Japo32

Thanks for all the hard work, and hope good future to you.

P51 Civ

rain here ok.. no snow on windshield.

ahhh you are right! it has to be new addition as I saw it 2 days ago or so and didn't see it. Thanks! Now need to wait for the A2A update to allow FSEconomy, Airhauler, etc simconnect issue solution.

how do I put the comanche inside Neofly? I have the option to add new planes, but when loaded in the sim I cannot fill any num of pax area and don't find any send button

yes, fun

I am waiting for a better performance in VR. I am having 20fps or so with a 9900ks and a RTX 4090 with a Varjo Aero and Reverb G2, medium graphics configuration, while I don't have any issues and all is buttersmooth in other sims. Hope this can be solved in near future.

ok.. it is here: (1) Pitch Latch Propeller walk-through on the Kodiak 100, Series III - YouTube To latch the propeller into a flat pitch you need to follow proper procedure. If you don't you will be stuck with the propeller running in fixed pitch and break your engine, so read carefully. To latch the propeller before shutting down the engine, put the power lever into beta range -without feathering the propeller, of course. Then pull the condition lever to cut-off and the propeller will be locked in a flat pitch angle. >To unlatch the propeller start the engine normally -you will notice it begins faster now due to the prop pitch being fine. Once the engine is started, move the power lever to idle. Next, move the propeller lever to feather and immediately unfeather the propeller to release the locks. Why immediately? Because you don't want to wait 20 seconds for the prop to cycle to feather and back. The feather-unfeather sequence serves only to unlock the propeller, so you don't have to wait for it when you're in a hurry to leave.

I read in an email that there is a new way of starting the kodiak in this new update. But I have lost the email and I don't find any information on documentation (would be nice to add the version number we have installed any place) Can someone put a little of light here please? thanks!

What a difference between this software and Vaicom for DCS. Same situation, but in Vaicom he released all the source code for free in Github and the community made the changes to have it working again. Would be an exit for him if he don't want to work in his product with a donation adress for him.

The Fun factor. That big forgotten.

nobody knows?

Sorry if I am wrong, but this plane also use the GTNs? The 3 in the center I have seen people with some buttons grey out and others with them functional.Does this need PMS50 to be bought or gtnxi.. or they are not necesary?

Hello! For prepar3D I had the GNS530 knobs working with my MCP Combo2 VRInsight. I tried to put the specific MSFS variables in it, with no luck. I mean the page and group ones (plus push the knob) has someone working this with the VRinsight with Linda? and how? Thanks!

Solved.. was the config-mcp2.lua that was corrupted. Removing it Linda generated the new one and that worked. Thanks to linda @ awginfosys dot net for the clue!

I don't think so.. I never used. Why if I never used it was working before, and now not?... I bought several planes and FSRealistic in this black friday... maybe those ones installed or modified something? (the Kodiak, the Chancellor 414, the FSReborn Sting S4, and the 145 helicopter) edit: checking out the installfsuipc7.log, yes.. it is installed: Installing FSUIPC7 WASM module in F:\FS2020\Community\. Create folder: F:\FS2020\Community\\fsuipc-lvar-module Output folder: F:\FS2020\Community\\fsuipc-lvar-module Extract: layout.json... 100% Extract: manifest.json... 100% Extract: FSUIPC_WASM.ini... 100% Create folder: F:\FS2020\Community\\fsuipc-lvar-module\modules Output folder: F:\FS2020\Community\\fsuipc-lvar-module\modules Extract: FSUIPC7_WASM.wasm... 100% Extract: A320.hvar... 100% Extract: TBM.hvar... 100% Extract: DA40-NG.hvar... 100% Extract: DA40 TDI.hvar... 100% Extract: DA62.hvar... 100% Extract: Skyhawk.hvar... 100% FSUIPC7 WASM module installation completed.

