Lidad97

Hey, thank you for your reply, I'm actually aware of this NOTAM, but in the simulator it would be much better if both runways would be activ as there is too much traffic in DUS for single runway operation (when coordinated by Ai). It would reduce many go arounds and the huge amount of ACs waiting on the runway for takeoff....

I'm using MSFS 2020 already from time to time, for me it's working perfectly with 60 FPS. Sure, when I fly into areas like NY I will reduce the settings.

Year true, I think we did a lot already, so I will do a combinaton of point 1, 2 and 3. About 5, I'm still shocked that a RTX 2080 Super is not enough to fly simulator with constantly 30 fps and I don't think that an upgrade is an option anymore. Thank you anyway. I'm looking forward to MSFS to be useable as a simulator instead of a game. Kind regards Elias

Dear Community: I have another question/problem, this time regarding Justsim Düsseldorf EDDLv2. I couldn't find anybody else who has this problem so I decided to ask in this forum. As mentioned in the title Runway 05L/23R is missing. I mean, the scenery is correctly displayed but something must be wrong with the AFCAD. Ai Traffic is only using the other runway and if I'm approaching I'm not able to select this runway on my ATC window. Nevertheless the runway is fully useable. The frequencys are correct, and the runway and all taxiways are displayed as they should. It's a minor problem but still disturbs me in my perfectionism. Has somebody the same problem and know how to fix this? Or does somebody have a different AFCAD which I could try? Thank you and kind regards Elias

Hey Ray, I tried some settings in FSUIPC. Unfortunately the traffic needs to be reduced to a minimum on these airports. Means if I'm landing there I will see not more than 1 or 2 AC with me..... . Of course, there is an improvement in FPS but I'm not sure if I want to pay the price for that😖

Short Update: The FPS have improved by a lot. I'm still not able to fly into JFK or EWR with 20 FPS with AI Traffic enabled. But in other Regions (Germany for example) I have now FPS between 20 and 30 at all times with Traffic enabled. Thank you all for your Support. Kind Regards Elias

Ok thank you:)

Ok, thank you very much for your help. Did you keep the FPS Limiter in the P3D stettings at unlimited FPS with Vsync+Triple Buffering on? And should I change anything in Nvidia Control Panel where I have P3D limited to 30 FPS right now? Thank you all once again for your time and support

I guess I have found the necessary program. I downloaded and started it. But I could still need help with the settings, what exactly do I have to change? Thank you

I mean, I have never heared of it, do I have to put that somehow in my cfg file? Is it via Nvidia Control panel or via MSi Afterburner. I have really no idea and I also don't find anything on the internet that brings me further. How do you manage it?

Hey Bert, thank you for that input but could you please be a bit more specific? Where do I find this RTSS Scanline sync? Regards Elias

Monitor is: Samsung C24F396FHU Curved Monitor 24 inch.

@Mace Hey, thank you for your reply, I have tried your advise, but I'm not sure if it made a difference, if, then it is not huge. I will keep the FPS limited to 30 for now and see how it works. Regarding P3Dv5, as written above this might help but is not a real option simply because of the huge amount of money which I would need to invest again for addons I already have. @Ray: I we try this we need to choose another airport, I use Taxi2Gate EDDM. 55 AC Ground / 47 AC Air / FPS 39 / CPU "0" 100% Adding: VSync+Triple Buffering On: 55 AC Ground / 47 AC Air / FPS 40 / CPU "0" 100% Adding: PMDG 737NGX: 55 AC Ground / 47 AC Air / FPS 37 / CPU "0" 100 % Left Seat: FPS 21 / CPU "0" 100 % Strange, as soon as I click on Task Manager (P3dv4 goes in Background) My CPU "0" load reduces to 20%

Ok, thank you very much for your time, I own you a beer😅 If I should be in GB after COVID. Thanks a lot

Ray, can you tell me how are your FSUIPC Traffic settings? Where have you usually set the limits? And do you know where I can change my monitor refreshing rate?

Maybe created was the wrong word. I used the aircrafts included in the FLAi package and connected them to their flightplans, a lot of work but in my opinion it's worth it. Now I have traffic all over the world flying based on summerflightplan 2018 and 2019. I will try that with FSUPIC as well, maybe it helps. If you, or somebody else has more ideas how to improve the FPS, as mentioned I would be happy with 20 FPS constantly, please feel free to tell me. Thank you all for your Support

Me too, I also created the ai traffic by myself, I used the FLAi aircraft package

@pelgrin21 I have already tried the affinity mask with different (also with calculated) settings, unfortunately that didn't work for me:( Next Test: EDDF, Aerosoft Addon Airport installed: Outside View: 38 FPS / Cockpit View 22 FPS Adding AiTraffic: And this finally brings down to 18 FPS in Outside View and 10 FPS in Cockpit View. Does that really mean that it is impossible to use Ai Traffic in the simulator?

@Ray: I will try to leave HDR off in the next time, maybe it helps, right now there is no FPS difference unfortunately. @pelgrin21: Hey, thanks for trying to help me out, I have only the necessary technical knowledge which you need to be able to fly on a simulator but I'm far away from being an computer expert. Means I'm not familar with MSI Afterburner, Overclocking or Monitor Software, in my case, drivers are all current. As mentioned above CPU Speed: about 4,7 GHz and CPU usage about 15%. CPU Core "0" = 100%, all other cores nearly not used. Yes I have already tried a few affinity mask settings, unfortunately without success. Kind regards Elias

I choose EDXW as an test airport: FPS: Outside View / Cockpit View: 110 / 85 Adding Chaseplane: 92 / 82 Adding Active Sky Weather: 86 / 80 Adding Complex Aircraft (PMDG 747-8): 80 / 38

Ok Ray, I finaly managed to get these screenshots uploaded. I know these are not the lowest settings and we can of course try to lower them a bit, but I just thougt if I don't see any difference I will keep them high.

Regarding the system, it was build by myself, or better said by a friend of mine with me observing😅. I was also already thinking about overclocking but i'm not sure if I should really overclock it by myself with my basic knowledge, and due to COVID border restrictions my friend is unable to help me. I turned VSync OFF, Outside View 135 FPS, Cockpit View 90 FPS. I'm working on the screenshots

Ok, Nvidia Inspector is not used anymore. RESULT YBAS: Default A/C Outside View 60 FPS, Cockpit View: 60 FPS / CPU 11% BUT Core "0" uses about 80% of it's capacity, all other cores are nearly not used. / GPU Load: 40 % Addon A/C (PMDG 747-8): Outside View 60 FPS, Cockpit View: 38 FPS / CPU 14% BUT Core "0" 100%, all other cores nearly not in use / GPU Load: 32% ??? Affirm, my monitor runs at 60 Hz. Thank you once again Regards

Hey Ray, thank you for your reply:) Oh ok, I'm sorry, screen resolution is 1920*1080. I will try this advise with Nvidia Inspector. CPU was at 15%, it was just 1 CPU core which was at 100%. And the GPU as I found out earlier today. But how can it be that a RTX 2080 Super is not enough to fly on P3Dv4. And as already mentioned, I tried to put all sliders to the left, disable and enable shadows, change REX settings and so on.... There was simply no difference visible in FPS and if I have to choose between 10 FPS and it looks ugly and 10 FPS and it looks nice then I will take the second option. Regards Elias

I checked again (PMDG 747-8; KEWR) GPU Clock is around 2 GHz, and GPU load is nearly 100%.