Jump to content

User4355

Members
 View Profile  See their activity

  • Content Count

    47

  • Donations

    $0.00 

  • Joined

  • Last visited

Posts posted by User4355

  1. Posted · Edited by User4355

    Hi,

     

    Just brought the "aivaflightmonitor" and wonder is there a pdf - manual or has someone wrote some explanation for the graphs / parameters and how they should look like or how a nice approach would be..

    - Looking for some  guides / advise  on the "Raw Data Plots" parameters for Pitch / Elevator / touchdown zone ++ and how to analyze the graphs..

    🙂

    - Using the 737-700

     

     

    Rgd

    Jens Bobl

     

     

  3. Posted · Edited by User4355

    Hi,

     

    Now tried to reinstall/and cleanup as descibed above and seems like a huge step forward 🙂 🙂🙂, now the webfip work fine and there is also a url in the url-field :-), and desktop FIP`s which

    I have never used also now works(didnt work before when tried this just for testing). So for sure some has change after deinstall / cleanup.

     

    Anyhow, now it seems when I run the MSFS / AAO(as admin of cause) and Steamdeck that my steamdeck can get the feedback/values from the switch`s in the cookpit, meaning when I for exsample

    press the "seat belt" sw in MSFS the Icon on my Steamdeck update with new status, but If I press the switch("seat belt") on my steamdeck nothing happends in MSFS. Seems to be same behavior for all switchs. (kind of one way communication, chould it be some firewall issue?).

     

    To info,

    Now tried 3 different ports with full reboot of win10 between each change, still same behavior...

     

     

     

    Please advice

     

    Thanks so fare

     

     

    Brgds

    S.

  5. Posted · Edited by User4355

    Hi,

     

    Unable to get the WebFIP to work, when I start to enable / change or add gauge to the  WebFIP" meny,... hole Lorby AAO just "crash" or "end/quit".... So I then need

    to restart the AAO again please advice ?

     

     

    And if I check the url for the WebFIPs it just empty, assume this not normal, I also discovered if I click in the url field(WebFIP windu) AAO seems to end/crash and I need to restart AAO.

    See pciture here

    https://rushfiles.one/client/publiclink.aspx?id=IVMNjUPSxX

     

     

     

    Brgds

    S.O

  6. Posted · Edited by User4355

    Hi,

     

    ah okay understand, starts to see some lights :-), ...

     

    - Are the little gauges also dead or are they showing values?                          -->     Yes they are all "dead" ->no values.

    - Are only some buttons not working or none at all?                                         --> none at all.

    - In the AAO actions on the StreamDeck there is a "Connection" button           --> you  mean a "Reset Conenction" button ?    (do not have any "connection button")

     

    - check if "lorbysi-content-hooks" is still in your MSFS Community folder.        -->  Yes its there v1.3 as fare I can see.

     

    🙂

     

    Brgds

    S.O

  7. Posted · Edited by User4355

    Hi,

     

    Thanks so much so fare,

     

    Sorry 🙂...yes my actual problem is that non of my "Steamdeck profiles"  works anymore, Meaning when I press one of the button on my steamdeck, for

    example > press "Parking" or "Batt" button on my Steamdeck XL nothing happens in my 172.

     

    After all testing for/back++ time consuming :-), ...was thinking it make no sense to start MSFS as long the wepapi "test"(browser command not working) or will this be wrong?

    And if understand correctly AAO is a actual kind of webserver which then the plugin is accessing right?

     

     

    Brgds

    S.O

  8. Posted · Edited by User4355

    Hi,

     

     

    Everything was working perfect until I upgrade the AAO Steamdeck Plugin and the Lorbysi AAO to latest ver.

     

     

    Setup:

    - win10  / MSFS

    - Steamdeck XL, v5.2.1.15025

    - Lorby Steamdeck plugin v9.03.

    - Lorby sw run as "admin" and current version is v2.28 b18.

