Jump to content


  • Content Count

  • Donations

  • Joined

  • Last visited

Posts posted by Eytan_Ofir

  1. I followed the procedure.. also with the fslabs i get flashes when changing freq and the qnh dosent work.. i really dont want to deal with all of this. how can i make linda completely ignore the radio panel? i tried disabling it in the joystick and put the dashes in the editor but nothing worked

  2. Hi. using the 737 NGXU 

    when trying to change the qnh on my radio panel it changed for a second then returns to whats in the sim. its like its stuck or somthing..

    is there a way to solve this issue?


  3. On 7/26/2021 at 3:39 AM, byork said:

    Hard to guess.  Are you sure you're following the manual to the letter?

    Something must have change somewhere.

    Try deleting this file:


    AppData Folder\FS2Crew2010\Versions\QW787\SavedData\FS2CrewData.ini


    Then re-install again.


    i tried deleting it but it did not solve the issue. i reinstalled everything again but still the fo does not open the checklist.. it was working well for a year before

  4. Hi 🙂

    for some reason the FO is not operating the ECL. i have not changed anything and it was working fine..

    he does clicks buttons on the overhead and lower flaps down but he will not open the checklist and even if i open it he is not ticking anything. however he is closing it

    tried reinstalling both (cleaned all files)

    any solution to this problem?

    thank you very much

  5. 16 hours ago, byork said:

    Haven't heard anything saying it wouldn't work.

    Just remember to "re-enable" FS2Crew so the FS2Crew entries can be re-added to the panel.cfg file.



    Hi thank you for your response.

    i have tried reinstalling fs2crew for the 787 and enabling it again (on the left DU of course) but i have tried all of them just to make sure

    for some reason it stays deactivated.

    is there any chance you could send me a panel cfg where it is enabled? i could edit it manually

  6. 1 hour ago, Bert Pieke said:

    I am not sure what "the sim" is, but the RXP GNS gauges can talk to FSX/P3D or XPlane just fine.

    Whoever came up with the interface between RXP and "the sim" will have to figure this one out, I would think..

    For FSX/P3D, the RXP GNS uses the standard flightsim variables, either COM1/NAV1 or COM2/NAV2.  You seem to be able to add a radio popup to "the sim", so you may know more about the coding.. 🙂

    thank you very much for responding. i found another topic and now im thinking that maybe the comms are disabled and thats why they all show 100. i will have to check if thats correct in the aircraft.cfg

    thanks again

  7. so my problem is a bit weird but i would love to get some help

    I am taking care of tech stuff for a full piper archer simulator at an aviation school

    its the archer RTD from Frasca and its using 2 430's by RXP

    the one problem we have is there is no DME in the sim... so i decided to try some stuff.

    i added a pop up 2d DME panel to the panel.cfg and this way i thought that when i will tune a nav freq on the 430 the dme will show but it didn't work.

    after adding the radio panels to try to see if the freq is tuning only in the GPS or in the sim too i sew that all of the nav radios and freq in the sim are stuck at 100.0 (picture attached-http://prntscr.com/y9fu2f)

    and that's why i am not getting a reading from the pop up dme (witch works with other aircrafts)

    is there any way of syncing the rxp 430's freqs with the sim? if not do you guys know why are all the freqs stuck on 100? i cant move them at all

    i know its frasca's problem that we don't have a DME but they said they cannot do nothing about it.. intresting how they are selling an rtd for instrument practice with no dme

     i thought maybe you guys can help us find a solution

    thank you very much


  8. On 6/2/2020 at 6:44 PM, byork said:

    On my machine, locked to 88 fps, my frames bounce up and down, plus or minus 15, at about 55 fps, with or without the FS2Crew Panel open.

    Having the FS2Crew panel open or closed makes no real difference.... at least on my machine.




    i think this shows the problem.. both the fps counter and the visuals

  9. Again. The fo is using the checklist on the right cdu right? If using the checklist on the cdu screen and you want the fo to return to the cdu screen he should press cdu not nd!

    If he presses nd it will appear in the cdu screen

    Why navigraph charts? It only happends when fs2crew windiw is visible.. if i press C to hide it the fps goes up again

  10. hi. i the last change log and in the fs2crew settings it says that the fo will press nd once checklist is complete...

    why nd??

    my fo opens the checklist on the right cdu and should press "CDU" when checklist is done.

    its not happening...

    plus after i open fs2crew window. the sim is laggy.. i have done various tests and when i close the window the sim is gaining back 10-15 fps.. bringing the window back takes these 10-15 fps away.

    never happend before with fs2crew products.


  11. Hi. for some reason the fo finishes the checklist but dosent return to the cdu.. so after every checklist i need to return to the cdu...

    is that normal?

    also maybe im just used to the other voices.. but for some reason the uk voice set dosent sound very clear and nice like the other products..


  12. Just now, suchw said:

    thats weird i had actually removed V4 so i had to reinstall V4 then latest version of Utlive, copied the utraffic folder to documents in P3dV5, ran P3d Got the splash screen and the add screen then when in V5 I saw the initialising Ultimate Live Traffic in the top left corner of the screen. Did you see all of that happening

    Yes. Everything is happening as it should.

    But no traffic is shown

    Btw no need to install v4 again.. just change the diractory in regedit..

  • Create New...