warning23

hello there, so ive got an old 6700 cpu with: -Geforce 970 with 4 monitors connected: ´Three of them count as 1 display thorugh straight dp ports ( Nvidia Surround mode ) ´4th one through straight hdmi. -Geforce 750ti with 3 monitors: ´One thorugh Vga adapted to DVi to the card ´One straight DVI ´One straight hdmi Works well and therefore i dont want to dispose of it yet so ive build a new system which consists of: 12700k with: -Geforce 980ti with same as above 4 monitors: ´Three of them count as 1 display thorugh dp ports ( Nvidia Surround mode ) ´4th one through hdmi. BUT TROUBLES STAR HERE: Geforce 730 One monitor straight DVi One monitor straight Hdmi AND WHEN I CONNECT THE LAST MONITOR STRAIGHT VGA THEN THE MONITOR IN THE 980TI CONNECTED THROUGH HDMI DISCONNECTS. is there any way to fix this? i dont want to uninstall the 750ti in the old computer before running out of options. Many thanks in advance.

ahm, i assumed the ops title "2 VR headsets at the same time" and post explanation was clear enough. Nevermind then.

You are asking for the wrong hardware, you need a forcé feedback yoke ( too expensive ) or joystick. ( these have to be second hand , SideWinder 2 or Logitech g940 ) Trimming in sims without forcé feedback is unnatural, thats why you have autotrimming in the a320. Either fly in autopilot, buy a forcé feedback yoke or joystick or just get used to it.

im am buying either hp reverb g2 or pimax 8kx so i need the extra beef for the high res, when Will this cpu be available for purchase?

can two people be in the same cockpit at the same time? if so how is your performance? what are your pc specs? in what sim are you doing this? xplane? msfs? p3d?

please modos delete muy post, wrong thread

Hi, im flying with 2d panels and multimonitors and every time i open and undock one a reshade welcome message pops up and freezes the 2d panel when i move it through my multimonitor setup. I´ve tried uninstalling it but the message still ops up. Any way of getting rid of this annoying thing?? Im using tomatoshade so i dont think i need reshade at all and even if i need it im just fed up of this. I would love to use reshade without this message but...

Nevermind i figured out hoow too get the codes by myself

So, fed up of classic Spad and Linda not being able to make the saitek radio panel work i decided to purchase Spad.next. So far so good because now i have several buttons and rotary knobs working in my saitek multi.panel but im missing the rotorbrake codes for the rest of functions of the autopilot. Does anyone have a list of the codes specially for the MCP and the EFIS? I only need these In linda there is a comment from the autor saying he wont reléase these codes.

yeah but im my case i would like to assign zorder=0 because i want that main panel to be below the main view and not block it Last year i was using p3dv4.0 with PMDG and this issue didnt happen. This is 4.3 with fslabs

i dont think so. Im thinking it may be a prooblem with simconnect because when active sky is not running the knobs on the saitek multipanel work as assigned per mouse macros. I tried Linda and doesnt work either. And then the radio panel doesnt even lit up.

So i have been able to install classic spad 0.5.1 in p3dv4 with latest fsuipc. Stock p3dv4 everything Works fine and macros are awesome but when i turn on active sky the macros in my saitek multi panel wont work anymore. Any ideas?

https://imgur.com/a/oJljDsM As you can see in the photo i want to resize the main 2d panels but the external view to be still on top so it doesnt block the external view like in the photo. In order to achieve this im pretty sure i have to modify the panel.cfg line called " zorder" in the case of that panel is zorder=2 but if i put 0 the FSLabs a320 when loaded will CTD p3d. If i put zorder=99 it doesnt CTD but the panel is still blocking the external view Is there anyway to change the zorder of the external view in p3d itself or am i stuck with this?

delete

Unlike the maddog developers maybe coolsky at least consider homecockpit builders and attach some 2d panels with the plane.

the ATR 600 comes only with Thales. It is an only FMS based aircraft. The 500 is the one with honeywell or no FMS at all.

Well thanks anyway. At least it is a consideration!!

Can you guys reléase the plane with a set of 2d panels?? ( overhead, dash, fgcp + lateral auto/man speed magenta and the ewd+mfd+radio/nav controls below the throttle quadrant and below the mcdu´s would be sufficient ) So far planes like maddog and others have completely disregarded multimonitor homecockpit builders and it is a shame.

Ok, fixed, in the config tool had to invert the axis and get rid of all dead zones

anyone with these pedals?? Have fllowed instructions but the airplane wont barely brake plus brakes are reversed. Tried the config tool and nothing

So, after buying Saitek Multi panel for Flight 1 atr in FSX and discovering FSUIPC and macros the bug of building myself a better cockpit has bitten me. Of course i would like to do it in P3DV4 but just discovered that LM doesnt support macros in this versión. if so, how can i make my own modules and controls ( rotary knobs, push button, switches ) etc made asignable with p3dv4? LVARS? Linda?? Is there any video or tutorial that explains this nicely? Thanks.

One of the problems with FSX and P3d is the airports are from 2009. Is this fixed in FSW?

If the knobster feature in latest air manager versión could be implemented without air manager itself , that and the touchscreen would be almost the perfect solution

Would like to know if there are any plans to realease a 2d panel pack for the p3dv4 versión. I left a comment in the Facebook page some months ago but cant find it anymore. I would use the 2d panels from the fsx versión but they are not compatible gauge wise since its 64 bits. For us multimonitor users and home cockpit simmers 2d panels are the only option. Exdok is unrealistic compared to what we do.

This will fix it: http://uraster.com/en-us/products/usbenhancedpowermanagerdisabler.aspx