Dick

Same happened to me but GSX did the pushback allright once I had removed the wheelchocks. I do not find this plane buggy.. did you download the update that was released today ?

I understand an incorrect IATA type code in the ac cfg file makes that PSX is unable to identify the aircraft properly. Aircraft entry in the UI will be yellow and the log wil state " wingspan unknown, max is taken". Normally the solution would to be to update the aircraft CFG file with the correct aircraft code. For the Asobo ATR and A310 I am unable to find the CFG file. Could it be that they are encrypted ? Could somebody give me a hint how to get PSX to recognise the aircraft wingspan correctly for these aircraft ? Thx !

When preselecting my arrival airport and gate I get a warning that the halfwingspan of my Fenix A320 is 39,6 mtr and the ac will not fit in the requested position, consequently wherever I go the adjacent aircraft polity disappear. I far as I know the full wingspan is 39,6 mtrs. How can I correct the wingspan ? thx very much Dick

Is this what you are looking for ? https://secure.simmarket.com/mk-studios-vagar-p3d4.phtml

Yes Rich, A simple restore and everything was as before. I did not restore the VolumemetricClouds CFG as mentioned in the LM instructions. Your scenery library order will be as it was at the time of running this " Delete Generated Files" script. The fact that your scenery library may not be in logical order does not have to be a problem. Did you set an insertion point in the ORBX central ? B rdgs / Dick

Yes. I feel your pain. I did the same and also saw the mess this delete generated files advice had given me. However all the deleted files were still in the trash/recycle bin so I could restore them. Dick

You do not have to look for serial numbers. On all the Fast Spring order confirmations that you received there is a "manage my orders" request. Once requested you will receive a mail with all relevant serial/order numbers and most of the orders come even with a download link.

These are the full instructions from LM : https://www.prepar3d.com/Prepar3D_Download_and_Install_Instructions_v5.pdf Did you install for the first time or did you update from an earlier version ? Did you install apart from the Client also install the Content and the Scenery ? B Rgds

Same thing happened to me this morning. No idea what caused it. My p3d generated a new file with the default settings. My system makes a backup on every startup, so I took yesterdays file and replaced the newly made one.

The Majestic Q400 is a very stable aircraft. When you say crash: what do you mean by that ? Does the aircraft crash somewhere or does p3d crash or does windows crash ? Is there something in the eventviewer ? Is it only the Qlink version ? can you fly other versions ? Can you fly other aircraft ? Have you followed the P3D debugging steps ? https://www.prepar3d.com/forum/viewtopic.php?t=123246

https://orbxsystems.com/forum/topic/206184-ybbn-brisbane-international-airport-for-p3dv4-close-to-release/

There are various threads about this on the ORBX forum... could not find any that gave a solution however. ( apart from replacing them with sode jetways ) I have the same problem on some gates, some others ( e.g. 25) function normally. b rdgs /Dick

and as to the Avsim downloads.. forum and library are different logins. Separate registration required.

What P3D version are you using ? In 5.1 an incompatibility with sode was introduced which caused a UCRT ctd. This was solved in 5.1hf1.

Yes.. I had the same experience as Mets737. I had so much fun with the 717 in P3DV4 and was looking forward to using it again in V5.1HF It was not to be.... could not even power up the aircraft. Like Mets737 said : not a single switch moved. Straight away a DXGI Hung error. Can't be bothered what the cause of this was. Uninstalled the aircraft again. And this time final.

Christopher. I tried but I do not see the behavior that you describe. I am on 5.1. Not sure if that would make a difference Dick

Can you explain how you get from 2 x 8200 lbs plus 20500 lbs to 369 ? Maybe you mean 36.9 tons ?

The day before LM released their P3D5.1HF I received this email from AI Lights Reborn: AI Lights Reborn Professional Edition Version 1.24.0 has been released. Please note this update is MANDATORY or you will have severe problems in the future with P3D hanging during load. If you experience this, disabling AILRP temporally will alleviate the problem until you are able to update to version 1.24.0.

When P3D starts UGCX starts as well. If UGCX finds itself in need for an update it will stop the startup of P3D and show a popup asking if you want to update. This popup however ( in my situation) is sometimes hidden "behind" the black P3D screen. For me it always take a bit of fiddling to get the update confirmation to the front so you can answer it. Go to the task manager and see if you can call-up the P3D screen (by clicking on the P3D entry ) and hopefully you have the UGCX pop now visible.. I am not aware of any option to update UGCX before starting P3D.

Do you have UGCX ? They need to be updated after a change and a sometimes the update request is hidden behind the P3D black screen. Maybe you could fiddle a bit with the task manager to get the UGCX update screen to the foreground ?

what did the eventviewer give you as error / faulting module ? You say that you added the "lines".. but there is only one line to add. Make sure that if you have already a [sim] chapter in the cfg that you do not add a second one..

Yes ! I tried the EKCH/gate 14 boarding/pushback scenario that earlier would give me 100% CTD but with the added lines to the CFG it went without CTD. Will do some more flying tomorrow but the first test from my side went ok Thank you all ! b rdgs / Dick

Hi Alan, You bring some new items into the equation. As far as I know everybody involved here was using 5.1. and reported the ucrtbase.dll error. I was under the impression that problem was introduced with 5.1. You are on 5.0 HF2 and report the SimObjectAnimationModule64.dll as the faulting module. I was also surprised to read that on your FSL321 the airbridge autodocks on L2. I never see this behavior. In my case there is always a popup asking a confirmation to connect to door L1. I replayed your scenario ( however you did not mention which gate you used ) but in my case the airbridge connected straight to L1 and I did not have a CTD. b rdgs/ Dick

Thank you ! It is of any help to know that not at all airports jetways cause the CTD ? (at least on my system.) I tried FSDT KORD en Gaya;s EDDT and there I could pushback normally. I could do further testing but do not know which addon airports you may have. Jetway movement and pushback at FlyTampa KLAS and EKCH did trigger a CTD. Good luck with your trouble shooting ! b rdgs / Dick

Dear 12B pilot, I have a simconnect log. The file was too big to copy paste here. It is in the mail now to you Thank you very much ! b rdgs / Dick