here is the log [MAIN] LINDA Version 4.1.5.289 initialising (@2211262110) ... [MAIN] LINDA can start ... [MAIN] Creating Forms ... [MAIN] Opening Splash form [MAIN] Opening Main form [MAIN] LINDA 4.1.5.289 GUI starting... [MAIN] LINDA 4.1.5 and MSFS 2020 running... [MAIN] Fonts added [MAIN] News added [MAIN] RemoveHiddenFiles - F:\FS2020\FSUIPC7\linda\libs\ [MAIN] RemoveHiddenFiles successful [MAIN] Aircraft Selector initialized [MAIN] Checking LINDA/FSUIPC Folders/Files ... [MAIN] -- Checking in F:\FS2020\FSUIPC7 [MAIN] Key LINDA/FSUIPC7 files appear to be correct. [MAIN] ConfigSysLoad() [DEFACFT= * MSFS Default] [MAIN] ConfigSysLoad() [DEFDEV=255] [MAIN] ConfigSysLoad() [FSXSYNC=1] [MAIN] ConfigSysLoad() [GLOBAL=0] [MAIN] ConfigSysLoad() [DEBUG=0] [MAIN] [LINDA] Saitek Display set to -1 [MAIN] HID OnArrival - 044FB68F [MAIN] HID OnArrival - 17A00310 [MAIN] HID OnArrival - 17A00310 [MAIN] HID OnArrival - 046DC232 [MAIN] HID OnArrival - 046DC231 [MAIN] HID OnArrival - 15320045 [MAIN] HID OnArrival - 046DC229 [MAIN] HID OnArrival - 15320045 [MAIN] HID OnArrival - 046DC229 [MAIN] HID OnArrival - 15320045 [MAIN] HID OnArrival - 15320045 [MAIN] HID OnArrival - 15320045 [MAIN] HID OnArrival - 046DC228 [MAIN] HID OnArrival - 046DC228 [MAIN] HID OnArrival - 051D0002 [3B1614X19538 ] [MAIN] HID OnArrival - 046DC228 [MAIN] HID OnArrival - 15320045 [MAIN] HID OnArrival - 0B0518A3 [00000000001A] [MAIN] HID OnArrival - 15320045 [MAIN] HID OnArrival - 13951000 [MAIN] HID OnDeviceChange - device added [MAIN] hidEmunerateNodes [044FB68F/0] [MAIN] hidEmunerateNodes [17A00310/0] [MAIN] hidEmunerateNodes [17A00310/0] [MAIN] hidEmunerateNodes [046DC232/0] [MAIN] hidEmunerateNodes [046DC231/0] [MAIN] hidEmunerateNodes [15320045/0] [MAIN] hidEmunerateNodes [046DC229/0] [MAIN] hidEmunerateNodes [15320045/0] [MAIN] hidEmunerateNodes [046DC229/0] [MAIN] hidEmunerateNodes [15320045/0] [MAIN] hidEmunerateNodes [15320045/0] [MAIN] hidEmunerateNodes [15320045/0] [MAIN] hidEmunerateNodes [046DC228/0] [MAIN] hidEmunerateNodes [046DC228/0] [MAIN] hidEmunerateNodes [051D0002/0] [MAIN] hidEmunerateNodes [046DC228/0] [MAIN] hidEmunerateNodes [15320045/0] [MAIN] hidEmunerateNodes [0B0518A3/0] [MAIN] hidEmunerateNodes [15320045/0] [MAIN] hidEmunerateNodes [13951000/0] [MAIN] [VRINSIGHT] = com4 com3 [-1] [MAIN] ConfigSysLoad() [SAITEK=1] [MAIN] [LINDA] Saitek Baro Reference set to 0 [MAIN] ConfigSysLoad() [BARO=0] [MAIN] ConfigSysLoad() [VAS=0] [MAIN] ConfigSysLoad() [RUNAWAY=1] [MAIN] ConfigSysLoad() [FAULT=0] [MAIN] ConfigSysLoad() [PATH_USER=F:/FS2020/FSUIPC7] [MAIN] ConfigSysLoad() completed [MAIN] [VRINSIGHT] = com4 com3 [-1] [MAIN] LINDA 4.1.5 GUI start completed ... [MAIN] FSUIPC Path F:\FS2020\FSUIPC7 [MAIN] FSUIPC ver 0.0.0 [MAIN] FS Path [MAIN] FS Ver [MAIN] LINDA GUI Main Timer started [MAIN] Opening Viewer form [MAIN] Opening Input form [MAIN] Opening Macros form [MAIN] Opening FSX Controls form [MAIN] Opening New Module form [MAIN] Opening Editor form [MAIN] All Forms opened successfully [MAIN] Opening Console form [MAIN] All forms created successfully ... [MAIN] LINDA application all set to run [MAIN] Splash Screen = true [MAIN] HID Dynamic = true [MAIN] ConfigSysLoad() [DEFACFT= * MSFS Default] [MAIN] ConfigSysLoad() [DEFDEV=255] [MAIN] ConfigSysLoad() [FSXSYNC=1] [MAIN] ConfigSysLoad() [GLOBAL=0] [MAIN] ConfigSysLoad() [DEBUG=0] [MAIN] ConfigSysLoad() [SAITEK=1] [MAIN] ConfigSysLoad() [BARO=0] [MAIN] ConfigSysLoad() [VAS=0] [MAIN] ConfigSysLoad() [RUNAWAY=1] [MAIN] ConfigSysLoad() [FAULT=0] [MAIN] ConfigSysLoad() [PATH_USER=F:/FS2020/FSUIPC7] [MAIN] ConfigSysLoad() completed [MAIN] TidyBackups - F:\FS2020\FSUIPC7\linda-cfg\system\ = F:\FS2020\FSUIPC7\linda-cfg\system\backup [MAIN] Clean Backups path F:\FS2020\FSUIPC7\linda-cfg\system\backup [MAIN] Clean Backups path F:\FS2020\FSUIPC7\linda-cfg\system\backup [MAIN] Clean Backups path F:\FS2020\FSUIPC7\linda-cfg\system\backup [MAIN] Clean Backups path F:\FS2020\FSUIPC7\linda-cfg\system\backup [MAIN] HIDSwitchDevice 1 [MAIN] [CONFIG] vriConfigLoad - path=F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\config-mcp2.lua [MAIN] TidyBackups - F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\ = F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\backup\ [MAIN] [CONFIG] vriConfigLoad - path=F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\config-mcp2.lua [MAIN] [CONFIG] vriConfigLoad - path=F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\config-mcp2.lua [MAIN] TidyBackups - F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\ = F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\backup\ [MAIN] [CONFIG] vriConfigLoad - path=F:\FS2020\FSUIPC7\linda-cfg\aircrafts\MSFS Default\config-mcp2.lua [MAIN] [VRINSIGHT] = com4 com3 [-1] [MAIN] [VRINSIGHT] = com4 com3 [-1] [MAIN] LINDA Shutting Down [MAIN] Fonts removed [MAIN] Closing Viewer form [MAIN] Closing Input form [MAIN] Closing FSX Controls form [MAIN] Closing Console form [MAIN] Console position data saved (formclose) [MAIN] Closing Macros form [MAIN] Closing New Module form [MAIN] Closing Editor form [MAIN] LINDA GUI Shutdown actions completed [MAIN] Terminating Application [MAIN] LINDA Terminated [MAIN] HIDDeviceUnplug detected - 15320045 [MAIN] HIDDeviceUnplug detected - 15320045

