Jump to content

ng0057a5

Inactive Members
 View Profile  See their activity

  • Content Count

    35

  • Donations

    $0.00 

  • Joined

  • Last visited

Everything posted by ng0057a5

  1. ng0057a5
    Of course no but this scenery is designed for P3d4. No?... 🙄
  2. ng0057a5
    Looks good in fact but by night, it remembers me the FS2004 hours. I don't like the apron lighting.
  3. ng0057a5
    I know but it still works for me with FPS limited at 60. Just try and see 😊
  4. ng0057a5
    [BUFFERPOOLS] UsePools=0 => FPS increased FFTF=0.1 works very well for me.
  5. ng0057a5
    Hello! You can play with this in the Prepar3D.cfg [GRAPHICS]Day_Threshold=XXXNight_Threshold=XXX The inconvenient is to see also the city lights and night textures on daytime. See here
  6. ng0057a5
    I thought it was the default value in any case 🤔
  7. ng0057a5
    For me, FFTF at 0.1 and FPS locked at 60 combinated with others parameters allow me to see autogen during the whole flight even at FL370. 😎
  8. ng0057a5
    In my opinion, if you use to fly in VFR rules with a small aircraft, keep XP11 with ortho sceneries. If you want to fly an airliner in IFR, go to P3D.
  9. ng0057a5
    AM and HT were mandatory with my old i7 3770K. As my new i7 9700K has 8 physical cores, no need and performances are just insane 😊
  10. ng0057a5
    97842 kg burned for a so short flight? How many holding patterns did you do?😁
  11. ng0057a5
    Hi! Once the original shaders restored, just uninstall the v24 and download the v27 directly from their site.
  12. ng0057a5
    Yes but the difference is that you have to buy PFPX also.
  13. ng0057a5
    Under one condition: If you want to use an up to date navigation database, you have to pay a Navigraph account.
  14. ng0057a5
    Limiting FPS will degrease the frame rate but will solve autogen and blurries issues. Mine is set to 60 (for a non 4K 60 Hz monitor), everything is OK. Maybe my specs are higher than yours?
  15. ng0057a5
    Try limited FPS (60 or 30) [Display] TEXTURE_BANDWIDTH_MULT=160 TextureMaxLoad=18
  16. ng0057a5
    H.T. combined with Process Lasso helps a lot with a 3770K. Just have to let the core 1 free (not the 0).
  17. ng0057a5
    My previous specs were the same as yours. Despite I had found good settings to avoid stutters, the FPS was rarely above yours. Daylight came back after buying my new PC (see below).
  18. ng0057a5
    My home airport: Aerosoft Toulouse professional 😊
  19. ng0057a5
    I just wanted to say that I don't need it anymore. My CPU is a 8 real cores without HT and p3d runs much better without PL and is more stable (I agree with you RichieFly). However, using PL with the previous CPU (HT ON) had improved a lot my sim experience.
  20. ng0057a5
    It depends on the CPU you are using. It was very usefull with my old i7 3770K, worse and useless with my new i7 9700K. I have uninstalled it.
  21. ng0057a5
    Ha! Ha! Ha! Back to memories? My 1st PC was a 286 16MHz, 1 Mo RAM and HDD 200 Mo. Even FS4 was very slow on this machine. I don't remember the graphic card but I know it was not a VLB one. How happy I was when I had sold it to buy my 486 DX2 66 Mhz with 4 Mo RAM!!! How happy I was when I saw the Cessna photographic panel with FS5.0! 😁😁😁
  22. ng0057a5
    I have the same CPU and motherboard as yours with a RTX 2070 and 16Go RAM. I have no stutter and P3D works like a charm. I can fly the FSlabs A320 with almost 30 FPS and complex graphic settings. I also agree with vgbaron about a full OS and P3D install.
  23. ng0057a5
    That's what I often read but believe me, it works. I get up to 20% of FPS and no stutters. You just have to compare the FPS at startup with and whitout the tweak.
  24. ng0057a5
    Here are my settings allowing me to see the autogen even at FL330 with the FSLabs A3XX: [BUFFERPOOLS] UsePools=0 [MAIN] Fiber_Frame_Time_Fraction=0.1 [DISPLAY] Texture_bandwith_Mult=180 Upper_FrameRate_Limit=61 TextureMaxLoad=18 [Scenery] AUTOGEN_DRAW_DISTANCE=24000.000000 MaxRegionsPurgePerFrame=16 [TERRAIN] LOD_RADIUS=6.500000 AUTOGEN_VEGETATION_DENSITY=4 AUTOGEN_BUILDING_DENSITY=3
  25. ng0057a5
    Now resolved. As I use AS and ASCA on a remote PC, the connection between them seemed to be not enough fast. Changing the connection of the remote PC from Wifi to Ethernet/CPL (50 mb/s to 100 mb/s) has solved the problem.
×
×
  • Create New...