     

     

    I am following the "AxisAndOhs_WebAPI_Troubleshooting" but have a quick q, when to test this wepapi port I only need to start/run Steamdeck sw and then open a

    web browser and run feks this command http://localhost:9080/webapi?dev=1&chn=5&btn=4  right ?   (No need to run Lorby AAO yet right or ?)

     

     

     

     

    My Problem:

    - If I do this above, meaning pasting in the command into a browser it "fails" will error msg «Unable to connect, can’t establish a connection to the server at localhost:9080".

     

     

    To Info:

    - Have triple checked this port is not in use by other sw, verified by netstat & tcpview.

    - Followed the manual step by step,

    - Tried to reinstall both the "Lorby Steamdeck plugin" and "Lorby AxisAndOhs", 2 times.

    - I try to run as little sw as possible to diag further, and advice very apricated.

    - Even if I try to run both Lorby steamdeck plugin(Steamdeck sw) and Lorby AAO it fails all times with error msg described in "My Problem".

     

    - Tried to change the

    Lorby plugin file "settings.js" to both "myIP / 127.0.0.1 and localhost / with Steamdeck shutdown and start (no close and open).

       Even tried to restart win10 between each change!

     

     

    Would also be nice if possible for someone to explain how all the "sw" hangs together or connected togheter, MSFS / Lorby AAO / Steamdeck plugin and so on, Sorry

    but struggling to get the "clear view" 🙂 .... (maybe a little drawing like a "diagram" would make it much easier to understand 🙂 )

     

     

     

    Thanks in Advanced

     

    Brgds

    S.O

     

     

  9. Posted

    Hi "Lorby",

     

    Yes I followed the troubleshooting manual , step by step 🙂 and have also restarted my computer, but seems still not working.

    * Even tried to delete my Steamdeck profiles and readd them again, still no luck...

     

    Then I tried a different("port-B") not port 6080, just to be sure for checking/verify my setup and then suddenly it worked 🙂 🙂 🙂 .

    * Tried actually to set it back to 6080 and rerun the "http://localhost:6080/webapi?dev=1&chn=5&btn=4"  it "output"  "OK" in the browser but

    was then back to my issue again, no buttom worked on my steamdeck!.

     

    So then I move it back to "port-B" and all worked again :-), so seems it may have been some local-port issues on my computer!!.

    (But little strange it happend after I upgraded my fsuipc/Linda or maybe just a coincidentally, no clue).

     

     

    Conclusion:

    Issue is solved and feel free to mark it as solved. 🙂

    * Thanks for you support :-).

     

     

    Brgds

    SO.

  11. Posted · Edited by User4355

    Hi "Lorby_Dev"

     

    Thanks for the feedback :-).

    -   Yes I can confirm,Lorbysi-content-hooks(v1.3) is still in my community folder.

    -  Only have two Steamdeck XL profiles, one for "DC6" and one for "c172". (so non of these two profiles are working).

    -   "Little gauge" do not work either, "blank" on my Steamdeck XL,..so looks there are no "2-way" communications. * check this link below   

    https://rushfiles.one/client/publiclink.aspx?id=mLZG2zvjeX

     

    Stopped working, >

    Means when I press one of the button on my steamdeck, for example > press "Parking" or "Batt" button on

    my Steamdeck XL nothing happens in my 172. (just to clarify, only using the stock 172 no addon).

     

    Not sure if this make it more clear or unclear 🙂, are there any logs to check or a way to diag this further,

    * A way to check that the API on port 9080 is working correctly, I have checked my firewall 3-5 times and should be correct, but a way to validate that it actual work (?). 

     

    Brgds

    SO

     

     

     

     

  12. Posted · Edited by User4355
    add more add text

    Hi,

     

     

    After upgrading my fsuipc/Linda to latest ver, all my Steamdeck XL "Profiles" (c172/dc6) stopped working!., very strange!

    Assume there is an issue between AAO Steamdeck Plugin and the MSFS sdk or not sure..(?).

     

    * Followed the "AxisAndOhs_WebAPI_Troubleshooting" but all looks fine. (and strange it just stopped working after upgrading fsuipc/LINDA).

    * Tried to start MSFS without Fsuipc/linda but still same issue.

