ShezA
Members-
Content Count
1,517 -
Donations
$50.00 -
Joined
-
Last visited
Content Type
Profiles
Forums
AVSIM
Media Demo
Downloads
Gallery
Blogs
Forms
Everything posted by ShezA
-
I have two profiles specifically for default and P3D with the only parameter changing being the CPU affinity. For Default profile all processes are on full hyperthreaded CPU affinity (cores 0-11). For P3D I have a profile which pushes all non-P3D processes to cores 1,3,5,7,9,11 and puts P3D on 0,2,4,6,8,10. The result is as below. https://ibb.co/nc21bMv
-
That is why I brought it up and Bruce also wondered why it is not used. This was an older tweak and I guess has not been discussed much recently. It is widely known in many gaming forums.
-
As with all tweaks it will be setup specific. Try it out and let us know. Works well for us, that is why we highlighted it. 🙂 But like others I did not like the 30Hz mouse issues so found this ideal for me.
-
Just install the latest MSI Afterburner and it is auto-installed. I still use the venerable AlacrityPC to shut down processes and programs as per profile and the MSI AB / RTSS start with the profile. For the display of parameters on screen as per my screenshot above you will need to use AB.
-
A lot has been written on the core balancing. I have always used Process Lasso and it perfectly balances the load across whatever cores I assign to P3D. Right now I am using HT on (it helps in overall PC fluidity for other programs) and in PL I use HT disabled specifically assigned only for P3D. So for my CPU PL assigns physical cores 0,2,4,6,8,10 to P3D and 1,3,5,7,9,11 to every other process. I don't use the Affinity Mask tweak.
-
OK for me it appears -2 is better. Will keep testing.
-
What is the scanline sync setting you are using? -1?
-
Try the frame rate limiter in the MSI Afterburner/ Riva Tuner SS. Works really well with the unlimited setting. RTSS/Afterburner also has some other great features where you can monitor key GPU/CPU parameters on screen. https://ibb.co/ZmpjZp9 See top right.
-
Perfectly described. My only grouse with LNM is that it has grown to become a monster with so much functionality that it becomes unwieldy to run at times. So I end up just using it for seeing where the parking is on default airports. For VFR flight planning I just use navigraph charts desktop and my GTN750 in-sim. But that is just me...
-
There is really nothing I can say about it right now. Check the latest DTW beta. If there is no fundamental change in the way V5 is rendering scenery it should work. I am happily snuggled in with my 4.5 so cannot test...🙂
-
There is a file that needs to be deleted. Please search this forum for the solution.
-
Hi Gerard, I wrote this elsewhere for 4.5 but may work for 5. For V4.5: I have been running some experiments on P3DV4.5 and Process Lasso. My problem is heat on GPU/CPU. I was on HT off for a time because of this. I recently went back to HT ON and I found that my win10 performance improved significantly. I then went back to PL and set up a profile which when turned on moved P3D to HT OFF (it is in the CPU affinity drop down). I moved all other processes to the other cores. Result: Lower temps and same performance and better Win10 performance. Very satisfied!
-
V4.5: I have been running some experiments on P3DV45 and Process Lasso. My problem is heat on GPU/CPU. I was on HT off for a time because of this. I recently went back to HT ON and I found that my win10 performance improved significantly. I then went back to PL and set up a profile which when turned on moved P3D to HT OFF (it is in the CPU affinity drop down). I moved all other processes to the other cores. Result: Lower temps and same performance and better Win10 performance. Very satisfied!
-
SPAD Next has a large community driven profile bank for almost any aircraft available for P3D/FSX. Must got through those to shortcut having to do profiles oneself.
-
Anybody using Shehryar Ansari's KLGB & KONT with Orbx SCA?
ShezA replied to Republic DC9's topic in The Prepar3d Forum
I wonder why it worked without 3.1. Must check this. -
Anybody using Shehryar Ansari's KLGB & KONT with Orbx SCA?
ShezA replied to Republic DC9's topic in The Prepar3d Forum
Hi Mitch, I use KONT in V4.5 and it appears to be OK. It has reflections on it but they are normal and not stuttering. -
The JF 152 is one of my favourites.
-
On AVSIM? I should be OK. Let me PM you.
-
You can but the problem is fixed now with the update to the GTN750 by Flight1.
-
Thanks. It is the Flight 1 version so it is a known issue. The nav button is unchecked in the audio panel so that is why I reached out for help.
-
Quick question, I tuned the GTN750 to the VOR at Louisville IIU. I started to receive the beep of the audio of the navaid. However, I cannot seem to find how to turn it off? Any help as it is very irritating.
-
If anyone has donated and not received their copy then please email me. Thanks for the donation.
-
I would allow it but the main models are with Ian, the other half of SSJ. You may send him a message on the forums.
-
Send me the PDF. As I have said before it is Ian who has the final project file so the entire jetways network with SODE are with him. I can adjust things like AFCAD etc. but not much more.
-
(Current) Opinions/Experiences on FeelThere`s EJetsV3?
ShezA replied to Ricardo41's topic in The Prepar3d Forum
Like Chuck I am still a fan of the original 145/175s from FT. I will be purchasing the latest version of the 175/195 soon because the older version is still a compromise as a port over from FSX. I will not be purchasing the 145 because my AS CRJ is too much of an overlap and i am very happy with the latest version.