Jump to content

Sign in to follow this  
Guest cirurgiao

About TRANSITION LEVEL & TRANSITION ALTITUDE

Recommended Posts

Guest cirurgiao

Hi, as a newcomer to FS9 & Radar Contact v4, I'm learning something new. I really don't understand the significance and what it implies of transition altitude & level.I've read the rcv4 manual but don't get it.Thanks for any helpcirurgiao

Share this post


Link to post
Share on other sites

Hi,With respect if you don't understand the manual then I don't think you will understand how I explain it.Being new to both programs presents you will a huge learning curve. You might be better getting toi grips with the basic principles of flying an aircraft and navigating before getting involved with RC4.I'm sure you understand parts of the manual so if you can post specific questions I'll do my best to explain or point you to the relevant bit in the manual.To start with what airports are you flying from and to? The FAA area (the US) has totally different rules to non-FAA (most of the rest of the world).Help us to help you :-)Cheers,


Ray (Cheshire, England).
System: P3D v5.2 & v3.4, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites
Guest cirurgiao

Thanks for answering so soon. I have been flying inside the USA and sometimes in Europe. What I don't understand is this:I planned a flight from Meigs to Minneapolis with a Dreamfleet Cessna 310 (my favorite plane). I understand almost every comm that rcv4 controller give in-flight. I need to know if a transition level & altitude will affect my flight.Another observation: very interesting those add-ons in the end of your message. How do you get it if its possible to explain?

Share this post


Link to post
Share on other sites
Guest 102301636

hey,lets see if I can explain in plain english...It's my understanding that in the States transition alititude is FL180 (18,000ft) (someone correct me if I'm wrong). I am in Europe, here each airport has it's own transition alititude...this can be picked up on the airports ATIS along with it's weather.When you are above the transition alititude you must set your altimeter setting to the standard QNH (29.92 inches of mercury in US, 1013 HPa or millebars everywhere else).this ensures that every aircraft above the transition alititude is reading their correct altitude. Altitude is based on air pressure and the 29.92 setting makes sure that every aircraft is on the same setting thus ensuring they are keeping to the alititude specified in their flight plan or by ATC at the time. (play around with your altimeter setting in FS and watch how your altitude varies).When you are below the transition altitude you are normally in a control zone of some sort (ie under the control of the airport in question, therefore you set your altimeter to the current QNH setting to give you your correct reading ASL (above sea level), again this ensures that all aircraft below the transition altitude in the control zone have the correct readings on their altitude.This is neccessary because say you were doing an approach to an airport, you would know the altitude of the runway threshold in question, when you set your altimeter to the QNH below transition altitude this ensure that your altimeter will read this altitude when you are at the runways threshold, vital for any sort of IAP approach.Sorry I got kinda technical towards the end but hopefully you get the drift...drift, now there's a whole new discussion right there....Alan

Share this post


Link to post
Share on other sites

Hi Alan,Thanks for explaining that in layman's terms. Just a couple of small corrections...<>Transition Altitudes would always be expressed as an altitude and not a flight level. So 18,000ft is correct but FL180 isn't ;-)<>You can't be below the Transition Altitude - only below the Transition Level.For the poster's benefit benefit the vital command to listen out for is "Altimeter Check". When you hear that when climbing set the altimeter to standard pressure - 29.92 or 1013.2. When you hear it during the descent switch to QNH.Cheers,


Ray (Cheshire, England).
System: P3D v5.2 & v3.4, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites

Hi,Hopefully Alan's reply will have helped your understanding of Transition Altitudes and Transition Levels.I think you were referring to my signature. You can change yours by selecting User Menu / Edit Your Profile in the main AvSim Forum area.Cheers,


Ray (Cheshire, England).
System: P3D v5.2 & v3.4, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites
Guest hlm65

Ray,you wrote: "You can't be below the Transition Altitude - only below the Transition Level."But...when you're climbing out from an airport, you're always below transition altitude (your altimeter is set at the local QNH) till you pass thru that and change the altimeter to the standard.Regards

Share this post


Link to post
Share on other sites

Hi Enrico,You're quite right. My apologies to Alan. I believe it's called a brain f*rt :-(Cheers,


Ray (Cheshire, England).
System: P3D v5.2 & v3.4, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites
Guest hlm65

Hi Ray,I think you just did a very minor mistake...Regards

Share this post


Link to post
Share on other sites

Hi,As far as I know it's quite simple:During CLIMB (after take off) transition ALTITUDE is used. When passing this altitude, you set your altimeter to QNE (1013/29.92).Above this, altitudes are refered to in FL (Flight Level) instead of FEET.During DESCEND the transition LEVEL is used. Above the transition level your altimeter was set to 1013/29.92 (QNE), when descending through the transition level, you set your altimeter (back) to local pressure (QNH). Below this, altitudes are refered to in FEET, instead of FL.


Location: Vleuten, The Netherlands, 15.7dme EHAM
System: P3D V4 - 80386 DX2 - 4MB RAM - 3dfx Voodoo5 - Windows 3.11

Share this post


Link to post
Share on other sites
Guest astemland

but, I think its another rules regarding FL and feet in the USA.correct me if I am wrong ;)-Anders-

Share this post


Link to post
Share on other sites
Guest cirurgiao

Hi everybody.I'd like to say thanks to everyone of you who made my dumb question an important one. I've learned a lot about RC community. I hope my next question didn't seem so dumb.

Share this post


Link to post
Share on other sites
Guest cirurgiao

Thank you. This graphic was stupenduos.Eduardo

Share this post


Link to post
Share on other sites

It's often said that the only dumb question is the one that isn't asked.Enjoy your flights with your new-found knowledge! :-beerchugCheers,


Ray (Cheshire, England).
System: P3D v5.2 & v3.4, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    48%
    $12,200.00 of $25,000.00 Donate Now
×
×
  • Create New...