Jump to content

a3ifs40

Frozen-Inactivity
  • Content Count

    92
  • Donations

    $0.00 
  • Joined

  • Last visited

Everything posted by a3ifs40

  1. Good evening all I was wondering if anyone out there could recommend a good push back utility for FSX.I tried using the default one but it gives me all kinds of problems.I am willing to take anyones advice since I am sure you folks out there use some pretty good thingsthanks all in advance for your helpIan Snow
  2. Good evening I have not put a ticket in yet It seems it use to work fine like when you push back in the very tight areas I could hook it very quickbut now it always goes to the same place does anyone else have this problem? thanks Ian SNow
  3. Good Morning I am using the push back in the queen itself on the com panel. seting the distance and then the direction and no matter what it pushes to the same point thanks Ian SNow
  4. Good afternoon allI seem to have a problem with queen's pushback and I can't seem to figure out have to fix it.No matter where I am or what I set in the pushback Com section it always pushs pack the same distanceit does turn to the right direction but the distance does not change.don't know how many times I have ended up in the drink, terminal, another plane, grass, or buildingand it seem I cannot fix the problemi am running FSX Gold on a dell windows 64 systemAny help from us folks out there would be greatthanksIan Snow
  5. Good afternoon all I seem to have a problem with queen's pushback and I can't seem to figure out have to fix it. No matter where I am or what I set in the pushback Com section it always pushs pack the same distanceit does turn to the right direction but the distance does not change. don't know how many times I have ended up in the drink, terminal, another plane, grass, or buildingand it seem I cannot fix the problem i am running FSX Gold on a dell windows 64 system Any help from us folks out there would be great thanks Ian Snow
  6. holy cow it worked ok now i have to wait till work is over to test thanks all for your help and hopefully it is happy flying enjoy you day and week thanks again Ian Snow
  7. Good afternoon Gee must not be my day I keep trying the CMD prompt and it keeps telling me it is incorrect I enter my PC name now do i do it the following way cacls C:\Windows\System32\uiautomationcore.dll /G name-PC\name:F or am i just not haveing a good day thanks Ian Snow
  8. Hi Shawn thanks again for the advice and help ok delte the files and if that does not work then take the good file and put it in the 3 areas wow 32wow 64and just C\FSX am i getting the straight? thanks again Ian SNow
  9. Members 1 posts Posted Today, 06:22 PMPerhaps someone can tell me what issues lurk out there for me but after a lot of research this was the simplest answer I found. I did it and have not had a CTD in a few weeks. Basically, I uninstalled it. Here is just the instruction part of the posting (it's all I copied):"HERE IS THE FIX: You may have to take ownership of the files if windows stops you from deleting the file. Open CMD prompt and right click to run as administrator and then type in exactly as below substituting your windows login username where it says username:takeown /f C:\Windows\System32\uiautomationcore.dllcacls C:\Windows\System32\uiautomationcore.dll /G username:Ftakeown /f C:\Windows\Syswow64\uiautomationcore.dllcacls C:\Windows\Syswow64\uiautomationcore.dll /G username:FNow you can just navigate to your syswow64 and system32 folders in windows explorer and after backing up the UIautomationcore.dll files just delete them from your computer. (Remember to delete the Uiatomationcore.dll file in ure FSX folder also if you installed it as the fix in other posts.)"Hope this Helps,Shawn Droney Hi Shawn ok just to get this correct after I follow all this i just go in and replace the good file in all those areas along with putting it in the root directory or am I completely lost here? thanks again Ian Snow
  10. Good afternoon Ok I already have the sim in the following area C\FSX So all i need to do is take the uiautomationcore.dll and put it in there and that is it? thanks Ian Snow
  11. thats for your reply i don't mean to sound like a major moron by can you tell me what and where the FSX root directory is please? thanks again Ian Snow
  12. Good morning all I was wondering if any of you folks out there could give me detailed instruction on the following How and where do i install the correct uiautomationcore.dll in the sim I seem to be having a major problem lately figuring this out any and all help would be great Thanks in advance for your help and advice Ian SNow
  13. good morning I have installed my sim in the C drive so it would say the following C flight sim Per the help page at PMDG it says it is a good idea to do that also if it is the uni dll problem that everyone has spoken about how and where do i put the correct file? My anti virus is Mcafee I am better off getting rid of it and putting in something else and if so what else thanks again for all your help with this Ian Snow
