All Activity

This stream auto-updates     

  1. Past hour
  2. dal330200

    Thopat

    Just wait until 4/30 when Rex environment force comes out, and chances are that you won't need PTA or Tomato for much of anything anymore- except maybe aircraft lighting. Check out the site and see how this will be a game-changer for those of us who like to tweak shaders.
  3. RXP

    VCALC Alert

    Hi, can you please detail what alert is this? Is there a sound alert supposed to be audible too? You might want to cross check this in the Garmin GTN Pilot's Guide.
  4. w6kd

    Advice needed with trouble shooting

    If you're not already doing it this way, try using a hardware frame rate limiter--either your display and GPU set to 30Hz refresh rate (if the display will support that), or the RivaTuner RTSS set to Scanline Sync X/2 with 60Hz refresh rate. Hardware (external) frame rate limiting works much better than the internal software limiter for freeing up the CPU from workload beyond what's required to produce the target 30 FPS frame rate. I also use the Dynamic FFTF utility set to 0.4 at altitudes above 5000 ft to give my CPU a bigger slice of the processing time pie for scenery loading. 0.33 is the default, and if you set 0.4 statically in the config, it can cause issues on/near the ground when the CPU is getting hammered with airport scenery and AI workload. So I have FFTF Dynamic set to range from 0.01 on the ground with an increase to 0.4 at/above 5000 ft AGL. It helps keep the CPU gainfully employed at altitude when it has a lot more headroom available for scenery loading. w/r/t your hardware changes, reverting from the 9700K back to your 8600K did not undo the driver changes that were made when the 9700K was installed...it overwrote them (again). So you're not necessarily back to where you started in software as a result of going back to where you started in hardware. That said, it's definitely not clear that this is a hardware issue now...before it appeared that this behavior change was incident to your hardware upgrade, now it turns out that your software platform changed as well. Regards
  5. Hi, Can you please let me know the content of the rxpGtnSim.dll.log file?
  6. Great video, thanks for posting
  7. Noel

    P3D multicore usage anomoly

    Everyone here fully understands the screen has to repaint IN THE CURRENT ITERATION when you change scenery sliders. FWIW, that is not the case w/ some or all of the lighting sliders. It's certainly conceivable if LM decided something like this was very desirable code could be reengineered to insure CPU/GPU utilization were considered in what is rendered, and turn over prioritization according to user-selected criteria. The main unknown by anyone here is what that would cost to do. SteveW: "I think I understand what you want. You would need to perhaps set a scale of preferences, say you might put clouds at the top of the list as most important. Those items in the list are diminished in detail to enable performance to continue uninterrupted. It's do-able as I said, just awkward and costly, maybe not." READ: he admits he really doesn't know how doable and at what cost, but at least he understands the challenge. GSalden: "At this moment adding or lowering AG in realtime is not even possible" Noel: "This has been my concern and why I say it is LM who would need to develop this feature/utility...." Noel: "All of you folks out there including SteveW and itsjase: do you understand why something like this is out of the question? Is tweaked ESP engine simply unable for technical reasons we don't appreciate?" NO ONE answered this except SteveW gave an honest response which proves at least he understood the question and did not come back w/ the judgmental polarizing knee-jerk reaction you did.
  8. BamaKevin

    Calling all Bush Pilots

    I am curious to which ATC Addon everyone is using? I am currently using ProAtc and I am struggling to get it to do what I was hoping for in GA aircraft. Guess it’s more geared for Airlines.
  9. Hi, AFAIK the GTN is not capable of coupling VNAV altitude. I couldn't find any contrary mentions in the Garmin GTN Pilot's Guide either, thus I guess this is normal. Any real life GTN pilot might probably shed some light to this?
  10. Here is another video with a description of how to set up and use the Reality XP GTN in native X-Plane 11 VR from Russ Barlow:
  11. ckyliu

    Fast and easy to fly GA Plane

    JustFlight do some good in-house GA stuff. The TB-20 is quick but their version is prone to extreme left roll upon rotation and also very difficult to lose airspeed in. No idea if that's accurate or not as they never answered my support ticket. Like others have said, for quick and cheap grills, Carenado or Alabeo work well. I feel you have received bad advice with recommendations for A2A, they are not jump-in and easy to fly for half an hour without prior study. They are great products, but they need time invested.
  12. tttocs

    Please post the resolution

    I completely agree. It's especially frustrating when people take the time to try to assist and the OP is never heard from again. Scott
  13. page 37-39 of the manual
  14. Hollywood

    Native P3D v4.5 Vr - 'Wobbly' looking image?

