC live cockpit make sure you have upgraded to v3.1All the best,John