clive6354

Thankyou for your reply which is as expected. I was not sure if i had missed anything

Hello, I have my Hotas Warthog throttle switches assigned to PMDG 737NGX. I wish to export these setting to the FSLABS A320X. I have selected the FSLABS A32X module and copy from existing aircraft, then create. No settings have appeared in the listing when I select the A320X. Please can you advise Clive Alexander

I only use comments made on this forum and other forums as a guide as there are many amateur proffessionals but at thesame time I value and respect comments Clive

Thank you all for your comments. I was excited to find that I could obtain a new GX 1080ti for approx £500 but all your comments have saved me money and disapointment, thank you. What if I sell my existing system and purchase a new system (i7-8700 with an GTX 1080ti) that is compared with i7-7700 and GTX 1070

Thanks for the reply, therefore would you say that the performance increase is not worth the upgrade? Upgrading my processor would be better?

Hello I am trying to find out the experience of someone who has used an I7-7700 processor and 4K monitor with a GTX 1080 Graphics card upgraded to a 1080ti with PMDG aircraft and is pleased with the performance increase in relation to cost of upgrade. I have the opportunity to upgrade from GTX1080 to GTX1080ti (Asus Rog Strix 11GB) for approximately £500. I would be interested to know if the performance increase between the two graphics cards warrants the £500 cost Clive Alexander

Hello where do i find the d/load link for LINDA V3.03? I wish to use LINDA with P3dD v4.2 and require the latest version so that it recognises and finds my FSUIPC settings Clive Alexander

OK this is getting silly. The present situation is that I can get chaseplane to work in P3D v 4.2 but the interface does not load it freezes on the initialisation window. I decided to uninstall until I can get technical help. I restarted P3D and ChasePlane began to work including the interface. Can someome please explain to me what is going on and how I can resolve this situation? I think it may have something to do with simmconnect

I had expected that chaseplane would load independant of P3D but no Joy. A member of this group suggested loading P3D and then Chaseplane. I tried this and to my surprise it worked. I closed P3D and ChasePlane and then attempted to load Chaseplane independently, this time it worked

Thought I had resolved the issue but the same thing has happened again. I tried to uninstall as before but this time no success in getting it working again what is happening?

resolved.I deleted the software also cleared registry of chaseplane entries. re-installed and all ok

hello I attempted to start chaseplane in P3D v4.2 but the initialisation appears to freeze. I have re-installed the software without success. Please can you give advice on how to resolve this issue Clive Alexander

Hello Is it possible to operate PMDG aircraft with a touchscreen monitor? I am interested in a TouchScreen monitor 28" 4K but it appears these specifications are not possible, is this correct? Clive Alexander

Hello is it possible to use a touchscreen monitor with pmdg aircraft? Any reccommendations? It has to be 4k. Clive alexander

Thank you all for the information

Hello How is the IRS aligned in the Maddog X I cannot see an IRS alignment setting on the overhead panel Clive Alexander

do you mean that you assign buttons on your Joystick for left, right and centre movements of the rudder? My josytick is Hotas Warthog, Use the left and right axis for the ailerons , therefore would have to assign buttons or hatswitch for the rudder Clive Alexander

Thank you for your helpful reply I have try to resolve problems by re-calibrating but when operating the rudder pedals the rudder appeared to have a mind of its own and was not stable at all. After editing and clearing any corruption in the registry file the operation of the rudder pedals was better, I will have to do a few more tests to be satisfied, maybe calibarating the null zones more precise will improve operation. i will have to seek a tutorial on how to calibrate the rudder pedals within FSUIPC as I am getting confused with setting the centre position and null zones. I am probaly making a simple task more difficult than need be. I have linked into the Saitek site which has a support forum and also some very useful information which I am reading. Clive Alexander

Hopefully I have resolved the problems I was having with my "Saitek Cessna Pro Rudder Pedals" I edited my registry file, clearing any conflicts with previous setups and also deleted my P3D config file. Working better at the moment but have to do more tests to be satisfied as I think that the rudder pedals I have could be better

When I setup my rudder pedals within FSUIPC. I assign the left and right rudder movemnt to the rudder command, however I am having difficulty centering the rudder. The rudder althjough moving appears to moving at its own command and when I release the pedals the pedal levers are not even. I have mislaid the CD containing the drivers and calibration for the Saitek Cessna Rudder, is this what I require?

Thanks for your reply. Would setting rudder pedals be best using FSUIPC or the internal setting within P3D?. Of course. if set up in FSUIPC I would have to delete the ruddet setup inside P3D cobtrol settings

Hello When I steer the 737 should I use my rudder pedals to turn the aircraft on the ground or do I have to set up nose wheel steering using a Tiller setting within FSUIPC Clive Alexander

Thankyou....No the aircraft was not highlighted...silly mistake

Using LINDA I am having problems with my Hotas Joystick and throttle recognising the switches as I push them on the respective controllers The configuration checklist is reporting OK for all devices and FSUIPC 5.100 I have my aircraft selected and Synced What have I missed or what has gone wrong, any ideas?? P3dv4.1 Clive Alexander

Thank you for the replies As I have the Hotas Warthog throttle and joystick I have also started to have a look at software named LINDA to assign my settings. Although LINDA requires FSUIPC from what I have read LINDA provides more in depth control Clive Alexander