    * Tried to uninstall / reinstall Steamdeck XL sw, and during uninstall I also deleted all files/folder in "app/roaming/Elgato".

     

    Setup:

    - win10  / MSFS

    - Steamdeck XL, v5.1.3.14750

    - Lorby Steamdeck plugin v6.09 - 08.12.2021 (6.10).

    - current use FSUIPC7 v7.2.13 / Linda v4.05.

    - Profile used on Steamdeck xl "PMDG DC-6 profile for StreamDeck XL" and "C172 G530.streamDeckProfile".

    - Lorby sw run as "admin" and v2.22 b43.

     

    Logs:

    In Steamdeck xl, logs files there is only one line, see below, no error msg rgds the plugin.

    "12:10:37.918                     StreamDeck                        ESDPluginManager::LoadPluginsInFolder():        Loading com.lorbysi.aao.sdPlugin..."

     

     

    Any Advice very apriciated

     

    Brgds

    SO

  13. Posted · Edited by ScotFlieger

    Hi,

    Actual my issue was back after an reboot of my pc.., reported back to ScotFlieger and he actual created/fixed an new update found here:

    https://www.avsim.com/forums/topic/341971-pmdg-737-ngx-module-415b-9-jun-2020/

    Install it.

    - Then go to /linda-cfg/aircrafts/pmdg 737ngx/ and delete your existing config-mcp.lua file.

    - Restart P3D with the 737NGX and start LINDA.

    - LINDA will create a new config-mcp.lua.

    - You can check this by selecting the  MCP Combo page and checking the MCP tab. It should be populated with NGX_ functions.

    Great thanks again for fixing my issue 😊, fantastic support.

    Brgds

    S.O

    • Upvote 1

  14. Posted · Edited by ScotFlieger

    Hi,

    Issue solved with help/assist from Scotflieger.

    Feedback from Scotflieger:

    "You appear to have changed the name of your PMDG 737NGX file with the suffix _old. This is not necessary. Try renaming

    the /linda/aircrafts/ and /linda-cfg/aircrafts folders back to the original name."

    Yes I actual did rename these original folders for pmdg because I tried to fix the issue my self, didnt help, have now renamed them back and now all works just fine 😊!!.   (strange…maybe a rename and copy/++ and then rename back to old/orignal names fixed my issue.)

    or maybe this "There was an issue with the new PMDG 737NGXu module until I put a fix in LINDA 3.1.1 to allow the modules to correctly select between the old and new aircraft add-ons".

    Anyhow huge thanks🙂 for your support,

    * Ticket closed.

    Brgs

    S.O

    • Upvote 1

  16. Posted · Edited by User4355

    Hi,

     

     

    Not sure if this is right place to ask for advice, but have some issue with my mcp combo.., Tried above but didnt solve my issue.

     

    Issue:

    If I change for example changing the headings switch in the virtual cookpit it will be updated on the mcp combo, but if I turn heading switch on my mcp nothing happens in the plane. Looks like there is only one-way communications. Is there an easy way to reset config for the pmdg 737-800 NGX or how do I diag this further? To clarify only has this issue with the pmdg 737nxg. If loading any other planes mcp works just fine.

     

     

    My rig:

    - P3D v4.5

    - Linda v3.1.1854

    - fsuipc 5.156

    - only issue with the pmdg ngx, (running latest version available 6/6-20)

    - mcp combo (1)

     

     

    please avvise

  18. Posted · Edited by solsen

    Hi,

     

    Has couple of question regarding the Maddog-X, since unable to read from their forum before being a paying member,

    anyhow someone in here are able to help/advise please  🙂

     

    QUESTIONS:

    1.  How are the Maddog-X VC/cockpit texture compare to PMDG 737-NGX and the Q400 MS.

    -  Looked into several youtube videos and vc/cockpit texture often looks a little "flat" and sometimes blurry!

     

    2. Think I read somewhere they will develop option for shared cookpit, is this true ?

     

     

    Anyone has any comments, please advise 🙂

     

     

    brgds

    Søren

     

×
×
  • Create New...