Olli272

I noticed in the video, that with „HT off“ the GPU load is way higher than with „HT on“. So maybe P3D is shifting more load to the GPU when it has less CPU threads available, and the GPU handles this load actually better than the CPU?!

I have to admit that I also really miss those beige fur seat covers, as I think that they (would) add a lot to the appearance and atmosphere of the 747 cockpit with its typical warm, brownish colors. And I really can't understand why PMDG didn't include them, as the large majority of 747-400s seems to be equipped with those seats, judging from all the cockpit photos of various airlines. Yes, I know, that's not a proof, but the fact that I could hardly find any photos of the grey seats on a 747-400 flight deck but hundreds with the beige fur seats somehow speaks for itself... So much for "realistic airline options". :wink: Already asked about it during the beta phase, but unfortunately no response.

Hi Kyle, thanks a lot for the video showing the plethora of options! :smile: However, there's one option which I miss... :ph34r: It's the option of changing the type of seats. - Honestly, from all the real-world 747 flight deck photos and videos I've seen so far, I've almost never seen the seats with those grey cushions which are modeled here. In my personal impression, the large majority of 747s is equipped with the rather beige, fur type of seats, of which I think are typical for the 747 and adding a great deal to the overall impression of the brown-beige colors and atmosphere on the 747 flight deck: http://www.jetphotos.net/photo/8411747 Here's a nice side-by-side comparison of both within one flight deck: http://www.jetphotos.net/photo/8382690 However, I have the feeling that 99% of 747s are equipped with those: http://www.jetphotos.net/photo/8276769 Are there any plans to add those seats as an option as well? :rolleyes: Best regards Olli

Hi guys, one question: One the HiFi website it says that AS16 needs P3D version 3.2.3+, but I'm still on v.3.1 and currently don't have the time and nerves to mess around with updating P3D. So, does it really not work with v.3.1 at all? Anyone maybe tried it? Thanks a lot and best regards Olli

Have you been able to resolve the issue meanwhile? Or does anyone else have experience with using a migration tool (for sceneries) and PMDG planes in P3Dv3? Just asking because I just recently switched to P3Dv3 and I am planning on using the EMT tool for installing Tongass Fjords X while I'm also about to buy the P3D versions of the NGX and 777... Kyle, are these problems somehow resolvable (without uninstalling everything) or is it generally not possible to use a migration tool before or after installing a PMDG product in P3Dv3? Thanks a lot and best regards Olli

Thanks for the hint, I'll give it a try.

I have the same problem with Reboot (and sometimes also with the 777). Been using Legacy NGX and the Dash8 voice versions ever since without any problems. Then with the 777 I already noticed some recognition difficulties which sometimes even lead to unwanted mode changes. The 777 often understands just "STOP" when I say something totally different. Now with Reboot it's even worse, at least for the first half of my test flight, it kept understanding "UP NO LIGHTS" no matter what I said... :mad: And again, I've been using Legcy NGX and Dash8 without ANY recognition problems... :unsure: Anyway, I think that Reboot is really the best FS2Crew ever!! (And I do hope, that some of the nice little new features are ported over to the 777, which always seems a bit "boring" to me... :ph34r: ) Best regards Olli

Great, thanks! :smile:

No mention of the -8F yet... I hope this will also be done? :ph34r: And I still did not really get whether the -8 will be an expansion to the -400 or a separate product, as it appears from Robert's last update that there are two seperate teams working on the two versions...?! :huh: Anyway, the screenshots are looking fantastic! B)

Two little questions in regard to this: 1. Will the additional FO voice sets that come with Emergency NGX also be included in Reboot? 2. Will the abnormal procedures again only work with the AU voice set? Thanks a lot, looking forward to Reboot! ^_^ Olli

You can manually back-up the AIRAC files. Just go to your FSX main folder, open the PMDG folder and then copy the NAVDATA and SIDSTARS folders to a temporary location, so you can paste them back after reinstallation.

Thanks a lot for the update, Robert! One question regarding the "DVD solution": I am a DVD customer but I don't want to use the FSX:SE version, just the "normal" FSX version. - Will there be a Service Pack available for the old FSX version (without FSX:SE), or do I have to wait for the alternative solution including FSX:SE even if I don't need SE-compatibility?

Excellent news to start the new year!! Thanks a lot Robert for the update! :smile: ...and a happy new year to everyone! :Four Leaf Clover:

That's good news! Thanks!