    VR is a performance sucker. Thats what I learned. Still, after more than 12 month with my Rift I will never go back to TIR 😉 Every release of p3d, VR is getting better. One thing I disagree, is with disabling all features that would make it nice. Some people say, AA is useless in VR. I disagree. The aicraft still looks better having it turned on. Maybe not 8xSSAA. But a bit more conservative will help on fps. Autogen. I mean, what is a forrest worth if the forrest is not dense or the city has no buildings... For some reason you are in the sim and VR improves the sense of real flying. Why to turn off the gimmicks then? I tell you my 2 cents. Plan for VR don't run into it because it is just nice. I did rush into it and ended up in changing pieces of hardware afterwards. Forced to it. Lessons learned. Anything below a GTX 1080 8GB+ is nonsense for Flightsim. It works for some other games on a 1070 too. Not DCS, not XP11, nor P3D 32GB Ram. You will have this many processes running for VR, that suck your memory. Better have some spare. i7-7700k, thats what I am on. It is low end. I am still waiting for upgrading Mind the table and the screen. You will have to move more distant otherwise you will score a hit with your head or your VR hands on the table or like me on the monitor when leaning forward 😉 All your hardware panels become useless. How much did you invest? Sell it. You will no longer need it - except for P3D, hurray, you ca keep pedals, warthog stick and throttle but consider some move with those here -> https://www.youtube.com/watch?v=kN83TQoI-bk Harness - god yesss!!! Forget only once that you cannot hold to the side of your F5 cockpit while leaning out. You will be resting on the floor. This was my warm welcome to DCS ... P3D uses mouse to control buttons and switches. Have a little pad on the side of your chair ... Last, Oculus Rift needs 3 USB3 (blue) ports and one HDMI port. Headset and Tracking devices should not be on the same USB3 Host controller. I had bandwidth disconnects having all on same hub. XP11, DCS are way more sophisticated in terms of VR. In DCS you can control the knobs, switches and buttons by hand controller. In XP11 you can even fly the plane fully on VR controllers, except pedals, of course.
  15. jimcarrel

    Please post the resolution

    I think it is part of the "me, me and me" complex. I've got mine, you go get yours. More to the point, readers of the OP thread are not even considered or part of the thinking process of the person posting.
  16. Anyway, here is link for more explanations: https://forum.flightgear.org/viewtopic.php?t=16948
  17. astro_liam

    GTN 750

    If using the F1 GTN then just run the F1GTN750AT45.exe
  18. I love thopat's preset but it is badly outdated. I have posted on their discussion board on their website, as have others, and they are no longer responding. Does anyone know if they are still developing this for the newer versions of P3d 4 and PTA tweak assistant?
  19. Bobsk8

    Please post the resolution

    It's just rude or stupid, I can't figure out which.
  20. Today
  21. cyyzrwy24

    Very bad FPS (0,8-1,7)

    Sadly...that makes sense to me as well....Unfortunately I have at 0 as well and removed UTL....was killing my FPS, not as bad, but bad enough.
  22. cyyzrwy24

    Please post the resolution

    And...in result, when you ask same question again, because you couldn't find under "resolved", you get answer like -".... read the thread, it was answered...(?!)".... Ok....
  23. SunDevil56

    GSX update on the way

    I agree completely. If you haven't bought GSX L2, you don't know what you are missing. It's an extremely powerful and versatile tool, one that I personally would consider a "must have" add on, and well worth the reasonable cost.
  24. jovejunior

    GTN 650/750

    Using the PMDG GNS 430 the aircraft flies OK. Following a VOR CRS, and following the GPS track. But when I use the GTN GPS, I have that issue reported before.
  25. Axis3600

    30hz vs 60hz

    So I tried For my part I have the same fluidity with RTSS and the option Scanline X / 2 (60 Hz) that block FPS on 30 in P3D And suddenly I do not have the AG that disappears
  26. Thanks.....lol...I figured, I expected somewhere else, bu found it. Thank you
  27. jovejunior

    GTN 650/750

    Thank your for your help! But, actually, I only enter my FPL add wpt by wpt on GTN...I never loaded it entire before.
  1. Load more activity