  14. I am afraid in need help from the masses out there I just brought a brand new computer. After installing the sim using the instructions on the PMDG help site I did my first flight from KBOS to EGLL. I am sitting in the room reading a book and I look up at the computer to see that it has froze 498 miles from CYQX. I am just alittle confused as to why. I have no add ons but the queen and I have heard of some problems with the sim and windows 7 but i made sure to avoid that stuff before i set up a help ticket I was hoping you all can give me some help my system specs are as follows Dell XPS8300Windows 7 64Bit OSNvidia GT530XPS 8300 Intel Core I7-2600 processsor 8MB Cache 3.4GHz8GB DDR3 SDRAM at 1333MHz - 4x2 GB1TB Serial ATA 2 Hard Drive 7200 RPM any and all help would be great thanks in advance Ian Snow
  15. Hi John and Ryan Ok thanks so much for you advice. I will start putting it together in july.should be a fun if I don't zap myselfthanks againIan Snow
  16. hello I think we are off topic a tad.So to reset the move seems to be to build onelast questionI have been told that sometimes the parts don't talk to each otherhow do I know if they will or not?thanksIan Snow
  17. Well to be truthfull I am a 42 year old who does not have a clue about computers and I work from home so technically I am working but every once in a while I check my laptop to see if there is an update on this board
  18. thanks for all your adviceLooks like building it yourself is the moveone question though since I am not so computer smartwhat is a "Western Digital HDs and OCZ and Intel SSDs"thanksIan Snow
  19. Good evening I have finally saved up enough money to get a new computer. I already have a good monitor so all I need is a good tower along with mouse and keyboard. I talked to Ryan awhile ago and he told me my it mite be time to upgrade from my 2007 gateway. So if Ryan is out there I would love some advice. I am looking at either a new HP or Dell.I am willing to take all opinions so feel free to fire away.thanksIan Snow
  20. Good afternoon I am having a problem with the 747-400X in FSX with Windows 7 Home Edition 64 bit. When flying all of a sudden I get a freeze up in the moving map display from the captains view. I have done about 20 plus flights on long range missions to Africa, Asia, and the Mid East. I have tried it with both flight planner and no atc in use, also I have done the flights with the windowed view and with full screen view. I have used both weather and no real weather.What happens is the following I will be going along at altitude and all of a sudden the moving map display will freeze in the left hand seat, I can swtich to the co pilot and everything with be fine except the plane will start to go off course and down to the right on left, now sometimes when I switch back all 3 main displays will be black, sometimes not. then suddenly the left display will show fine and attempt to get me back on course which will work fine. only twice since i have started the research has the flight CTD so most of the time I can continue the flight.I do not have any add ons installed except for EGLL scenery, VTBS scenery and the PMDG 747-400X I hope this helps someone who can give me advicemy system is the followingGateway FX530S Windows 7 OS 64bitIntel Core 2 Quad Processor q6600 2.4GHz, 1066mhz FSB 8MB cache 4.0 GB RamNvidia GTX460950 Watt Power Supply19 inch Monitor ThanksIan Snow
  21. Good morning I am kinda new to this problem but last November I upgraded to Win 7 64 bit from XP 32 and this problem kept coming up. At firstI thought I was doing something wrong but after alot of frustration I started to search online and found this wonderful thread.Now I looked through my entire FSX file and could not even find anything labeled "UIAutomationCore.dll"Since I am a complete computer moron I just want to ask one question?All I have to do to find FSX happiness is to download that file from either Vista UIAutomationCore.dll:-http://www.mediafire.com/?mik2mlqdz1w -- OR --http://www.corrupted...Corporation.aspversion 6.0.6001.18000 but what happens if I have I never had VISTA I went from XP 32 to Win 7 64?thanks for anyones help in advanceIan Snow
  22. hello I just tried to do another flight and this time it froze in mid ocean 315 miles from 5250Nany help from you folks would be greatthanksIan Snow
  23. Good morning Ok I was right in the middle of a flight from EGLL to KJFK as BAW117 in the 747-400 Pax when about 480 miles from waypoint Taffythe whole thing freezes up on me and I have no idea whythe screen did not crash it just froze without warningI tried to do everything but it was no good I had to shut it offnow besides the fact I am ticked off, I would like to know the followingHas this happened to anyone?It is a sign of a major problem brewing?Is it just random bad luck?could it be anything else I am not thinking off at the moment my specs as as followsGateway FX530S Windows 7 OS 64bitIntel Core 2 Quad Processor q6600 2.4GHz, 1066mhz FSB 8MB cache 2048MB 667Mhz Duel Channel DDR2 SDRAM 5.0 GB RamNvidia GTX460950 Watt Power Supply19 inch Monitor thanks for all in advanceIan Snow
  24. hi thanks i will try itif it does not work i will do the reinstall thingthanksian snow
  25. Hi sorry to ask thisbut i tried to find UNC and could notany chance i could get so directions?thanksIan Snow
×
×
  • Create New...