AFL581

Dear Umberto,

As you suggested , let's :

1: Move back to FSDT forums
2: Stop the argument, we both have better things to do, like for exemple solve this issue that unfortunately I am not the only one having.
3: Yes I said " little"  which is not ZERO and never implied such a thing ... again  I do understand you have thousands of issues to solve , but sometimes a customer can expect a little friendlier experience, please do not take it personally because it is not.

Thank you

Dear Umberto,

Excuse me, but where is the issue ?

You and I are in Europe, which, as far as I know allows free speech and I am just looking to solve an issue that maybe I am not the only to have.
Who on earth do you think you are for telling me not to write here ?

I never said that there was lack of support, I said that for such a big player in the sim world, just having the forum for support and not a direck ticket system for paying customer is a surprise , once again I am not saying you are bad or do not provide support, I am just giving my opinion, which I am allowed to give.

I really like and support your company by buying ALL of your products and NEVER had an issue in more than 12 years of ownership which is great and I did always provide positive feedbacks when it was due !

Being a grown up is being able to take criticism and not go on a forum telling someone to " stop speaking " because you disagree, and please read back , I never said virtuali or FSDT did not provide support !

Have a nice day !
 

I remove the antivirus completely and turn off all the windows protection and still have the same issue.

What is weird is that this appeared after installing Basel ... Before that I have never had an issue.

Hi,

Thanks for your reply.

Yes of course, I have tried everything I could before posting on the forum ... I just ran out of options and apparently I am not the only one having the issue.

TBH, I am a little shocked by how little support they give you while you own their entire product library ...

We are all exited about MSFS2020 for sure but please let's not forget that it will be heavily bandwith dependant and will consume a lot of data to operate.

People with slow internet speeds or data caps might still have a better overall experience with a good P3D setup.

Do not wait for the " next best thing " ... there will ALWAYS be a next best thing.

Hi guys,

I was wondering what is the issue with P3D 4.2 , I get " This device cannot be used on current aircraft " with VAinterface 2.25 and the PMDG NGX.

Thanks ! 

 

Hifi keeps the program curent and TBH it fits my P3D very well, does the job without the feeling of it being a nuclear powerplant operation.
If I recall correctly they updated it for P3DV4.
What would you like to see/have that you do not have now ?

Cheers

Hi guys,

Does anybody else have some elevation issues again with Vector ?

Did a quick flight arounf KTNP , 29 Palms , and I have the " Ilsland effect " or " Platform effect " again ... With or Withoutr the Airport Elevation correction.

All the best

16 hours ago, icemarkom said:

Ahhh! If you are close to the pole, you may need to change the magnetic reference you're using! What aircraft was it that you were flying? Then again, this looks south enough to not matter...

You are right, it's not an easy region to fly in ( Got RW King Air time there ... ) however, the 738 doesn't have the TRUE north option , the BBJ has ...

I updated the to the latest data from Mr Sors and it solved many issues.

2 hours ago, skelsey said:

If the airport scenery is not in the right place, Herve's update linked above will not fix it.

I know , default P3D Airport ... Not much I can do about it, I was thinking that the proximity to the magnetic North pole might have something to do with it.

Anyway, I'll just live with it , no big deal ;)

18 hours ago, branks737 said:

Try this website

https://www.aero.sors.fr/navaids3.html

I use it to update navaids, ils etc.

 

Branko

 

I guys, I have used this before and it did correct a lot but apparently not everything, I guess it is just a PC sim after all ;) so , let's live with it .

7 hours ago, icemarkom said:

What approach did you fly?

I flew the ILS34 into CYFB.

On the approach chart, waypoints " BILKU " " TIBEG " and " ONGAT " should all be alligned with the LOC, However in the sim , I encounter a fw degrees off.

I do have them all.

I would not recommend you moving anything over from V3.4.

Did you un-install all your previous products before installing the new ones ?

Good evening ,

Just installed the latest installers on a vanilla P3DV4.

I flew a " delivery " flight from KBFI to CYFB and noticed both times that the waypoints that should be on the RWY extended centerline do NOT line up with the latest but are a few degrees off.

I checked before flight , the database was Navigraph 1707.

Is there some file I should update ?

Is it a known issue within the Sim and should I just ignore it ?


Thanks for your feedbacks .

Looks good , almost photo real ;)

Hi Dane,

TBH, I used it for all the previous versions but once I installed the V4, I just forgot about it and never realised that it was missing ... I think V4 looks great with the right settings applied in the user interface.

Just my input ;) I'm sure others will differ but ... so far , so good :)

Cheers

Did you guys get access to their website, it seems to me like the bandwith they have is very limited.

It is " official " that they simply say to point the installer to P3DV4 ?

Does anyone know if they will really port their products with the P3DV4 SDK and recompile at all ?


Thx

54 minutes ago, jetsmell said:

All the controls are ok.

 

Dan Longano

Do you have a joystick/yoke and is it properly calibrated ?

I have had the issue when on my CH Yoke , there were 2 yoke axis programmed for the rudder and they canceled each other out.

 

25 minutes ago, jetsmell said:

I installed the Queen, 737, and the 777. When I go to take off they will roll down the runway to about forty knots, that's it. The screen shows full power and the brake is off.

The other planes in the hanger are not having this problem.

 

Dan Longano

I assume that during the before taxiing checklist, your flight control check is OK and everything moves as it is supposed to be ?

Try re-running the T7 installer with the " repair " option , otherwise loose the few minutes needed to completely reinstall ... it is usually more efficient than trying to fix a single corrupted file.

Good luck

1 hour ago, grandfred29 said:

hello pmdg team

may i ask you if you plan to add this effect on your planes wtih p3Dv4 ?

Thanks

Are you refering to this Preciption Windshield Effect lua script found in P3D V4 folder ?

Between the two , HDMI but look for Display Port if you want the biggest data transfert rate.

JB

Please get on our forums by following the instructions in my sig or on page one of the manual.

 

That said, try making sure you're running the sim as an Admin (right click on the icon and choose run as admin).

 

Make sure your AV is not flexing it's muscle(s) on the P3D directories.

 

Make sure that you installed the 737 prior to updating.

 

As well, it would be worth noting that P3D 3.2 has been out for exactly one day and you're expecting everything to work in it.  The sales page has clearly NOT been updated to match that as it JUST came out.  You're a tad hasty with your disputes... 

 

Did you check your navigraph settings?

 

Do you have the estonia tool installed?

Yes , I did check everything.

Fair enough, you are right and I will give you time to have a look at this.

I did modify manually the pannel state and did get the 737 to work if the FMS is not in the pannel.

However, as soon as I try to use it with the FMS, it is a straight CTD without even loading the airplane.

Strangely enough, WIN10 does not log this event ...

regards

The Changelog wasn't included in the build.

 

I will see about getting it posted.

 

Turns out that if you're using windows 10 and P3D 3.1+, the FMS version of this product might not work properly unless your permissions are set properly.

I do indeed use Windows 10 and P3D V3.2.

Could you please advise on what exactly needs to be checked/changed in order to make sure that it works fine ?

Thanks for your support