asanal

"It was also something that was not in the manual. It took me some considerable probing and asking the right people to get that information." You are right. No info available in LG manual. HDMI sources is easy to locate, but LG monitor is not receiving video. sounds are OK. Maybe my HDMI cable carries sound but not video. I am getting new HDMI, let see what will happen. Thanks for your info.

n4gix, Yes, I have three HDMI port. First I connect PC then I connect to available TV HDMI port. Then I open the Input screen and I clicked on same TV HDMI port. TV receives PC SCREEN PICTURE with sounds but no youtube videos shows up. I switched the HDMI with one working HDIM, some result. Thanks

Alan. Thanks PC HDMI cable connected to same TV inputs HDMI . I opened the YOUTUBE and selected Airplane flight Video, PC Screen SET picture appeared but I am hearing airplane sound no picture.

God Bless Him, My condolences to his family.

I hope some member can give an advise how to connect Desktop pc to TV monitor. I would like to see if FlightSim appears at TV Monitor. I connected HDMi cable from PC to TV monitor, I hear sounds but not pictures Thanks

Alex, Thank you very much. "ENABLE to DISABLE" disabled and controls are working. Later on I will make my regular flight and will confirm you. I also changed to Sensitivity for Aileron and Elevator axis @ 127 with NULL ZONE @ 1," You saved my CH yoke / Pedal. I think they are thanking you,also.

How can I calibrate 747 controls. I cannot make a complete flight, every time during takeoff / cruise A/P keep disconnecting. This is happening with all 737 series also. I tried work on P3D Calibration Device. I really have no idea what is happening. I have 12 years CH Yoke/Pedal, I like them. Please give me an advise Thanks

Jay, Thanks for your reply. I updated P3D to v4.5.13.32097 and use PTA v2.67. Result as follow: Preset C:\Users\asana\Downloads\pta_2.67\MattDaviesJuly2019.ini loaded Prepar3D 4.5.12 build 30293 detected as target verson Shaders cache directory found at C:\Users\asana\AppData\Local\Lockheed Martin\Prepar3D v4\Shaders\ Prepar3D main configuration file found at C:\Users\asana\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg ERROR: shader file D:\Lockheed Martin\ShadersHLSL\General.fx is not original Prepar3D shader and can't be used ERROR: shader file D:\Lockheed Martin\ShadersHLSL\GPUTerrain.fx is not original Prepar3D shader and can't be used ERROR: shader file D:\Lockheed Martin\ShadersHLSL\PostProcess\HDR.hlsl is not original Prepar3D shader and can't be used Applying preset C:\Users\asana\Downloads\pta_2.67\MattDaviesJuly2019.ini... ERROR applying preset: source file C:\Users\asana\Downloads\pta_2.67\SHADERS_BACKUP\General.fx not found ERROR applying preset: source file C:\Users\asana\Downloads\pta_2.67\SHADERS_BACKUP\GPUTerrain.fx not found ERROR applying preset: source file C:\Users\asana\Downloads\pta_2.67\SHADERS_BACKUP\PostProcess\HDR.hlsl not found Applying [Reduce cloud brightness at dawn/dusk/night] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Scale the width and height of clouds puffs] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying ["No popcorn" modifier] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Clouds lighting tuning] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Clouds saturation] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Clouds light scattering] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Clouds shadows depth] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Turn off clouds directional lighting] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Clouds Fog tuning] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Haze effect] to D:\Lockheed Martin\ShadersHLSL\FuncLibrary.fxh ERROR applying tweak [Haze effect] Problem with patch #1 - Patched block not found. Applying [Sky Fog tuning] to D:\Lockheed Martin\ShadersHLSL\FuncLibrary.fxh ERROR applying tweak [Sky Fog tuning] Problem with patch #1 - Patched block not found. Applying [FXAA quality] to D:\Lockheed Martin\ShadersHLSL\PostProcess\FXAAResolve.hlsl Applying [Tweak main config (prepar3D.cfg)] to Main config file Preset has been applied with errors. See log above Shaders cache cleared Preset C:\Users\asana\Downloads\pta_2.67\MattDaviesJuly2019.ini loaded

Matt, Hi I am having same problem after installed 2.67. I selected repair Client Module of P3D. I run PTA again (as administrator) Some errors cleared and some errors are not cleared. Preset C:\Users\asana\Downloads\pta_2.67\default.ini loaded Prepar3D 4.5.12 build 30293 detected as target verson Shaders cache directory found at C:\Users\asana\AppData\Local\Lockheed Martin\Prepar3D v4\Shaders\ Prepar3D main configuration file found at C:\Users\asana\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg ERROR: shader file D:\Lockheed Martin\ShadersHLSL\General.fx is not original Prepar3D shader and can't be used ERROR: shader file D:\Lockheed Martin\ShadersHLSL\GPUTerrain.fx is not original Prepar3D shader and can't be used ERROR: shader file D:\Lockheed Martin\ShadersHLSL\PostProcess\HDR.hlsl is not original Prepar3D shader and can't be used Applying preset C:\Users\asana\Downloads\pta_2.67\default.ini... ERROR applying preset: source file C:\Users\asana\Downloads\pta_2.67\SHADERS_BACKUP\General.fx not found ERROR applying preset: source file C:\Users\asana\Downloads\pta_2.67\SHADERS_BACKUP\GPUTerrain.fx not found ERROR applying preset: source file C:\Users\asana\Downloads\pta_2.67\SHADERS_BACKUP\PostProcess\HDR.hlsl not found Applying [Reduce cloud brightness at dawn/dusk/night] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Clouds shadows extended size] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying ["No popcorn" modifier] to D:\Lockheed Martin\ShadersHLSL\Cloud.fx Applying [Rayleigh scattering effect] to D:\Lockheed Martin\ShadersHLSL\FuncLibrary.fxh Preset has been applied with errors. See log above Shaders cache cleared

Keven, Thanks

I am tracing some problems. I have to uninstall chaseplane from Control Panel. When I start SIM, still chaseplane (Top right corner) view screens keep coming on. How can I remove these screens ?

Jay, thanks for your replay, 1- I have both folders in place. C:\ProgramData\12bPilot\SODE\sdx\DrzewieckiDesign and C:\ProgramData\12bPilot\SODE\cfg 2-I don't have DD Kewr Addon in my PC. 3- I agree with your suggestion "best option is to use GSX". Evros thanks for your replay. You and Jay made me wake up from this nightmare . I made my self confused and spent so much time on it.

I am trying to contact SODE,sent e-mails, posted on their forum no response. Only chance I have as always is AVSIM, Here is my problem: "This is my third year trying to utilize SODE for KEWR. NO successes, I keep utilizing GTX without SODE. This year I think I found the problem. 1- I think, SODE doesn’t have P3D KEWR File instead off “ DRZEWIECKI DESIGN - NY AIRPORTS V2 X : KEWR, KLDJ, KCDW FSX P3D” is the KEWR Airport folder. After installing and activating SODE. I am getting long pages of error reports. SODE searching for DD KEWR file but cannot find it Because DD is not exist in my PC. How can I solve this problem I like SODE , I hope I can installed correctly." Thanks A

There is no help or response. I have the uninstall CP from my PC. BTWY It was not easy to uninstall CP just Deleting "cameras.cfg". I will try next time.

I need help. Two weeks ago I purchased CP . I went through Youtube and this forum to find a way start the CP program correctly. Unfortunately what ever I done it doesn't work. 1- I cannot zoom CP took over. 2- An addition "function panels" stuck with the plane. 3- I cannot control view changes. I know with experience person it can be 2 minutes fix, with me almost two weeks. Many un-install/re-install> I read the manual,also. Thanks

I think I managed. I lowered the Saturation to " 0.71". Now it is better. Thank you for your help.

New 431.36 Driver and combination HDR "ON" , Brightness "0.88", Bloom " 0.00" Saturation "1.51" gave some improvement. But, I can see the difference, my colors are not right (?)

I installed new GPU driver 431.36.

I put two version in texture,cfg file. Now, I have blue and brown schemes.Only problem I am experiencing both [instrument panels are too dark. Hardly I can see the instruments. I read at ATR Webpage to solve this problem we have to increase monitor brightness and shutdown HDR. I wonder ,who wants to fly with bright textures all around us. Other option, you have to open instruments light, flying in blue sky.

I have V1.2 .My is new purchased 2 days ago. Here is blue cockpit I have Here is ATR web page V1.2 cockpit blue model There is a big difference. I just reinstalled now,No change.

Jahurz, Yesterday I purchased ATR2. Today, I found your post, I try to open the "Readme Instruction" no successes. How can I open these files? Thanks

Pierre, I am glad you solved your problem,too.

,Pete, Thanks for your help

Kyle, Thank you very much. Almost every flight 747/777 during a year I was experiencing many AP disconnects. I just completed my first flight without AP disconnects . KEWR-KDEN flight I selected "DISABLE" option in FMC>SIMULATION PAGE 2/0>CTL INPUT WITH AP ON> ENABLE<DISABLE

I also checked the manual and cannot locate "Settings to ignore the hardware when the AP is on"