mokeiko

Can anybody help, I only have the Bonanza-Turbo-V3 folder in the community folder. I am unable to lift the aircraft off the ground. If I delete the V3 folder and fly the default G36 or any other default aircraft, I have no issues. I have the NXI G1000 installed via the MarketPlace. I have the latest SU5 installed. Thanks for any help EDIT: After a few restarts of MSFS, it got sorted. 🙂 fly safe

https://www.pcaviator.com/store/home.php?cat=1081 fly safe

The only idea I can come up with is make sure you are using the developer version of the A320. Also make sure the APU hasn't shut down mid start, it happened to me once. I've got N1 at 19.6, PSI at 278 on both engines fly safe

I never heard of this company before. I will check it out. Thanks Bob fly safe

I like the yoke very much, especially when flying with GA aircraft. The only time I’ve had to use Acronis boot disk is when you really messed up and couldn’t log into your PC, but you would have to really mess up and can’t boot into your OS. I could restore to any of my backup images with a few clicks as long as Acronis was installed in the OS, which it is on all of the images as well. I did try to use Windows backup a long time ago but there were times the restore points weren’t saved, might’ve been an error on my part. I may have to revisit this again. Thanks. The reason I bring up imaging software is because last night I installed some software and it installed three other bits of software even though I checked no or decline to the install. My PC started acting up, screen pixelated at times, flying was a stutter mess, etc. I didn’t have an image of anything since I haven’t made any so I am re-installing everything now, not really too bad but still an inconvenience. fly safe

When I was using Acronis I was able to make different images of every stage of install like fresh OS install, then OS and P3d, and kept adding more making sure to test each stage and activating the license before making another image. The issue I had was with one piece of software where even if an image was created even after activating the license, that software would not recognize it was activated and I had to email tech support and they saw it as a new PC, thus having to re-activate again. Tech support also insinuated I was installing their software on more than one PC. Another issue that popped up was even after creating an image like a basic fresh OS. When ever I had issues with that particular software like errors inputting flight plan, and try to reinstall the image of the fresh OS, it would result in the same errors. I then would resort to reinstalling a fresh OS via old method and not use the image, then that software would work. It took months for me to figure this out as I thought imaging software was foolproof. I’ll take a look at Macrium. Thank you fly safe

Hi all, What imaging software do you use to create backups. I used to use Acronis way back but stopped using it for a while. Thanks for any help fly safe

Thanks, I will take a look. fly safe

Event viewer shows this: FlightSimulator.exe 0.0.0.0 60c0b1e3 CoherentGTCore.dll 0.0.0.0 5fc6a9c9 c0000005 000000000062ebc8 16dc 01d77b775dedd25e C:\Program Files\WindowsApps\Microsoft.FlightSimulator_1.17.3.0_x64__8wekyb3d8bbwe\FlightSimulator.exe C:\Program Files\WindowsApps\Microsoft.FlightSimulator_1.17.3.0_x64__8wekyb3d8bbwe\CoherentGTCore.dll 22c0391e-7ff6-49dd-9fc8-923f9c92096c Microsoft.FlightSimulator_1.17.3.0_x64__8wekyb3d8bbwe App

Hey Bob, I had my antivirus (Viper) bypass scanning the MSFS folder, even had it shut down as I thought that might’ve been an issue. I will check again, perhaps the default MS antivirus wasn’t disabled as well. Thanks fly safe

I am trying to update through the simulator and always get a CTD after downloading only 1.8GB of 78GB. I tried over a dozen times without success and decided to uninstall and start from scratch. I downloaded and installed the app via my Microsoft store account, started it and choose my directory for the packages and get the same CTD at about 1.8GB only. The only thing changed was Windows 10 update. This leads me to believe it’s the MS servers? Thanks for any help fly safe

Thank you Greggy_D, I forgot about using this link instead. fly safe

300kb/sec download speeds. I should be ready to fly this thing by the 4th of july ☹️ fly safe

Totally agree. It seems these cards were meant for a different demographic other than flight simmers in mind.

Navigraph will probably integrate Simbrief into their subscription plan, hopefully with no additional cost. fly safe

My 3090 FTW3 Ultra has the "Red Lips". The fans do spool up and down on rare occasions and only when using certain aircraft in X-Plane 11.5 and P3dv5.1 which I can't understand. If I remember the Toliss A321 will affect the fans, but not the A319. The PMDG 777 will affect the fans but not the 747-8. I have no issues with MSFS2020. All other aircraft in either Platforms doesn't seem to affect the card at all. I got the extended warranty (5 years) from EVGA. I do have a 2080Ti and 1080Ti for backup in case of any downtown during RMA. fly safe

Thank you Grup fly safe

Can you share how you were able to install it in v5. I have a few airports in v4 version but don’t know how to get it to work with v5. As you mentioned some developers don’t have a timeline or will never make a v5 update. The installers all point to v4 which I don’t have. fly safe

I assigned a pause (example: key F10, or program a button to pause TrackIR) when I use the dials, then un-pause when I'm done. fly safe

rxpGnsSim32.dll didn't install properly due to my antivrus, I reinstalled and it seems to be working now. Sorry for the troubles. fly safe

delete

How do you power up the GNS? I got to the menu to turn on the window but the GNS is powered off. Thanks for any help fly safe

Please delete

Anyone have issues with some of the areas? I have the following installed with no issues: California, Washington, Oregon. I tried adding Utah and Nevada but they refuse to load. below is my scenery packs ini I just started using XP so I'm not sure if I messed things up but why would the first 3 work but not the las two. Thanks for any help. --------------------------- SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\Ortho4XP\yOrtho4XP_Overlays/ SCENERY_PACK Custom Scenery/Global Airports/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\Ortho4XP\Ortho_Utah_2018\z_ortho_Utah_2018/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\Ortho4XP\Ortho_California_v5\z_ortho_California_v5/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\Ortho4XP\Ortho_Nevada_2017\Ortho_Nevada_2017\z_ortho_Nevada_2017/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\Ortho4XP\Ortho_Oregon_2017\Ortho_Oregon_2017\z_ortho_Oregon_2017/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\Ortho4XP\Ortho_Washington_2017\Ortho_Washington_2017\z_ortho_Washington_2017/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+18-156/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+19-155/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+19-156/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+19-157/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+20-156/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+20-157/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+20-158/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+21-157/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+21-158/ SCENERY_PACK S:\Flightsim Applications\X-Plane Stuff\X-Plane Scenery\PhotoReal\Hawaii\zOrtho4XP_Hawaii_Islands\zOrtho4XP_+21-159/ SCENERY_PACK Custom Scenery/KSEA Demo Area/

Glad you have it sorted Ryan fly safe