PierreFSX

Ok that will help a lot, Last question, I couldn't find anything on how to connect/disconnect the Jetway. Is it supported or I need to use the key stroke (ctrl-J) Pierre

Hi, I run a multi screen (3 Monitor) setup. When I start P3D 4.4, I always have to expended the initial screen so it covers my 3 screen area. Is there a way to have P3D to open and fill all 3 screens automatically. Thanks Pierre

Thank you. Very good video, if I understand I only use PTT when I talk to ATC. All the rest is direct (no PTT). If this is the case and please confirm, this should solve my problem. Many Thanks Pierre

Thanks I did red that document, but i was looking for a actual flow example, like a tutorial. I am having difficulties exchanging with GSX, I do get the greeting. After that sometime I get a reply if I say ´´cockpit to ground’´, it will ask me what i want, but when i ask for example ´´please send cathering’´ nothing happens. Stupid question, i do need to use the Push to Talk key, to communicate with Gsx? Pierre

Hi, Does anyone know about a good written procedure on how to interact with the GSX ground crew. A flow that will tell me what to say and when. After 3 weeks of trying to get MCE-PF3-P3D 4.4 to work together I am now struggling with the proper phraseology to be use. A video would be ok, but I would prefer something on paper. Thanks Pierre

Ok thanks

I was just looking at the PMDG 777 and I do not see in the FMC option-> simulation the option CTL INPUT WITH AP ON. Does it exist? Pierre

Ok got it know many thanks Pierre

Which manuel are you looking at? I was looking at the PMDG 747 Queen of th Sky II. On page 100, i do not see any options that will help me? So which one are you referring? Pierre

Thank you Kyle, I have a Cirrus ii and a Thrustmaster joystick setup. I will review my axis assignement carrefuly. Pierre

Ok i will try to solve the hardware issue. Just to make sure, this is related to the fact that i do not have a long enought null space define in my elevator setting? Pierre

Hi and tanks for the help. I went back to the documentation and in the simulation options the only one that make sense is the r Realistic AP engagement to be turn off. I dont see any other one. Pierre

Hi, I had this problem before with the 747 and the 777. I do not remember what options in the PMDG setup menu I had to change. Can anybody help? Pierre

Hi, I found the problem, it was the Realteck audio driver. I un-intalled the driver and now i use the window default one. I reinstall MCE lastest version and now i have a co-pilot. Thank you for your help.

Thank you for the info, Last night I suffer from a Win 10 crash and I have to re-install my PC. So it will take me a few days to do that and start testing Multicrew experience again. Will get back if I still have problem. Pierre

Thanks you for the reply, I have check what input and output devices MCE is using, and everything seems ok, https://drive.google.com/file/d/1-Se3XD_SeZsPbTxecEpb2zD_pFSvIIam/view?usp=sharing As you can see the output and input device are map the same way in P3D and MCE. I also ran the assign sound device. https://drive.google.com/file/d/10p052WwMPDmpYj2YKPkvNU0gWa5xY9kP/view?usp=sharing I have test my microphone with the Speech Recognition utility in window control panel and the microphone works. When I start MCE I do hear the introduction, then I hear the ramp coordinator (I have GSX). When I push my PTT assigned button I do hear the static noise, But when I say "start preflight checklist" or when pushing my PTT button I ask "dispatch please send catering services" I get no action. Very weird Pierre

Hi, I just installed the new version of MCE 2.7.9. When I start P3D 4.4 and MCE. I get the message "copilot Listening ...on Boeing B77L" but when I ask for "Preflight checklist" nothing happens. I cannot talk to the co-pilot. I know my microphone is working I ran the "app wizard" and everything was find. It's been a wild since I use MCE, but should I get a welcome message from the co-pilot? https://drive.google.com/open?id=1ZFZo54ZmL64XExI7rnpnIwtXWqi7EOGT Any help would be appreciated Pierre

Ok you can close this ticket, to solve my problem had to disable the external view system of the plane. Thanks Pierre

Hi, I did some more test and I found that when P3D load the Airbus319 professional the default view is from custom/ Outside (chasePlane) views and not from cockpit/ on-board (chaseplane). see picture https://drive.google.com/file/d/1Gu5NjUGci8D2-D2726be91cG3wOIkGrG/view?usp=sharing When P3D normally load a plane the default view is from Cockpit/virtual cockpit view. So I guess with chaseplane it default to cockpit/ on-board (chaseplane) view see picture 2 https://drive.google.com/file/d/1COfB8SSdIcP6jhlz6My58KY6ELPV0-0r/view?usp=sharing How do I make P3D load the cockpit/ on-board (chaseplane) view when loading the Airbus319 scenario? Any help would be appreciated

Hi, Just got ChasePlane installed, what a impressive add-on. Thanks. I just have one question: I am practicing creating preset for the Aerosoft A319 professional in P3D v4.4, I have created two on-board views one called pilot and the other one called Pedestal. I can toggle from one to the other one ok, they are both cockpit views. But when I load the aircraft scenario in P3D, ChasePlane defaults too a view that represent the passenger area of the plane. I didn't create that on-board view and it doesn't show in the list of on-board view in Chaseplane. I would like to have the plane loading the pilot on-board view as a default and delete that passenger view if I can. I also created a preset for the A2A 172, and I didn't have that issue. Everything look great Pierre

Thank you

When I do my upgrade I un-installed each modules and then install the new ones. In the upgrade package from Prepar3D, there is no MSI for the module Prepar3D V4 Professional. I see one for the client, the content and the scenery. How do I get the one for the ''Prepar3D V4 Professional''. Thanks for your help Pierre

I just completed the upgrade for 4.4 successfully. When I verified my P3D package version in control Panel-Programs & features I see that the package name: Prepar3D V4 Professional is still at version 4.2.21.24048. All the others are upgraded to 4.4.16.27077 (Prepar3D v4 Professional client, Prepar3D v4 Content & Prepar3D v4 Scenery). Is this normal? Pierre

Thanks you for the reply, Just want to make sure, are you using a PFC cirrus ii? If yes do you load in the module folder of P3D 4.1 both the PFCcom64.dll and the FSUIPC5.dll but you only use the FSUIPC for calibration? or you only load the FSUIPC5.dll and calibrate with it? Pierre

I am using a cirrus II console and i am wondering what utility people that have the same equipment are using for calibration. Are you using PFCcomm64.dll or the FSUIPC5.dll? Or even both. Pierre