Now not... Hello. I don't know what I did, but it was working with all planes. Everything is updated and linda seems to be ok (screenshots from linda): LINDA 4.1.5 for MSFS 2020 (gyazo.com) LINDA 4.1.5 for MSFS 2020 (gyazo.com) but once the plane is loaded still the msg of VRSinsight MCP panel boeing 2 is as "Select your Aircraft and FLY now" it doesn't change to the numbers as it was previously. Any help? Thanks a lot!

End of November and from that wise words of the last msg in August, the SLC 1.6 update is right now at 95.00000000000000000001% The developer, what a cheek.

Ok.. now it is in the pocket... I had to click over it several times to make appear. There has to be some kind of little issue with that. Pd: the issue is that it has to be clicked over the top center black circle but as the pad has click spots over the full surface I click over them to make it appear. A suggestion is to deactivate the rest of click spots of the EFB while stored.

Hello! I just bought it and installed it. I click over the upper triangle glass part as seen in videos (no click spot in the manual shown) and it does nothing. I don't have EFB. Please help.

https://www.flysimware.com/FLYSIMSTORE/home/46-flysimware-cessna-414aw-chancellor-msfs2020.html

For me a plane that I can push the throttle for hours to the max in highest RPM without burning it, it is not fun even it flyies at the real one. Hope community tunes that.

Finally someone melted and several cables. Any cable can be melted. It is a mixture of bad design and user failure.