rooster hancock 2003

Sergey Can you please share your replacement BGL if it solves the problem.

Thanks

Thanks Blasb but regarding CS forum, I have been there and done that and tried all suggestions, but with no joy sadly. Just don't know what to do! Anything from anyone would be much appreciated.

Thanks.

Hi Blasb.

Thanks for your reply. I have tried 2 of your 3 suggestions with no joy I'm afraid. The last option, well I went to properties in the ACE exe but could not find a "unblock" tag as such. Could you point me in the specific direction please.

Thanks again.

Thank you for your reply "Reader". I have gone through this process before and just to make sure I tried a reinstall this morning, and yes the ACE exe is there just like before, however, when I right click on it and run as administrator it will not open which is what I have experienced before. Any further thoughts would be much appreciated.

Thanks.

This is a real problem for me. Despite following all of CS's instruction for downloading their aircraft, (making sure av is off etc), I cannot get ace to appear as part of the downloaded product. This is for the 757 and 767 in P3d v5.4. Any thoughts anyone?

Thanks.

noahharget. If you figured it out , I think it would be very helpful to the rest of the community if you could tell us how you did it. That's what we are here for, to help each other out don't you think 😉👍.

By the by, I do also own the Final Approach Simulations MKJS for P3d but I keep having elevation issues with that, where the aircraft just sinks through the runway on landing. I would be grateful if anyone has the cure for that as I can't find any cure online. It would be nice to get one of these MKJS's working correctly.

Thanks again in advance.

Hi All.

I have the above scenery installed in P3D V5.4 with all the patches,( manufacturers own and INI builds) and basically all is well except one thing that is annoying me. With the afcad that I have the aircraft are entering rwy 07/25 early and backtracking to the end to take off on 07 instead of taxiing to the end of 07 which is the norm at mkjs. This quite often means go arounds with aircraft on the runway to long when on final approach. I'm afraid I don't know how to adjust afcad files so if someone has another file to solve this problem or knows where one can be found, it would be very much appreciated. Thanks to anyone for your kind consideration.

Best regards.

Malcolm

Hey Afterburner, you were right and I think I may be cured!!! It seems it was my monitor settings which is a LG 4K TV. I reset the settings to default and tweaked a little from there and although there is a little hint of the old problem, it is very much better now, to a level I can live with.....hooray!!! Afterburner, I want to thank you for your kindness and support, sticking with me, and getting me through my problem. You are a star Sir!

Hi. Turning EA on and off made no difference, however turning down cloud brightness at night has helped just a little, thanks for the suggestion Afterburner. There is still a little way to go though. Anyone with any further thoughts welcome

Thanks for coming back Afterburner. I will try what you suggest and report back.

Yes I do but with legacy clouds. Using Active Sky and Cloud Art as mentioned. 

I was afraid they would not show what I'm seeing well. What I'm seeing is really quite green and flickering. I have done some more shots which I hope shows a little better. Sorry I don't know how to show them as you do Afterburner and thank you for your kind help/support. Others are welcome as well of course. 👍😉 https://imgur.com/a/uEkGFzS

ok so I think I've done it.     https://imgur.com/a/WJE0tWd  I think the pictures do not reproduce what I'm seeing as strongly but hopefully you will all get an idea. I would just say again, that my day time textures look just fine and I'm very happy with them.

Thanks again for any help to resolve this.

Ok I've taken some pictures as per instructions above, but they won't copy and paste to the reply section here.

Thanks for your reply Afterburner, I will give it a go.

Hi All.

My topic title says it all. I am very happy overall with my setup, but at night I seem to get muti coloured layers in the sky and green shimmering clouds which reflect a bit into the cockpit of which ever aircraft I'm flying. I have a RTX3090ti card and I use  Envdir, Envtex and Envshade, also Active sky and Cloud art all in P3d v5.4. I'm sorry, but being an old duffer I don't know how to do screenshots for you. I'm guessing I've gone wrong in my settings somewhere , but don't know where. Any thoughts on recommended/correct settings to solve this problem would be so appreciated.

Thanks in advance and best regards. 

Well the old single brain cell was working overtime!!!😄😄

Hi Gentlemen. This is just a courtesy post to say I have fixed my problems! Hooray! I did this by deleting sceneries, then doing a repair on P3d and than re-installing the deleted items, one at a time. I just want to say thank you to all those who made a contribution here, especially Dan and jkeye who stuck with me and pointed me in the right direction. Thank you for your kindness/support.

Sincere and best regards Gentlemen. 

Ok, thank you for your kind support. I just don't know where to go from here. If anyone else has any thoughts, they would be gratefully received.

Best regards.

Thank you, I look forward to hearing from you. 

blaunarwal, thank you for your reply. I wonder if I may ask a favour. You noted that we don't have parity with our setup's. Would you be kind enough to temp delete orbx vector and see if that makes a difference as I don't have vector installed. When I do have it installed the problem is gone, but I don't like vector as it causes other problems in the sim.

Thank you.

Ok Folks, I'm afraid I still haven't been able to produce a screen shot for you, (I'm getting on a bit and just don't know how to do these things), but here are the approx co-ordinates. LAT= N47* 28.31', LONG=W122* 23.16'. What I am seeing is a squared off piece of land and water forming a pit in the scenery with buildings and vegetation floating above. Hope this helps you folks to help me.

Thanks again.

HI Guys. Thanks for coming back. I have Orbx global installed and that's all. I did have Vector installed and there was no elevation issue with that, but I found it has a bad effect on the P3d map so uninstalled it. Dan I will come back as soon as I've worked out how to attach the picture and co-ordinates you requested.

Thank you.

Hi All. As mentioned in another thread, I have recently installed into P3d V5.4, AIG with the one click automated process. I had two problems after the install. One was an atc audio issue which has now been resolved with the kind help of others on this forum. The other, which I now need help with is an elevation issue with the water just to the west of Taxi2Gate KSEA,(updated to P3d v5). It's like a pit in the water, which only appeared after the AIG install. I've also tried the INI build exclude. I've tried to take a picture but can't get it to show here. I'm guessing it's a double afcad problem but don't know how to access the AIG afcad files or even if that's the correct one to delete. Any help would be much appreciated. Many thanks.

Best regards