Hoang

Just finished a flight with B748 and I was thinking to try again the 777, of course...it slaps me in the face immediately Thrust LIM page, stuck with 100% take off power, cannot change anything except CLB 1 and 2. Was ok before the latest updates, so frustrated, I think I'm done with it

Paid 70$ and never had a normal flight without issues. Yes, we are too easy with our money nowadays.

I know they are talking about the engines not wobbling but wow.... the whole airplane does! I thought I'm going to have a good time with it after this release, probably not...

I dont know why, but I laugh so hard

Hello, Is there a place on the Internet to find the daily use SIDs and STARs and the runways at certain airport? Lots of airports have many runways, SIDs, STARs but in real life only use couple of them as main. For example, my local airports can have 2 pages of approaches but use mainly couple of them for each runway. Just want to be as real as it can get. Thank you

I used FSlabs product to study my initial training of the A320 family. After several years flying the real one, I came back and raised my comments/suggestions and report the errors which could make their product better. To my surprised they don't care, no reply at all. So either they are happy with it, or they too confident with their beta testers.

Hi, I gave him the link to this post and it depends on him. 1. His email address is at Simmarket product page "DUCPHAMPHOTO@GMAIL.COM" 2. I will pass that to him, thank you. 3. I will tell him about this and see if he can make any changes, at least next release Da Nang Intl Airport has this fixed. 4. I'm the beta tester for P3D V5, I took all the photos in V5. He only chose the dusk/night ones and the day time photos he took by himself in FSX so that he can have pictures from all platform (FSX and P3D). I will discuss this with him. 5. He is improving as he continues, there are still couple of local airports he wants to finish first. After that he will come back and upgrade the bigger ones. After he releases Da Nang (which will be very soon) and Cam Ranh Intl airport, he will be back and do VVTS pretty much from scratch to have better quality. 6. Thai Creations have been silence for years. Flying Bear Studio is now a busy airline captain, we are asking him for support, hopefully he can remember some skill from his previous releases. Thank you so much for your information. Upcoming release is Da Nang Intl Airport

35% off. Would like to ask for some reviews on their products. I have most of it and planning to get KORD and LGSS. KORD probably the only updated one for P3D. Geneva is very cheap so how is it comparing to Aerosoft’s?

It’s too outdated anyway. WF will release a new version of ZSPD real soon and from their VHHH, I can say we not going to be dissapointed. Yeah...it’s payware, but cheaper than FSA.

I doubt this will be free. More likely going to be version 2 of LFPG with upgrade fee for V4 customers.

I've been using the V4 version for my V5 setup and it's very good actually, wonder what they are bringing to this update.

I can confirm uninstall P3D scenery and reinstall it alone solve the problem. Now I need to test if it affects my addon scenery. Thank you for all your help. Very weird really.

I will do it now, I don't know if it is going to do any harm to my addons but I'm out of ideas. Will report the result later. Yeah...but I've never installed any of that into my V5, onlly Pilot's for my V4 but I removed that with V4 very very long ago.

Thank you, I tried but it seems the source of the problem is from somewhere else.

Thank you! I already disabled all ORBX addons into my simulator and the problem still there, so I believed it's not ORBX related.

I'm doing all your steps above and remembered I have installed FSGLOBAL Mesh with my V4 before, but I uninstalled and removed it completely along with V4. Can it somehow have some files into this V5? Going to my Programs and Feature in Window 10 I found Prepar3D V5 Scenery is separated from the installer, can I uninstall/install only this part of the simulator? Does it affect anything to my addons?

Thank you, yes the settings in ORBX Central was kept default and it is bottom after the 1st addon scenery. However I already disabled all addons including ORBX and the problem still there. I'd be amazed if this problem is from ORBX.. Anyway, one of my ORBX entry has purple color which is incorrect path, however I double check and it is correct? Anybody using ORBX can confirm this for me? And this default 0907 one is in light purple, I went there and the bgl was renamed .bg_ .

Vector for P3D V5 does not have AEC anymore so I'm not sure how to deactivate only this area. However since no others have the problem, it should be something wrong on my side. I accidentally notice this only after I install scenery for Albuquerque (which includes Simwest). I deactivated and removed all of them, now only runs default and it still occur. I've never installed any mesh addons for my V5 setup so I'm looking where that mesh coming from. Thank you so 100% sure it's on my side. Thank you, no I've never installed any mesh addons. I will try to disable ORBX now Thanks, I tried but it didn't solve it. UPDATE 1: I disabled all my scenery addons. The problem still there. Scenery.cfg is fresh new without any additional entry.

Hi, I'm not using any mesh, just the default one with the addons I mentioned above.

I have reported "some" errors with the FSLAB products and of course, silence, has been like that for years. It's good, but it could be better if their support is on par with their quality.

Purchasing the 200ER extension is quite an innovation to me. Before that I would buy the product with the idea in mind that it will be as great as others from the same developer (instant buy without doubt). However, from now, I'd just chill and wait to see the reviews. Not happy with this purchase at all, I have tried my best to fly several routes with new 777s (200ER/300ER), couldn't hand fly it happily, during climb or descend, as long as I release my control the planes started to go all over the place. Too sensitive and slushy. I should have tested the base package before purchasing the 200ER extension, I was too rush. Now all we can do is just wait and hope for a good customer service from PMDG. At the beginning of the release, I monitored closely their forum and was very unhappy to the way they treat the customers who reported errors (almost denying every single post). After the enormous reports they probably realized indeed something was wrong.

Default scenery with ORBX Global + Vector + openLC NA in P3D V5. Anyone has this problem?

looking forward to it cheers

Thank you, I will look into it, I don't really have the habit of closing the applications on my window. Just leave it there until I shut down the computer

After following all of your suggestions, I managed to get pretty high (example KATL Atlanta from ~20 to ~35-40 FPS) except for EGLL London area, I guess it's a no go for me to that area. So far the overall quality of the sceneries still very good to me with the lower settings. Thanks again for all your help, due to the "bitcoin" era I could not get a better GPU with reasonable price. Hate it so much