asanal

On 11/14/2018 at 1:06 PM, Nyxx said:

Reworked and ambient lighting added all lights now have a new colour.

V2

https://forums.flightsimlabs.com/index.php?/topic/19480-pmdg-747-8f-update-14th-nov-v2/

David

Thanks for you contribution to 747-8.

I am trying to purchase " Panel lighting" from FlightSimlabs I filled registration info,  waiting  four hours to validated my membership to purchase Panel Lighting.

I didn't get any response. Am I doing some thing wrong ?

It is happening to me,also. No GTX. I have to shutdown Sim  and restart.

It is happening to me,also. No GTX. I have to shutdown Sim  and restart.

Skewr, 

Kyle and Jim provided info to you.

I, just want  to  show you two more picture of 747-8 from my recent flights. 

https://imageshack.com/a/img922/6498/LyPoHt.jpg
https://imageshack.com/a/img923/5700/uQqcS6.jpg

On time KEWR- KRST  🙂  delivery. Thanks to PMDG Team.

Dan,

OK. I will be attention.

It doesn't  happens  often, but it is there.

What is  AppHangB1 ? How can I solve the problem?

During the flight DC-6  stooped flying and I got this Error:

Problem signature
Problem Event Name:    AppHangB1
Application Name:    Prepar3D.exe
Application Version:    4.3.29.25520
Application Timestamp:    5b2c3263
Hang Signature:    0000
Hang Type:    134217984
OS Version:    10.0.17134.2.0.0.256.48
Locale ID:    1033
Additional Hang Signature 1:    00000000000000000000000000000000
Additional Hang Signature 2:    0000
Additional Hang Signature 3:    00000000000000000000000000000000
Additional Hang Signature 4:    0000
Additional Hang Signature 5:    00000000000000000000000000000000
Additional Hang Signature 6:    0000
Additional Hang Signature 7:    00000000000000000000000000000000

Will you please review this event and advise how to correct it.

Unfortunately  I cannot  complete the flight at 37000ft A/P suddenly  disconnected. I cancelled the flight. I am going to replace my  yoke.

I have  sudden A/P discount problem.No solution found yet. Possible hardware problem. I am going to fly same route let me see what will happen

Marc,

I have CH Eclipse yoke/ pedals. I think it is 10 years old. Heavily used. I really cannot do the repair, I never open the CH Yoke case.

Thank you.

Dan,

I think there is a misunderstanding. That is what I was trying to say "move the yoke or trim and A/P disconnects" When plane on A/P, if you move yoke it will disconnect the A/P. IN my case I don'nt move yoke or trim A/P disconnect it self with out any input. ( turbulence etc)

This was my third option in above post  SIM Yoke calibration."or you can select an option where moving the yoke does not disconnect the autopilot." today cost environment I prefer to select this option then YOKE.

Thanks

Alan.

I am just making a test flight. I take off climbed 1000Ft engaged A/P  climbed 4000Ft put sim in pause pull the YOKE USB cable then un pause the sim  A/P still engaged.

Climbed 240FL with A/P engaged, clicked  Pause and disconnected  YOKE cable then unpause A/P still A/P remains engaged.

I just realized after I installed USB cable,777 is flying but YOKE remains DISCONNECTED (?)

I think it is time buy a new YOKE.

How can select an option where moving the yoke does not disconnect the autopilot ?

Thanks

Kyle,

Thanks for your response.

I was advised look at 747 FMC - PMDG SETUP> <OPTIONS <SIMULATION page 2/10 CTL INPUT WITH AP ON if disabled select Enable. I selected "Enable" problem solved.

Alan,

Thanks for advise I will make  a test flight

"It's easy to test to see if this is the problem too. Simply take off, engage the autopilot, hit pause and unplug your yoke, then unpause the sim. If the autopilot stays on when it would otherwise have disconnected, it was your yoke sending a spurious signal which was the problem."

Jude,

You are right, Some times I see the line on VNAV. Now I know what is happening.

Thanks for your advise.

Thanks  again to all

Wilhelm,

Thanks for your response.

The problem is before move the yoke  A/P disconnects it self.

My first request for Help was for PMDG 747 . I  recived help and problem solved (It was so simple)

That is my second Help request for PMDG 777 A/P:

Last three months on and off I am  trying to  search  solution for 777 for the following problem:

 A/P has habit after take-off, over 1000 ft area when I engage the A/P,  couple of second with out any reason A/P disconnects  and  I manually climb to cruise LV,  I connect the A/P . Before TOD  A/P decides  to disconnect  its self  and dives to almost to hit the ground before I recover  it.

Many times I uninstall/reinstall PMDG 777 and P3D with cleaning off all left over files and documents. Then I

install Add-ons. 

That is the end.

Do you have any advice to solve this problem.

I tried to  use REX SF but it didn't work with 777/747 Weather Radar. Did you managed? IF yes will you please advice how can I do it?

THX

Ciaran,

Thank you very much,

"Then go into your FMC - PMDG SETUP> <OPTIONS <SIMULATION page 2/10 CTL INPUT WITH AP ON if disabled select Enable then test from there"

 I selected "Enable"  problem solved.

Last three months on and off I have problems with PMDG 747 P3D. I am having major problem with A/P almost every departure when I engage A/P, it disconnects. I try to connect A/P again it disconnects. IF with luck I make the cruise flight I am already tired at 380FL  .  it works for about an hour then A/P disconnects  and dives the 747 to almost to ground .( VS 8500  Immediately after A/P disconnects)

I tried to find reason why A/P disconnects . 

Several times I uninstalled P3D and clean the files from system. No success.

Several times I uninstall/reinstall PMDG 747. No success.

I went through "Controls" calibration/axis no success.

I deleted  my CH Eclipse yoke/pedals  software and installed new one . No success

Recently I purchased REX Sky Force Weather Engine no success.

Today I took PMDG 777 to test. During climb A/P disconnects. During cruise flight SkyForce inject sudden turbulence A/P disconnect. That is the END.

Will you please advise what I should do? Is it possible My CH Yoke and Rudder pedals need replacement?

Thanks

Problem solved by its self. No idea how happened. Now I have DC6 A and B has GTN650 on panel.🙂

DC6-B Panel GTN 650 is not  turning ON. Pop-UP GTN 650 is turning ON.

What am I doing wrong?

DC6-A   GtN 650 installed panel and Pop-up 650 are Turning ON.

Dan

I have now 750-650. I have to learn how to install over DC-6 Garmin. Then fun will start. Lo Enroute charts to navigate is the way to go...

Dan,

Yes, you are right, screen is big.

I wish I purchased 430/650.

Thanks for your reply.

Is it possible to install  GTN750 into DC-6 Cloud master?

Thanks

I solved the problem.

I am receiving warning from Microsoft Windows 10, that my" One Drive storage"  is full (5GB). They are asking 67$ yearly storage fee.I utilize my PC only for Flight Simulator.

  My PC Hard Drive  (g) has  available 1000GB free storage.

1-How can I utulize  my PC Hard Drive storage, instead of Microsoft OneDrive?

Thanks