Just completed my first test flight. Let's say it's a solid FS2Crew product, but somehow nothing special about it, and seemingly even less detail and functionality than in previous products. Like the lack of functionailty connected to the audio panel, missing push back, missing de-icing prodcedures, ... Okay, I know, for the latter two there will be UGCX coming at some point in time, but since that might still take a couple of month, it somehow impairs the first impression of the 777 FS2Crew... Also I agree with Peter in this point: So in conclusion... 1. Some basic standards like with the NGX: Audio panel needs to be set-up properly for talking to ground/FA/PA (maybe just as a CFG option) and PA button on the audio panel opens the FS2Crew PA panel. 2. Some long-haul specific things like Oceanic/ETOPS procedures, e.g. a simulated Selcal check by the FO. Anyway... keep the good work up, Bryan - and make it even better... :ph34r: ^_^

Thanks a lot Robert for the comprehensive update!! :smile: Still two questions remain for me :ph34r:: 1. Which 747 variants are planned for the initial release and which for later expansion packs (if any)? I'm asking with regard to the -400F, -8 and -8F. 2. Any plans for a 777-200ER?

At the bottom of the last post on the first page of this thread you will find the current link to the .xlsx verison of the file.

I'm also looking for a good ATC add-on with regional accents and think PFE would be the best in this respect, however I found on an other thread here on AVSIM that there are quite some disadvantages of PFE. The biggest issue seems to be a very cumbersome configuration and usage. Before each flight you need to convert and load your flightplan into PFE, then define the departure and arrival runways and manually program the SIDs and STARs, etc. Also PFE seems unable to adapt to changing wind direction at the arrival airport, at least when using a third-party weather engine. These are the reasons why I'm still hesitating to buy it... In general, ATC Add-ons do not seem to be quite popular. Searching for PFE on youtube I could hardly find any videos showing it in action. And it seems there are a couple of ATC add-ons each having their specific advantages but all of them also having some severe disadvantages making them a no-go for me... :unsure:

I am looking at a quite similar configuration for my new machine, so I'd be happy to hear about your experience with this...

Just came across this thread by coincidence and happened to find what I've always been searching for... a good and non-robotic ATC addon - PFE! :biggrin: Absolutely didn't know PFE before and wanna buy it instantly ^_^, however... WHERE?!?!?! I searched at Aerosoft, simMarket, FlightSimStore, no PFE anywhere... And I even didn't find some type of official developer's website for PFE on the first Google search... :huh: Can anyone help?

I'm also just thinking about upgrading my FSX to the new products. :huh: Currently I am using no mesh add-on, GSX (Europe, North America), UTX (Europe, USA, Canada, Alaska), REX 2 (+ ASN) (and the FTX NA regions). What I am considering now is to switch to FS Global 2010, FTX Global, Vector, openLC (when available) and REX 4 (+ ASN) A major investment of course, so my main questions are: Is FSGlobal 2010 mesh really worth its price? I also had some doubt when looking at the comparison screenshots... How about the DX10 compatibility of FTX Global? I am using DX10 mode now in order to prevent OOMs (was lucky enough to get Steve's DX10 fixer couple weeks ago... now it isn't sold any longer for whatever reason :blink:) Since uninstalling GSX, UTX and REX 2 and then installing all the new products is a major change to the FS installation, I am afraid this might somehow brake my FSX so I would have to reinstall everything from scratch?! :unsure: I'm wondering if I should keep UTX Alaska and somehow combine it with the FTX Global products, since UTX Alaska seems to be very detailed and hence might be more detailed than FTX Global?? Maybe anyone has some experience to share in regard to these questions?! Thanks a lot! :smile2:

Hey 777 experts out there, I was just wondering about the procedure for rejected takeoffs, with regard to the speedbrakes. Found this video of an RTO in a 777 Sim on youtube. At 1:11 an engine failure occurs and the captain does the following: 1. pull the thrust levers back to idle 2. deploy the speedbrakes 3. set reverse thrust. That's also how it's written in the QRH. But now I coincidentally found that on the PMDG 777, as soon as you pull the reverser levers, the speedbrake will automatically open. So now I'm wondering whether this is the real airplane's behaviour (and since it is PMDG, I believe it is :wink:) and why do you first manually set the speedbrakes and then the reverse thrust, when the speedbrake would automatically deploy on activating the reverser??? Maybe anyone can shed a bit of light on this? Best regards Olli

Thank's a lot for the update, Robert! :smile: One question, if it's allowed... :ph34r: Will the SDK be released with the SP1/300ER? - Just asking because I'm eagerly waiting for the 777 FS2Crew... :rolleyes:

Wow, that's one interesting move...! :rolleyes: But glad to hear that I do not have to wait that long for the Button version if it comes together with Voice... :good:

Just did a test flight with the trial version of ASN and I will definitely buy it. Really impressive! B) Though using the same REX textures as before, I got the impression that the clouds and whole atmosphere is looking really totally different (and much better) than before. And for the first time I noticed a bit of turbulence on the 777 even though the wx conditions were actually not that bad. Winds and turbulence simulation also seems much more real now. I had never thought that ASN would take simulation somehow to a new level, but it really does! :good: By the way, will the 777 SDK be released together with SP1? - I'm asking because of FS2Crew... can't wait to have my first officer in the right seat. :wink: