asandor

Sorry for the late response back, yes it does show button 0 in P2A, but it does work even though it shows button 3 in the sim in the yoke configuration.

I just got the Honeycomb Alpha Yoke, and just checked it in P2ATC and that button works fine for me. Just tested it with a radio check and go back a 'You are loud and clear' response from ATC. The one thing that is different on my setup is I don't have the PTT Hot Key setting enabled. Only the PTT Joystick Button.

I actually have a few plugins, The Active Sky plugin, autogate, avitab, better pushback, CEF (for FF A320), flywithlua, gizmo, JARDesign ground handling, a plugin for the Nimbus KORD scenery, the python plugins, SAM, skunkworks plugin for some Aerobask aircraft, terrainradar, x-camera, of course xjet, X-RAAS2, xsaitekpanels, the little navmap plugin, the plugin for the AvilaSoft EFB. So as you see I have a few.

Steve, I have the AFL 350 and when I load up the aircraft at EGLC and start up the GTN750 all seems to be fine. I was able to do a flight plan from EGLC to EGCC with no issues. Aslo was able to load a SID and STAR with no problem. I was able to get to the settings option from the XP plugin menu.

Active Sky for XP should put the file you need in c:\users\yourname\AppData\Roaming\Hifi\AS_XPL\Weather and the file name is current_wx_snapshot.txt

I just checked and it does not look like you can.

Thanks, I went ahead and excluded the folders where I extract them too and the C:\Reality-XP folder. I was able to install it after that.

Downloaded the new install and getting a virus warning from it. Says it contains Trojan:Win32/Azden.A!cI This is happening from Windows Defender.

There is a solution for this now. Go here: https://forums.x-plane.org/index.php?/forums/topic/138236-b200-reality-xp-gtn-750-sasl-bug/&do=findComment&comment=1326064

Well I think I see what the issue is. I just checked the windows event log and looks like a bad disk sector is the issue. Gonna try to run a repair on the drive and see what happens. I'll also move the app over to another drive until I can get a new disk. edit: Just checked both drives and no errors found. For now I'll reinstall the app to the other disk.

I just tried running it as admin and same issues happen. The problem only occured when I updated to 2.4.0.4_x64 from 2.4.0.3 r1-r3. Should I try to uninstall and reinstall it? or maybe reinstall the 0.4 patch?

Hi, I tried start up Pilot2ATC again today to get the logs for you, and I got this error when I started it up. Unable to initialize Database An error occurred while reading from the store provider's data reader. See the inner exception for details. Execution Timeout Expired. The timeout period elapsed prior to completion of the operation or the server is not responding. When I click ok, the app finishes it startup. Here is the log file when I tried to add the following flight plan. KLGA BIGGY MXE KDCA Here is a dropbox link to the log file: https://www.dropbox.com/s/t53079xfbtmje6h/P2A_2018_Trace_File9.log?dl=0 I exited normally out of the app.

Updated to to 2.4.0.4_x64 today, when to enter a flight plan (KLGA BIGGY MXE KDCA) and when I try to enter in KDCA it gets stuck like its trying but just won't go in. All I get is the thinking cursor circle when I move the mouse to the right side where the FP goes. I tried to enter a flight plan that was different, from KOKC to KDFW, but got stuck with KOKC. I can see the disk working as it tries to find it, but eventually the disk stops and get the thinking cursor with nothing. Airports I have tried so far is KDCA, KOKC, KLAS. Entering them in manually or importing them from an XP 11 flight plan, its the same thing. Using AIRAC cycle 1801 from Navigraph.

I think this is the same issue that I have with my B200 which is the XP 11 version, the XP 10 version of the B200 doen't have the issue. The other Carenado aircraft I have are all XP 10 versions so they do not have the problem. I tried leaving a message on the org Carenado forums, but they never answered the post. Also, I tried the usemouse = NONE and it does not work, at least for me. Also when I turn off the GTN unit, the problem does not go away, only way I can fix it is to reload the aircraft

I have a quick question, if I have both the 750 and the 650, do I have to run both installs in the zip file or do I just need to run one of them. I have always ran both of them previously.

