Pedrozo Mario

Hello! Finally, I could do it. Now I'm requesting some aircraft developers to modify and create a 3D Panel in order to make it the same as the real airplane. If someone wanted my T-35 Pillan with a poor 2D Panel I can upload the file and test it with X Plane 10/11. I'll accept some advices or recommendations. 🛩️😃

Hi! Just I want to tell that I could finally solve the problem. I saw the page that you linked. I configure the simulator and the gtn executables to work with the discrete graphics (AMD GPU). Before, they were using the integrated one (Intel HD Graphics). The simulator and the plugin run well, but the fps are low (I was getting 19-25 fps and now it showed 10-12 fps) but it doesn't matter. I can solve it by lowering the settings. Thanks for your help! I appreciate the support you give to the RXP customers.

The GTN trainer run perfectly by itself, I'm able to handle most of the functions; I don't say all of them because there are some that I didn't try on. I saw that the command line "gauges = " is empty Maybe because I unchecked the GTN 650 after it freezes. I do this before shutting down the simulator. I will download the new version of the Reality XP to see if there is a miracle. I'm seriously wondering what the problem is.. Thanks for your support.

Ok, I'll send you now the information: the content of the .ini file (Carenado A36 Bonanza): The specifications of the driver are here: - Dell Updates: It was only the BIOS. But I tried anyway with the same result - GTN in the default Baron58 It doesn't work, too. Always the same. It freezes when I use the map or touching to change the frequency. Specificly, at the moment I touch the first digit.

Hello, I wrote that code and it doesn't work yet. I can send pictures of the problem, send my *.ini file or may be if you want make a remote desktop connection, you can do it. Thanks for your support.

I downloaded the Trainer's Pack that Paraffin showed me. It isn't compatible with X Plane 11 and 10. So, I installed the demo version of X Plane 8 in order to modify the aircraft. I investigated about the ways I can convert this plane and I should do it with the v8 to the v9, v9 to the v10 and so on. The other way is to see the parameters of the plane in Plane-Maker 8 and open the Plane-Maker 10 to make a new aircraft and trying to copy all these parameters. It's difficult, but possible. I'll take some time.

Hi, I would like to report again the same error of the program. I tried to do everything you said before. I installed the GTN Trainer v6.50, I updated the RealityXP Software with the v2.4.0. I tried it on both X Plane 10 and 11. The result is the same. The screen of the GTN 650 freezes when I try to use the map or to put the frequency of the Nav/Com. No matter what I do, I tried to put the graphics settings in low. This is the content of my Log files: As you can see I enabled Debug by writting DebugValue = 1 and LogTrainer = 1 I hope you can help me with this because the purpuse was to use the GTN 650 inside X Plane to practice some IFR procedures before flying.

I know that Google exists.. but I'm not very good about searching things. I appreciate your help, I hope I can find a solution for this

X plane dot org? Could you please help me how the page is? I don't understand English very well. I've been trying to find the solution in Spanish but it's difficult to. I won't have any problem to pay a fee because I know the dimension of the work

I'll see that old plane, as you said Paraffin maybe someone else can do anything to start my project. I have some manuals that can help and about the cockpit it doesn't matter if I have 3D or 2D panel but I would like to have the 3D one. Our cockpit has some new gauges like an Aspen Avionics EFD1000, a Garmin 650 and a JPInstruments 600. It isn't the analogic version anymore. Thank you Paraffin

Oh, it seems to be difficult to do it, but I have some time.. If I am not able to accomplish this I'll try to find someone else because I am interested on purchasing if necessary.. Thanks Von for your answer

Hi, I'm from Paraguay. I'm interested of building a good simulator system that includes the airplane my government has. I'm refering to the T-35 "Pillan" who is manufactured in Chile by the ENAER. Who knows which company is the best to create the whole design of the airplane? Can I do it by myself? Because I have the airfoil maker, and the Plane Maker that X Plane brings along with the game. I have the Technical Information about the plane, too.

Ok, I'll wait while I'm going to try reinstall the GTN Trainer. I notice that it works very well alone. I'm refering that outside the game, the GTN functions perfectly. The problem occurs inside the X Plane unfortunally to me. Thank you for your support

I can enable and disable the plugin to use the GTN650, but whenever I try to do something the screen (of the pluggin) freezes. I can send a video from my phone by e-mail to give an idea of the error.

18/08/31 11:28:30.515 11280 - ] # win.xpl version 2.5.3.0 18/08/31 11:28:30.515 11280 INFO ] 18/08/31 11:28:35.238 11280 - ] # rxpGtnSim64.dll version 2.5.3.0 18/08/31 11:28:35.238 11280 INFO ] 18/08/31 11:30:06.990 07708 INFO ] 18/08/31 11:34:40.172 11232 INFO ] 18/08/31 11:38:59.584 07760 INFO ] 18/08/31 11:39:37.948 11808 INFO ] 18/08/31 11:44:26.092 09516 INFO ] 18/08/31 12:14:29.108 11636 INFO ] 18/08/31 12:15:00.322 09004 INFO ] 18/08/31 12:15:47.532 15608 INFO ] 18/08/31 12:16:24.407 07084 INFO ] 18/08/31 13:32:13.675 02960 INFO ] 18/08/31 13:35:38.645 15824 INFO ] 18/08/31 13:36:10.718 04248 INFO ] 18/08/31 14:29:07.221 07920 INFO ]