Try this...before you turn on the battery and avionics, open up the GTN then turn on the battery then the avionics. See if that helps to make it come on.

Well it functions fine up to the point where I turn on the GTN unit. I'm getting ready to post something about it over at the org on the Carenado forum. We'll see what they have to say about it.

Ok, so I just ran a test. I have both the XP10 and XP11 versions of the Carenado Super King Air B200, only the XP11 version has the problem I indicated in my original post. The XP10 version works fine with the GTN units. I also have several other XP 10 planes from Carenado and they are all fine with the GTN units, at least for me they are. They probably made enough of a change in the XP11 updates that it is causing an issue with the GTNs.

Well, I tried what you suggested, and it did not work. I bet its something Carenado did when they redid the B200 for XP 11. I am using XP 11.05. Maybe I will send something to Carenado about and see what they say.

So, after I figured out how to get the GTN 750/650 working with my setup, I loaded up the Carenado King Air B200. Start up the battery and the avionics, every thing was looking good. I turned on the GTN 650, then powered down the avionics and battery. When I tried to turn on the battery I noticed that the battery switch wasn't moving. I did the same for the avionics and it didn't move. Since I have a couple of Saitek panels, I usually turn stuff on though that. I noticed that the power did come on but some instruments didn't look right. The GTN 650 come on though. Here is part of the log.txt file where the problem occurs. [SASL INFO] loading GPS_hdef_dots_copilot [SASL ERROR] can't load component GPS_hdef_dots_copilot [SASL ERROR] Error updating avionics: [string "s/Animations.sec"]:0: attempt to perform arithmetic on a nil value [SASL INFO] loading GPS_hdef_dots_copilot It repeats that about 9000 times before I quite the sim. I started back up the sim to look at the log file, and those lines are not there. As soon as I turn on the GTN 650, the lines show up in the logs. Turning off the GTN 650 does not fix the issue. I have to exit the sim to get control back of the switches and displays. Has anyone else seen this issue with Carenado aircraft?

Until that build, for now I can just turn off the power and avionics and turn them back on to get the 750/650 working.

Ok, so playing around with it for a little bit, I actually got it to work. With the power on and avionics on when I start up the GTN it was a blank screen. But I tried to turn off the power and avionics while the GTN was up and when I turned the power and avionics back on the unit is now working. Though I have only 1 on, and I try to turn the other one, blank screen, I have to power off the power and avionics and then turn them back on again for both to work.

With the trainer 6.41 software there is also the GDU 1060 that comes up and works fine. I reinstalled but no go, the 750 and 650 are still blank screen. Though you can tell that it is trying to turn on as there is a small glow in the background like in the picture I posted last night before I rebooted and reinstalled.

Well, got into X-Plane 11.05 today and no go. The GNS is a blank screen again. After I checked it last night to see if it came up, I just left X-Plane. I made sure I unselected the GNS before I exited X-Plane. I am getting the same issue in the rxpGtnSim.dll.log file: 17/11/04 17:30:34.561 04424 - ] # rxpGtnSim64.dll version 2.4.9.0 17/11/04 18:05:16.965 07640 ERROR] Trainer Failed Task: 00000001 17/11/04 18:05:16.992 07640 ERROR] The specified procedure could not be found., code: 0000007f 17/11/04 18:08:30.137 07276 ERROR] Trainer Failed Task: 00000001 17/11/04 18:08:30.155 07276 ERROR] The specified procedure could not be found., code: 0000007f And when I go to the Garmin trainer software, the GNS 750/650 will not turn on. But the other ones do. Maybe its my video card I have? I have a GTX 1080. Not the Ti. Also have the latest version of the Nvidia drivers installed. Or maybe its a its a dll that I am missing?

Ok, rebooting and installing 2.4.9 did seem for work. I'll test it some more over the next day or so and see what happens.